• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2011년도 한국컴퓨터종합학술대회논문집 Vol.38 No.1(B)
• /
• pp.434-437
• /
• 2011

낸드 플래시 메모리는 하드 디스크와는 다른 여러가지 특성 때문에 논리 주소를 불러 주소를 변환해 주는 주소 변환 계층(FTL)이 필요하다. 최근에 고성능의 저장 장치를 제공하기 위해서 페이지 수준의 주소 변환 기법이 많이 사용되고 있는 데, 이 기법은 매핑 정보가 너무 커서 메모리에서 매핑 정보를 관리하기에는 힘들다는 문제와 데이터의 접근 지역성을 잘 활용하지 못하는 문제가 있다. 본 논문에서는 스토리지의 주소 공간을 유닛이라는 단위로 분리하여 페이지 수준의 주소변환을 사용함으로써 매핑 정보를 크기를 줄이고 또한 접근 지역성을 활용하여 가비지 컬렉션 오버해드를 줄이는 유닛 레벨 주소 변환 기법을 제시한다. 실험결과 제시한 기법은 페이지 매핑 기법보다 랜덤 접근 패턴에서 가비지 컬렉션 오버해드를 40% 감소시켰으며 매핑 데이터 량도 38% 감소시켰다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.250-254
• /
• 1998

Pump-storage power plants, which pumps water from the lower reservoir to the upper reservoir using the extra electronic power at night and generates the electronic power in the daytime, are more increasing. Currently it has a tendency to be high-head large-capacity machines. So in the processing of design, we need to know the vibration characteristics of pump-turbine shaft system sufficiently. In this paper, we developed the computer programs for analyzing pump-turbine shaft system considering magnetic force of generator, hydraulic force at runner, dynamic characteristics of guide bearings and the effect of add mass of water. And the superiority of this program was verified by applying it to the real model and calculating high quality critical speed, natural mode and unbalance response.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2003년도 가을 학술발표논문집 Vol.30 No.2 (2)
• /
• pp.91-93
• /
• 2003

본 논문에서는 대용랑 스토리지를 공유하는 스토리지 클러스터 시스템을 위한 매핑 테이블 기반의 스냅샷 기법을 제안한다. 스냅샷 상태 비트를 이용한 디스크 기반의 스냅샷 기법을 개선한 스냅샷 상태 테이블을 메모리에 유지하는 스냅샷 기법을 제안한다. 스냅샷 상태 테이블은 최초 할당 비트(FAB:First Allocation Bit)와 스냅샷 상태 비트(SSB:Snapshot Stautus Bit)로 구성되고 기존 스냅샷 기법이 갖는 문제점들을 해결한다. 스냅샷 생성 시 대상 저장 장치에 대한 I/O의 중단없이 데이터의 일관성을 보장한다. 또한 쓰기 연산 수행 시 COW의 수행 여부 판단을 스냅샷 상태 테이블의 FAB와 SSB를 이용하여 매핑 블록에 대한 추가적인 I/O를 없앤다. 스냅샷 삭제 시 매핑 블록에 대한 접근 없이 COW 수행 여부 판단을 처리하여 성능을 향상시킨다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 컴퓨터소사이어티 추계학술대회논문집
• /
• pp.215-218
• /
• 2003

본 논문에서는 한국우주전파관측망(Korean VLBI Network; KVN)을 위해 현재 미국 MIT Haystack 천문대에서 개발되고 있는 천문관측 데이터를 위한 고속 대용량 저장장치에 대해 간략히 기술한다. 현재 개발중인 Mark 5 시스템은 하드디스크 기반의 Gbps VLBI 데이터 시스템이다. 주요 시스템은 낮은 가격의 PC 기반으로 8개의 탈부착이 가능한 ATA/IDE 형태의 하드디스크 뱅크를 두 개 가지며 1024Mbps 이상으로 고속기록 및 재생이 가능하다. 뿐만 아니라, Mark 5 시스템은 표준 기가비트 이더넷 연결을 통해 e-VLBI를 지원한다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권5호
• /
• pp.52-57
• /
• 2000

Recently large capacity of electric equipment and increasing in atomic power generation are shown. One of the reason is shortage of the electric power supply for air conditioning load during summer. And every consumer is concerning about economical refrigeration and air conditioning system to decreases electric power consumption and decrease in global warming. For these necessities, ice making thermal storage system is required. Therefore, in this paper, the possibility of continuous slurry ice making using flowing organic water solution in cooled circular tube has been investigated. The experiments was carried out under some parameters of concentration and velocity of water solution, temperature of cooled tube wall, and control pressure in tube, As a result, four types of operating conditions in the pipe, that was supercooling, continuous ice making, intermittent ice making and ice blockage, were classified . And it was found that the critical condition for continuous ice making was acquired as a function of these experimental parameters.

• 비파괴검사학회지
• /
• 제31권6호
• /
• pp.616-625
• /
• 2011

Ensuring the designed prestress force is very important for the safety of prestressed concrete bridge. The loss of prestress force in tendon could significantly reduce load carrying capacity of the structure. In this study, an automated prestress-loss monitoring system for prestressed concrete girder using PZT-interface and wireless impedance sensor node is presented. The following approaches are carried out to achieve the objective. Firstly, wireless impedance sensor nodes are designed for automated impedance-based monitoring technique. The sensor node is mounted on the high-performance Imote2 sensor platform to fulfill high operating speed, low power requirement and large storage memory. Secondly, a smart PZT-interface designed for monitoring prestress force is described. A linear regression model is established to predict prestress-loss. Finally, a system of the PZT-interface interacted with the wireless sensor node is evaluated from a lab-scale tendon-anchorage connection of a prestressed concrete girder.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.244-244
• /
• 2012

Polymer memory devices have attracted considerable attention because of their advantages such as low cost potential, good scalability, flexibility, simplicity in structure, and large capacity for data storage. Metal/poly (4,4'-aminotriphenylene hexafluoroisopropylidenediphthalimide) (6F-TPA PI)/metal system has been found to show an electrical bi-stable behavior. Here, we show a novel set-up of 6F-TPA PI/Al sample in which holes are injected by photoelectron emission process instead of direct charge carrier injection via metal electrode. In this process, an irreversible electrical phase transition of 6F-TPA PI is found, leading to a write-once-read-many (WORM) behavior. The photoelectron spectroscopy results measured before and after the switching process revealed that the irreversible electrical phase transition of 6F-TPA PI is attributed to the chemical modification of the carbonyl group in phthalimide moiety.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권5호
• /
• pp.1998-2014
• /
• 2016

In recent years, cloud computing services based on smart phones and other mobile terminals have been a rapid development. Cloud computing has the advantages of mass storage capacity and high-speed computing power, and it can meet the needs of different types of users, and under the background, mobile cloud computing (MCC) is now booming. In this paper, we have put forward a new classification-based virtual machine placement (CBVMP) algorithm for MCC, and it aims at improving the efficiency of virtual machine (VM) allocation and the disequilibrium utilization of underlying physical resources in large cloud data center. By simulation experiments based on CloudSim cloud platform, the experimental results show that the new algorithm can improve the efficiency of the VM placement and the utilization rate of underlying physical resources.

• 전기학회논문지P
• /
• 제67권1호
• /
• pp.37-41
• /
• 2018

In this paper, the ESS(Energy Storage System) is interconnected in order to reduce the maximum load in the distribution system and the target location of the ESS is set to be close to the rated voltage. We also applied the weights to nodes with large capacity and number of customers in the system. In the future, the interconnected location of the ESS was determined until 2029 in consideration of the load increase rated of the system. We propose a cooperative decision algorithm of interconnected location of ESS for Power Distribution System.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 전력전자학술대회 논문집
• /
• pp.447-448
• /
• 2013

This paper investigates a new approach based on the fuzzy-logic controlled methodology that is suitable for analyzing and evaluating large format $LiMn_2O_4$ cell performance via online state-of-health (SOH) estimation for energy storage system (ESS) applications. First of all, the values of the cell resistance R and maximum cell capacity $Q_{max}$ are calculated from three factors such as voltage, current, and time that were measured by discharging/charging sequence. Then, using two values R and $Q_{max}$ previously calculated, present SOH of an arbitrary $LiMn_2O_4$ cell can be estimated using the defined fuzzy-logic inference system. The main advantage of this approach is wide parameters tuning possibility for good correspondence of SOH decay with other accurate estimation method and the possibility to perform suitable online SOH estimation.