• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.1-9
• /
• 2007

To decide the number of road lane is very important and related to the 30th design hourly factor in the design of transportation facilities. But, as the quantitative division of road types is difficult, most planner and designer for deciding the 30th design hourly factors have used the fixed values in our country. In this study, we have analyzed the time series property of the design hourly factors in national highways and developed the model capable of estimating the 30th design hourly factors using real data. The presented model is a simple regression model(DHV = K*AADT), which is applied to the division of road lanes(2 or 4 lanes) and the level of AADT(3 levels). As a results, the simple regression model have better performance than the existing method with respect to MAPE and $R^2$. Also, the variations of the 30th design hourly factors are small. The more traffic volume increase, the more the factors decrease. But, the limitation of this study is to use the exiting method estimating the values of the factors, it is subject to study hereafter.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.6
• /
• pp.699-714
• /
• 2022

The objective of this study is to suggest a safe and economical pillar reinforcement method when very near-twin tunnels with a minimum interval of 1 m passes through a soft zone such as weathered soil or weathered rock. A standard cross-sectional view of a two-lane road tunnel was applied to suggest a pillar reinforcement method for the very near-twin tunnels. The thickness of the pillar was 1 m. The ground condition around the tunnel was weathered soil or weathered rock. There were four reinforcement methods for pillar stability evaluation. These were rock bolt reinforcement, pre-stressed steel strand reinforcement, horizontal steel pipe grouting reinforcement, horizontal steel pipe grouting + prestressed steel strand reinforcement. When the ground condition was weathered soil, only the pillar reinforced the horizontal steel pipe grouting + prestressed steel strand did not failed. When the ground condition was weathered rock, there were no failure of the pillar reinforced the horizontal steel pipe grouting or the horizontal steel pipe grouting + prestressed steel strand. It is considered that the horizontal steel pipe grouting reinforcement played a role in increasing the stability of the upper part of the pillar by supporting the upper load applied to the upper part of the pillar.

• Journal of the Korean Institute of Gas
• /
• v.25 no.5
• /
• pp.78-87
• /
• 2021

This paper analyzes the range and attributes of the traffic information service between domestic public institutions and private companies, and suggests the possibility of joint application of node-link information for each company and the possibility of joint use of private traffic information. For this purpose, the present condition and attributes of domestic and foreign traffic information node-links (link length, node ID number, U-turn information, lane information, left turn information, right turn information, etc.) were analyzed. The analysis targets, the node-link of the national standard node and the two companies were analyzed. The area of the experiment was selected in Jongno-gu, Seoul, where standard-link information is complex, traffic volume is high, and various standard-links exist. The experiment was conducted by comparing and analyzing the traffic information attributes of three types of node-links and performing node-links overlapping matching (utilizing encoding_decoding method), and the possibility of matching node-links and attributes of different specifications was analyzed using Open LR technique.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.6
• /
• pp.97-107
• /
• 2013

On the Staggered Crosswalks, pedestrians cross the crosswalks two times. This method can reduce the cycle, the vehicle delay and the walking distance by increasing the major direction of green time. The safety of pedestrians is also effective. This study suggests the warrant of the facilities of island width and length etc. by considering the road structure and pedestrians. Also this study suggests the standard of the safety through the accident analysis of Staggered crosswalks and General Crosswalks. In the results, accident rate of the Staggered Crosswalks 18.3(100 million vehicle-km) was lower than the accident rate of the General Crosswalks 28.3(100million vehicle-km). By understanding the start point of crossing of the Staggered Crosswalks, the analysis of the location and types of accident suggests the safety zone(spare space). The setting warrants of Staggered Crosswalks are 4 lane over the road and the 2 meter over sidewalk width of island. The minimum length of the Pedestrian island was doubled compared to the crosswalks width. And the maximum length was set by considering the wait time of the pedestrians.

• Journal of Animal Science and Technology
• /
• v.57 no.9
• /
• pp.35.1-35.8
• /
• 2015

Background: An experiment was conducted in Vietnam to test the hypothesis that total dry matter (DM) intake and liveweight (LW) gain would increase in a curvilinear manner with increasing amounts of concentrate offered. Method: There were five treatments: a basal diet of Guinea grass fed at 1 % of LW and rice straw fed ad libitum (T0), or this diet supplemented with concentrate at 0.6 (T1), 1.2 (T2), 1.8 (T3), or 2.4 % of LW (T4). The concentrate comprised locally available ingredients, namely cassava chips, rice bran, crushed rice grain, fishmeal, salt, and urea, mixed manually. Results: Concentrate intake increased from T0 to T3, but there was no difference in concentrate intake between T3 and T4. Total feed intake increased in a curvilinear manner from 4.0 to 6.4 kg DM/d as the quantity of concentrate consumed increased. The substitution of concentrate for grass and rice straw increased with increasing consumption of concentrate and was as high as 0.49 kg DM reduction per kg of concentrate consumed. LW gain increased curvilinearly, with significant differences between T0 (0.092 kg/d), T1 (0.58 kg/d) and T2 (0.79 kg/d); but there were no significant differences in LW gain between T2, T3 (0.83 kg/d) and T4 (0.94 kg/d).With increasing amount of concentrate in the diet, the digestibilities of dry matter, organic matter, crude protein, and crude fat increased, but NDF digestibility decreased. Conclusion: Based on these results, young Vietnamese Brahman-cross growing cattle will respond to a locally-sourced concentrate mix offered at a level of up to 1.2 % of LW.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.4
• /
• pp.921-929
• /
• 2015

Road conditions which obstruct the driver from seeing road markings, such as in the evening or in the rain, due to the lack of a light source gives way to increasing the risk of traffic accidents. In order to increase road safety, the Korea Expressway Corporation set up a pilot project which used high-quality materials along a section of the Gyeongbu Expressway between Daejeon and Pangyo. There is little research on high-quality materials in the field of pavement marking. This study introduces high-quality materials used in pavement materials, presents the results of a survey conducted to examine the effect of the pilot project and analyzes traffic accident data from before and after the implementation of the pilot project. The survey results show that 87% of the respondents were highly satisfied with the pilot project. With the goal of evaluating the effect of the pilot project, this study used traffic accident data provided by the Korea Expressway Corporation accident data and performed a before-after study of the number of traffic. The results of data analysis show that there were 62 and 48 traffic accidents before and after the implementation of the pilot project. In addition, the result of Emperical Bayes Method indicates that there is an 41.7% decrease in the number of traffic accidents as an effect of High-quality Pavement Marking Materials.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.4
• /
• pp.897-905
• /
• 2015

This research suggested the traffic signal calculation model of active transit signal priority using a shockwave model. Using this signal priority timing optimization model, the shockwave area is computed under the condition of Early Green and Green Extension among active transit signal priority techniques. This study suggested the speed estimation method of backward shockwave using average travel time and intersection passing time. A shockwave area change is calculated according to signal timing change of transit signal priority. Moreover, this signal timing calculation model could determine the optimal signal priority timings to minimize intersection delay of general vehicles. A micro simulation analysis using VISSIM and its user application model ComInterface was applied. This study checked that this model could calculate the signal timings to minimize intersection delay considering saturation condition of traffic flow. In case studies using an isolated intersection, this study checked that this model could improve general vehicle delay of more over ten percentage as compared with equality reduction strategy of non-priority phases. Recently, transit priority facilities are spreading such as tram, BRT and median bus lane in Korea. This research has an important significance in that the proposed priority model is a new methodology that improve operation efficiency of signal intersection.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.6
• /
• pp.897-908
• /
• 2019

The objective of this study is to evaluate the field support performance of highperformance lattice girder (BK-Lattice Girder) by using numerical analysis. Three types (50, 70, 95-type) of existing and high performance lattice girders were applied to the cross section of highway 2, 3, and 4 lane tunnels to compare the supporting performance. The numerical analysis was the finite element method and the lattice girder was modeled in three dimensions with an elasto-plastic frame. The ground was modeled as a spring receiving only compression. The load was applied as a concentrated load on the central ceiling of the tunnel section. The yield strengths of the lattice girders were determined from the numerical results to compare the supporting performance of lattice girder. In case of 50-type, the yield strengths of high-performance lattice girders were increased by 6.7~10.0% compared with those of the existing lattice girders. In the case of 70-type, the high-performance lattice girders increased yield strengths by 12.1~14.9% than the existing lattice girder. In the case of 95-type, the high-performance lattice girders increased yield strengths by 13.3~20.0% than the existing lattice girder. As a result of numerical analysis, it was considered that the high-performance lattice girder supported better than the existing lattice girder when only the lattice girders were constructed.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.4
• /
• pp.1-12
• /
• 2010

This paper deals with the transmission interval of vehicle data in smart highway where WAVE (Wireless Access for Vehicular Environments) systems have been installed for advanced road infrastructure. The vehicle data could be collected at every second, which is containing location information of the vehicle as well the vehicle speed, RPM, fuel consuming and safety data. The safety data such as DTC code, can be collected through OBD-II. These vehicle data can be used for valuable contents for processing and providing traffic information. In this paper, we propose a model to decide the collection interval of vehicle information in real time environment. This model can change the transmission interval along with special and time-variant traffic condition based on the 32 scenarios using microscopic traffic simulator, VISSIM. We have reviewed the transmission interval, communication transmission quantity and communication interval, tried to confirm about communication possibility and BPS, etc for each scenario. As results, in 2-lane from 1km highway segment, most appropriate transmission interval is 2 times over spatial basic segment considering to communication specification. In the future, if a variety of wireless technologies on the road is introduced, this paper considering not only traffic condition but also wireless network specification will be utilized the high value.

• Journal of Korean Society of Transportation
• /
• v.28 no.4
• /
• pp.141-156
• /
• 2010

In this paper, understanding there is a limitation with a comprehensive and network approach for the evaluation of existing vehicle and pedestrian environments, the authors focus on developing an integrated approach to assessing these environments. The network evaluation here means the assessment at a three-dimensional level that includes evaluation methods of lines/axes in a spatial concept as well as integration of evaluation indicators being used for vehicles and the walking environment. Grey System Theory (GST) was applied based on the theoretical background for network and comprehensive integrated evaluation, and the evaluation of the vehicle and pedestrian environment was performed by assigning target areas to walking preference zones. As a result of the comprehensive evaluation and analysis by GST, even if the service level is the same as the operating indicators (Highway Capacity Manual) of the vehicle and pedestrian environment, or relatively better, it was identified that the total score could be varied over Grey Category because the observed data are calculated after considering the weights between evaluation indicators by the range of Grey Category on the comprehensive evaluation. Considering comprehensively these points, although the indicators on the operation of roads are relatively good, in the event that the indicators on the safety of roads are bad, it was known that the scores over Grey Category also could be changed. The result is that this evaluation method can be used to evaluate the network concept per lane (per axis) as well as to diagnose the current state by type of urban street in the future.