• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.2
• /
• pp.187-194
• /
• 1998

In this study, effective multispectral Landsat TM band combinations for a merging with the high resolution IRS-1C PAN data using the IHS method to improve landuse accuracy is discussed. From the pre-classified image using the merged images with TM all six band images(with the exception of band 6 image) and PAN image, a sample data which has ten classes was generated. An evaluation of the overall classification accuracy for the representative seven merged images which were merged using each TM three-band images and IRS-1C PAN image by IHS method for the sample area. The increase in classification accuracy is most significant with the inclusion of two of TM4, TM5 and TM7 infrared band images. Especially, the largest increase(11.8 percent) in landuse classification accuracy were investigated when Landsat TM247 bands were merged with IRS-1C PAN data. The classification accuracy when TM three band image and PAN image were used without merging is higher than result of the case of using the merged images.

• Journal of Environmental Impact Assessment
• /
• v.9 no.3
• /
• pp.177-183
• /
• 2000

The Landsat Thematic Mapper (TM) has suggested that spatial and spectral characteristics would be suited to evaluate water quality of lake. But, TM has not been commonly used for the analysis of in-land water quality, such as surface water temperature, chlorophyll-a, suspended sediments, and Secchi depth in domestic research. This paper summarizes the analysis of Landsat 5 - TM image collected on 22 Feb 1996 for evaluation of chlorophyll-a and surface temperature in the Lake Soyang. And, field measurements collected in the Lake Soyang were used to obtain water optical algorithms for calibration of satellite data. It is concluded that we can assess chlorophyll-a with remote sensing reflectance and surface temperature with thermal band in lake Soyang. However, surface temperature calculated with thermal band of Landsat TM are underestimated. Relationship between remote sensing reflectance and chlorophyll-a using the ratio of TM band 1 and band 3 is as follows; Y = 17.206 - 6.4711 * (Rrs(band1) / Rrs(band3)) $R^2$=0.8762 and, using the ratio of TM band 1 and band 2 as follows; Y = 57.77 - 35.771 * (Rrs(band1) / Rrs(band2)) $R^2$=0.8317.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.6 no.2
• /
• pp.42-52
• /
• 1988

The main object of this study is to prove the effectiveness of Landsat data in detecting the stressed areas in forest by extracting these areas. And also to choose the effective bands for this type of survey and to reduce the effect of shadow in forest to improve the accuracy of classification are the other objects. In this study Landsat-5 TM data is used and image processing techniques such as spatial filtering and ratio are taken to reduce the effect of shadow and to improve the classification accuracy. As a result following conclusions are obtained. First, Landsat TM data is useful to detect the stressed areas in forest. Second, when detecting the stressed area, band 4 and 5 are the most effective. Third, spatial filtering and ratio are useful to reudce the effect of shadow and improve the classification accuracy. Especially, ratio has great effect on improving the classification accuracy between forest and other areas.

• Journal of Korean Society for Geospatial Information Science
• /
• v.1 no.2 s.2
• /
• pp.185-194
• /
• 1993

In this research, the image obtained by TM platformed in the LANDSAT-5 and the terrestrial infrared image obtained by the Thermo Tracer were employed in order to search the distribution of industrial thermal plume discharged into seas. Sea surface temperature distributions were deduced based on the infrared band 6 in the TM image of the LANDSAT by employing the transformal formula provided by the CSFC of the NASA and post-calibration values. The temperature distributions were also obtained with the processing mode of the TH1100 series from the terrestrial thermal image or the Thermo tracer. According to the results of the image analyses with this methods, it was found that sea surface temperatures in shallow coastal area largely affected by the temperatures of the freshwater and inland and that the range and the area of distribution of the thermal plume can be visualized quantitatively. Furthermore, when the terrestrial thermal infrared scanner is used, the more details of the distribution range can be obtained, and the image results are comparable to those obtained from the LNADSTA.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.2
• /
• pp.143-150
• /
• 2013

Recently, environmental issues such as climate warming, ozone layer depletion, reduction of tropical forests and desertification are emerging as global environmental problems beyond national problems. And international attention and effort have been carried out in many ways to solve these problems. In this study, the growth of green was calculated quantitatively using the technique of remote sensing and temperature change was figured out through temperature extraction in the city. The land-cover changes and thermal changes for research areas were analyzed using Landsat TM images on May 2002 and May 2009. Surface temperature distribution was calculated using spectral degree of brightness of Band 6 that was Landsat TM thermal infrared sensor to extract the ground surface temperature in the city. As a result of research, the area of urban green belt was increased by $2.87km^2$ and the ground surface temperature decreased by $0.6^{\circ}C{\sim}0.8^{\circ}C$ before and after tree planting projects. Henceforth, if the additional study about temperature of downtown is performed based on remote sensing and measurement data, it will contribute to solve the problems about the urban environment.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.3
• /
• pp.34-43
• /
• 2005

We will catch the spatio-temporal changes that analyse the unknown topography of Go-Gunsan Islands using Landsat TM satellite images into an unsupervised ISODATA classification and a supervised nearest likelihood classification. Each sedimental topography has the different characteristics according to building the Saemangeum embarkment. We will deal with the distribution of sedimental shapes using ERDAS Imagine 8. 6. The result that classifies specifically topographic properties of our research area be considered to get use of establishing the reclaiming program and predicating the reclaimed sedimental topography. The research area can be classified into tidal flats and sea level using band 4 among 7 bands of Landsat TM. Also band 5 can be used to classify the special unknown shapes of tidal flats. We will clarify the efficiency that spatio-temporal sedimental changes can be extracted through processing satellite images. Therefore, the spatio-temporal unknown topography change monitoring using satellite images is expected to be very useful to clarify whether the tidal flat is generated or not in the Go-Gunsan Islands at the outer side of the embarkment after constructing completely the Saemangeum tidal embarkment.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.7 no.1
• /
• pp.49-57
• /
• 1989

On this study, we performed the landuse classification using the Landsat data acquired before and after reclamation, and extracted the ground temperature from infrared band(TM band6) data. Using the satellite data, it was possible to extract changes of landuses effectively according to the reclamation, and could obtain the thermal characteristics of the reclaimed area and the surroundings by converting infrared data value into temperatures of surfaces of ground and water. The result of this analysis will be used for the land management of large-scale reclaimed area applying the satellite data and related information.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.2 no.1
• /
• pp.9-15
• /
• 2000

The objective of this study is to evaluate the use of RADARSAT and Landsat TM data for the monitoring of rice growth. The relationships between backscatter coefficients($\sigma$$^{0}$ ) of RADARSAT data and digital numbers (DN) of Landsat TM and rice growth parameters were investigated. Radar backscatter coefficients were calculated by calibration process and then compared with rice growth parameters; plant height, leaf area index (LAI), and fresh and dry biomass. When radar backscatter coefficient ($\sigma$$^{0}$ ) of rice was expressed as a function of time, it is shown that the increasing trend ranged from -22--20dB to -9--8dB as growth advances. The temporal variation of backscatter coefficient was significant to interpret rice growth. According to the relationship between leaf area index and backscatter coefficient, backscatter coefficient underestimated leaf area index at the beginning of life history and overestimated, at the reproductive stage. The same increasing trend between biomass and backscatter coefficient was shown. From these results, RADARSAT data appear positive to the monitoring of rice growth. Each band of time-series Landsat TM data had a significant trend as a rice crop grows during its life cycle. Spectral indices, NDVI[(TM4-TM3)/(TM4+TM3)] and RVI(TM4/TM2), derived from Landsat TM equivalent bands had the same trend as leaf area index.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.450-452
• /
• 2003

In the present investigation, an estimation of the growth of heat island development of Tokyo metropolis which accounts nearly 100 sq. km of areal spread has been carried out. Band 6 data of LANDSAT TM (Thematic Mapper) data acquired on August 1984 and 1994 have been used for estimating the expansion of the heat island development. Since the vegetation decrease is usually associated with the heat island development, a ratio of green covering has also been assessed using TM data. In order to establish the relationship with the air temperature, AMeDAS(Automated Meteorological Data Acquisition System) data have been correlated.

• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.262-266
• /
• 1999

Several commercial companies that plan to provide improved panchromatic and/or multi-spectral remote sensor data in the near future are suggesting that merge datasets will be of significant value. This study evaluated the utility of one major merging process-process components analysis and its inverse. The 6 bands of 30$\times$30m Landsat TM data and the 10$\times$l0m SPOT panchromatic data were used to create a new 10$\times$10m merged data file. For the image classification, 6 bands that is 1st, 2nd, 3rd, 4th, 5th and 7th band may be used in conjunction with supervised classification algorithms except band 6. One of the 7 bands is Band 6 that records thermal IR energy and is rarely used because of its coarse spatial resolution (120m) except being employed in thermal mapping. Because SPOT panchromatic has high resolution it makes 10$\times$10m SPOT panchromatic data be used to classify for the detailed classification. SPOT as the Landsat has acquired hundreds of thousands of images in digital format that are commercially available and are used by scientists in different fields. After the merged, the classifications used supervised classification and neural network. The method of the supervised classification is what used parallelepiped and/or minimum distance and MLC(Maximum Likelihood Classification) The back-propagation in the multi-layer perception is one of the neural network. The used method in this paper is MLC(Maximum Likelihood Classification) of the supervised classification and the back-propagation of the neural network. Later in this research SPOT systems and images are compared with these classification. A comparative analysis of the classifications from the TM and merged SPOT/TM datasets will be resulted in some conclusions.