• Korean Journal of Remote Sensing
• /
• v.25 no.1
• /
• pp.71-83
• /
• 2009

This paper is written to analyze possible problems encountered with the existing data for the monitoring of land use and land cover change over the Korean peninsula and, further, to provide technical alternatives for the future land monitoring over the area. The oldest type of non-spatial data related to the land use change are cadastral statistics obtained since 1911. Annual statistics of cadastral data in early years (before 1942) can be used to assess land use change over the area. However, the cadastral statistics after the Korean War are not very appropriate for land use monitoring since the land class in cadastral data does not always correspond with actual land cover status. Majority of spatial data available for land monitoring over the area are land cover maps classified from satellite imagery since early 1970's. To analyze the suitability of land cover maps that were produced by two separate institutes with about 10 years interval, we conducted simple change detection analysis using these maps. These maps were not quite ready to be compared each other, in which they did not have the same class definition, classification method, and geometric registration. To achieve continuous and effective monitoring of land use and land cover change, particularly over North Korea, we should have a standard scheme in type and season of satellite imagery, image classification procedure, and class definition, which also should correspond to international standards.

• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.386-389
• /
• 1999

In this study, visible and near infrared channels of NOAA/AVHRR data were used to classify land use and vegetation types over Korean peninsula. Analyzing forest stand structures and prediction of forest productivity using satellite data were also reviewed. Land use and land cover classification was made by unsupervised clustering methods. After monthly Normalized Difference Vegetation Index (NDVI) composite images were derived from April to November 1998, the derived composite images were used as temporal feature vector's in this clustering analysis. Visually interpreted, the classification result was satisfactory in overall for it matched well with the general land cover patterns. But subclassification of forests into coniferous, deciduous, and mixed forests were much confused due to the effects of low ground resolution of AVHRR data and without defined classification scheme. To investigate into the forest stand structures, digital forest type maps were used as an ancillary data. Forest type maps, which were compiled and digitalized by Forestry Research Institute, were registered to AVHRR image coordinates. Two data sets were compared and percent forest cover over whole region was estimated by multiple regression analysis. Using this method, other forest stand structure characteristics within the primary data pixels are expected to be extracted and estimated.

• Spatial Information Research
• /
• v.15 no.1
• /
• pp.67-80
• /
• 2007

The land cover map represent the state of earth surfaces. It can be used as basic data to explore present conditions of earth surfaces and develop future plans for local areas. To produce the land cover map with efficiency, gathering geographic information from satellite images is important. Exporting, building, and managing processes on the land cover information are needed as well. In this study we aim to review the producing process of the level-2 land cover map in detail and enhance it. h present status of the producing process of the land cover map in Korea is reviewed, problems of the process are explored, and measures for improving it are proposed. The criteria for fixing boundaries and providing attributes for the land cover map are proposed. This proposed criteria may solve problems in a present producing process. The improving measures proposed in this study should be continuously revised in future studies.

• Journal of the Korean association of regional geographers
• /
• v.5 no.1
• /
• pp.137-150
• /
• 1999

Five land use change detection methods were applied to 1994 and 1997 Landsat Thematic Mapper (TM) images of Pook-Gu, Taegu city to determine the land-cover changes between the two dates. The two images were coregistred to UTM coordinates. A post-classification comparison method was the most commonly used quantitative method of change detection. A pre-classification comparison method was more effective method to change detection of land cover than a post-classification comparison method. Two indices were used to assess the accuracies of the studied methods. A image differencing method was found to be most accurate for detecting change verse no change among five land use change detection methods. The difference image of band 2 was found to be most accurate. The overall accuracy and Kappa index agreement of the difference image of band 2 were 0.810 and 0.447.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.4
• /
• pp.100-118
• /
• 2015

This study established a land-cover classification method on objects using satellite images, and figured out distributional patterns of land cover according to categories through spatial statistics techniques. Object-based classification generated each land cover classification map by spectral information, texture information, and the combination of the two. Through assessment of accuracy, we selected optimum land cover classification map. Also, to figure out spatial distribution pattern of land cover according to categories, we analyzed hot spots and quantified them. Optimal weight for an object-based classification has been selected as the Scale 52, Shape 0.4, Color 0.6, Compactness 0.5, Smoothness 0.5. In case of using the combination of spectral information and texture information, the land cover classification map showed the best overall classification accuracy. Particularly in case of dry fields, protected cultivation, and bare lands, the accuracy has increased about 12 percent more than when we used only spectral information. Forest, paddy fields, transportation facilities, grasslands, dry fields, bare lands, buildings, water and protected cultivation in order of the higher area ratio of DMZ according to categories. Particularly, dry field sand transportation facilities in Yanggu occurred mainly in north areas of the civilian control line. dry fields in Cheorwon, forest and transportation facilities in Inje fulfilled actively in south areas of the civilian control line. In case of distributional patterns according to categories, hot spot of paddy fields, dry fields and protected cultivation, which is related to agriculture, was distributed intensively in plains of Yanggu and in basin areas of Cheorwon. Hot spot areas of bare lands, waters, buildings and roads have similar distribution patterns with hot spot areas related to agriculture, while hot spot areas of bare lands, water, buildings and roads have different distributional patterns with hot spot areas of forest and grasslands.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.341-344
• /
• 2007

A major obstacle to classify and validate Land Cover maps is the high cost of generating reference data or multiple thematic maps for subsequent comparative analysis. In case of inaccessible area such as North Korea, the high resolution satellite imagery may be used as in situ data so as to overcome the lack of reliable reference data. The objective of this paper is to investigate the possibility of utilizing QuickBird (0.6m) of North Korea obtained from Google Earth data provided thru internet. Monthly NDVI images of nine months from the summer of 2004 were classified into L=54 cluster using ISODATA algorithm, and these L clusters were assigned to 7 classes; coniferous forest, deciduous forest, mixed forest, paddy field, dry field, water and built-up area. The overall accuracy and Kappa index were 85.98% and 0.82, respectively, which represents about 10% point increase of classification accuracy than our previous study based on GCP point data around North Korea. Thus we can conclude that Google Earth may be used to substitute the traditional in situ data collection on the site where the accessibility is severely limited.

• Journal of IKEEE
• /
• v.27 no.4
• /
• pp.456-463
• /
• 2023

In this paper, we introduce the SSResUNet network model, which integrates the SPADE structure with the U-Net network model for accurate land cover classification using high-resolution satellite imagery without requiring user intervention. The proposed network possesses the advantage of preserving the spatial characteristics inherent in satellite imagery, rendering it a robust classification model even in intricate environments. Experimental results, obtained through training on KOMPSAT-3A satellite images, exhibit superior performance compared to conventional U-Net and U-Net++ models, showcasing an average Intersection over Union (IoU) of 76.10 and a Dice coefficient of 86.22.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1998.10a
• /
• pp.59-65
• /
• 1998

A thematic land cover map of Pusan port area was developed using Landsat satellite TM(Thematic Mapper) image. Two types of digital data which are road and sea water layer are extracted from existing paper map were overlayed over the developed land cover map. SPIN-2(KNR-1000) image was utilized to make a facility map of JaSungDae port. SPIN-2 image, which has a cell resolution of 1.56 m showed higer accuracy than TM image, which has a cell resolution of 30 m for facility mapping. Overall, the techniques of digital mapping using satellite image are very useful, effective and efficient.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.365-367
• /
• 2008

A digital city model represents a 3D environment of a city with various city object information such as 3D building model, road, and land cover. Usually, at least two satellite images with some image overlap are necessary and a complex satellite-related computation needs to be carried out to create a city model. This is an expensive technique, because it requires many resources and excessive computational cost. The authors propose a methodology to create a digital city model including 3D building model and land cover information from a single high resolution satellite image. The approach consists of image pan-sharpening, shadow recovery, building occlusion restoration, building model extraction, and land cover classification. We create a digital city model using a single KOMPSAT-2 image and review the result.

• Korean Journal of Remote Sensing
• /
• v.37 no.4
• /
• pp.763-776
• /
• 2021

This paper introduces a method of selecting priority update areas for subdivided land cover maps by training orthoimages and serial cadastral maps in a deep learning model. For the experiment, orthoimages and serial cadastral maps were obtained from the National Spatial Data Infrastructure Portal. Based on the VGG-16 model, 51,470 images were trained on 33 subdivided classifications within the experimental area and an accuracy evaluation was conducted. The overall accuracy was 61.42%. In addition, using the differences in the classification prediction probability of the misclassified polygon and the cosine similarity that numerically expresses the similarity of the land category features with the original subdivided land cover class, the cases were classified and the areas in which the boundary setting was incorrect and in which the image itself was determined to have a problem were identified as the priority update polygons that should be checked by operators.