• 대한교통학회지
• /
• 제20권2호
• /
• pp.93-104
• /
• 2002

본 연구는 거시적 교통류 모형 중 고차연속교통류모형(high-order continuum model)의 개발을 목적으로 한다. 이 모형은 연속류 구간을 대상으로 수행되었고, 그 첫 번째 단계로 유·출입 구간이 없는 차로감소구간에서의 교통류를 묘사하였다. 개발된 모형은 차로변경율을 고려하였으며, 짧은 구간에서, 단기간동안의 교통류 행태에 대한 묘사를 가능하도록 하였다. 본 연구에서 개발된 모형은 우리나라 연속류 시설의 기하구조조건과 운전자들의 운전행태를 고려하여 우리나라 실정에 맞도록 새롭게 적용하였다. 이를 통해 장래에 연속류 시설에 대한 교통제어 전략 수립이나 운영 체계 개선과 같은 교통공학적 관리를 할 수 있을 것으로 기대된다. 모형의 현장적용성을 알아보기 위해, 현장에서 관측한 자료를 가지고 모의실험을 하였다. 그 결과, 교통량, 밀도, 속도의 시간대별 변동을 비교적 충실히 구현해 낸 것으로 판단된다.

• 한국ITS학회 논문지
• /
• 제19권3호
• /
• pp.38-51
• /
• 2020

고속도로에서 공사로 인한 차로폐쇄가 발생하면 병목이 형성되어 혼잡이 발생한다. 따라서 공사구간의 도로 운영효율을 개선하기 위해 다양한 교통관리전략이 개발되었으며, 대표적으로 공사구간 상류에 운영하는 합류제어가 있다. 일반차 환경에서는 혼잡시 운전자가 합류에 어려움을 겪어 전략 운영에 한계가 존재하나, 자율협력주행차는 통신기능을 활용하여 고도화된 교통관리전략의 운영이 가능하다. 이에 본 연구는 자율협력주행차 환경에서 동적합류제어와 차로변경제어를 통합한 교통관리전략을 개발하였다. 통합제어전략은 공사구간 상류의 점유율을 기준으로 조기합류 또는 지연합류를 운영하며, 비공사차로의 차로별 교통량을 균형화 하기 위해 차로를 변경할 차량수를 결정한다. 미시교통시뮬레이션에 자율협력주행차와 전략을 구현하고 분석한 결과 누적 통과교통량, 공사구간 상류의 평균속도 및 네트워크 평균통행시간이 개선되어 도로 운영성이 향상된 것을 확인하였다.

• 자동차안전학회지
• /
• 제9권1호
• /
• pp.6-12
• /
• 2017

Regulation for the testing and operation of automated vehicles on public roadways has been recently developed all over the world. For example, the licensing standards and the evaluation technology for automated vehicles have been proposed in California, Nevada and EU. But specific safety evaluation scenarios for automated vehicles have not been proposed yet. This paper presents safety evaluation scenarios for extraordinary service permission of automated vehicles on highways. A total of seven scenarios are selected in consideration of safety priority and real traffic situation. Six scenarios are relevant with lane keeping and one scenario is relevant with lane change. All scenarios are developed based on existing ADAS evaluation scenarios and repeated simulation of automated vehicle algorithm. Safety evaluation factors as well as scenarios are developed. The safety factors are based on existing ADAS ISO requirements, ADAS safety factors and current traffic regulations. For the scenarios, a hunter vehicle is needed in addition to automated vehicle evaluated. The hunter vehicle performs multiple roles like preceding vehicle, cut-in vehicle and so on. The hunter vehicle is also automated vehicle equipped with high performance GPS, radar and Lidar. All the scenarios can be implemented by driving a lap on a KATRI ITS test track. These scenarios and safety evaluation factors are investigated via both a computer simulation and an experimental vehicle test on the test track. The experimental vehicle test was conducted with two automated vehicles, which are the evaluated vehicle and the hunter vehicle.

• 대한교통학회지
• /
• 제29권4호
• /
• pp.7-15
• /
• 2011

도심 교통체증 감소와 물류의 신속한 이동을 위해 1990년대 초반 등장한 퀵서비스산업은 이륜자동차의 증가를 가속화 했으며, 경제발전에 따라 250CC 이상 대배기량의 이륜자동차들도 레저용으로 급증하고 있는 추세를 보이고 있다. 사고발생추세에서 전체교통사고대비 2005년 5.7%, 2008년 8.3%로 점차 증가추세를 보이며 사망률 또한 증가하고 있다. 본 연구에서는 이륜자동차의 자동차전용도로 통행에 대한 위험도를 알아보고자 서울시 연속류 도로를 대상으로 이륜자동차의 법규위반율과 차로변경 행태, 주행속도 행태를 분석하였으며 사고시의 차량충격량을 PCCRASH 시뮬레이션으로 산출하였다. 분석 결과, 차로변경시간과 평균통행속도가 일반차량과 상이하며 도로정체가 발생할 경우 부적절한 주행행태를 보이는 것으로 나타났다. 정부의 이륜자동차 자동차전용도로 허용 검토에 있어 본 연구는 허용여부를 판단하는데 도움이 되며 이륜자동차의 주행 행태를 연구하는데 기초자료로 활용할 수 있다.

• Journal of Mechanical Science and Technology
• /
• 제14권7호
• /
• pp.730-736
• /
• 2000

In this paper, several tire models (Magic formula, Carpet plot, VA tire, DADS tire and STI tire) are implemented and compared. Since the STI (System Technology Inc.) tire model in the AutoDyn7 program is in a good agreement to NADSdyna STI tire model and experiment, it is selected as a reference tire model for the comparison. To compare tire models, input parameters of each tire model are extracted from the STI tire model to preserve the same tire properties. Several simulations are carried out to compare performances of tire models, i. e., bump simulation, lane change simulation, and pulse steering simulation. The performances in vehicle maneuverability are also compared with the four parameter evaluation method.

• 한국자동차공학회논문집
• /
• 제9권1호
• /
• pp.139-147
• /
• 2001

In this study a path control scheme of simulation models of various vehicles to evaluate their handling characteristic is developed. Based on the forward target method, path deviation error is estimated and the required steering effort to reduce the error is computed by Ziegler-Nichols PID control rule. Velocity control model is also included in the proposed path control scheme to achieve the desired velocity. The path control scheme is implemented on a full vehicle model to perform ISO test procedures, such as steady state cornering, lane change, and sinusoidal input, etc. Through the simulations of ISO test procedures and comparison with actual tests, effectiveness and validity of the path control model is demonstrated.

• 한국자동차공학회논문집
• /
• 제3권3호
• /
• pp.97-108
• /
• 1995

A 3-dimensional double track vehicle model, that has 12-degress-of-freedom, was proposed to analyze handling and riding behaviours of an automotive car. Nonlinear characteristics of the suspension and steering systems of the vehicle model were considered in its equations of motion, which were solved by using the 4th-order Runge-Kutta integration method. Computer simulations for lane change, steady-state handling, and running-over-bump manoeuvres were made and verified by vehicle tests on proving ground. The computed results of the proposed model showed better agreement with test results than those of the conventional 2-dimensional single track model did. Especially they showed good accuracy near the characteristic speed and in high lateral accelerated manoeuvres.

• 자동차안전학회지
• /
• 제6권2호
• /
• pp.23-28
• /
• 2014

Commercial vehicle ESC assessment for curvature road was conducted. The previous study of ESC activation condition for losing controllability utilizing the test protocols of double lane change and sine with dwell method was conducted without considering the geometric complexity of roadway design. Since critical rollover accidents were frequently observed in the exit ramp zone, variety of curve, slope and bank have been added for analysis conditions. Detailed feature of the ramp including location, dimension and design characteristics have been analyzed from the typical trumpet type ramp design. Analyzing accident data from 2008, two specific ramps have been selected due to their complexity in design and severity in steering operation.

• 한국자동차공학회논문집
• /
• 제13권1호
• /
• pp.166-173
• /
• 2005

A vehicle stability control logic for 4WD hybrid electric vehicle is proposed using the regenerative braking of the rear motor and electronic brake force distribution module. Performance of the stability control logic is evaluated for J-turn and single lane change. It is found from the simulation results that the regenerative braking at rear motor is able to provide improved stability compared with the vehicle performance without my stability control. Additional improvement can be achieved by applying the regenerative braking plus electronic brake farce distribution control. It is expected that the regenerative braking offers additional improvement of the fuel economy as well as the vehicle stability control.

• 한국자동차공학회논문집
• /
• 제14권1호
• /
• pp.25-30
• /
• 2006

This study is about an optimum design to improve the kinematic and compliance characteristics of a torsion-beam suspension system. The kinematic and compliance characteristics of an initial design of the suspension was obtained through a roll-mode analysis. The objective function was set to minimize within design constraints. The coordinates of the connecting point between the torsion-beam and the trailing arm were treated as design parameters. Since the torsion-beam suspension has large nonlinear effects due to kinematic and elastic motion, Genetic Algorithms were employed for the optimal design. The optimized results were verified through a double-lane change simulation using the full vehicle model.