• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.3
• /
• pp.46-57
• /
• 2006

The purpose of this study is to develop a GIS-based digital Forest Land-use(FLU) Map Building Process which will be adopted as the map publishment methodology for the official FLU Map notification in 2007. The process is composed of 6 steps, extracting forest lands from Continuous Land Map(CLM), extracting forest land borders restricted by other laws, extracting boundaries between semi- and reserve forest lands, making digital FLU map by integrating spatial and attribute data among the extractions, printing FLU map and FLU register, and re-correcting zoning errors. Through the process, in 1:25,000 and 1:5,000 scale, 14 and 173 sheets of the FLU Maps and it's register were created for the whole area of Hwaseong, Kyunggi.

• Journal of Environmental Impact Assessment
• /
• v.18 no.5
• /
• pp.281-291
• /
• 2009

In Total Water Pollutant Load Management System of Korea, unit load approach based on land register data is currently used for the estimation of non-point pollutant load. However, a problem raised that land register data could not always reflect the actual land surface coverages which determine runoff characteristics of non-point pollution sources. As a way to overcome this, we tried to establish quantitative relationships between the aerial images (0.4m resolution) which reflect actual land surface coverages and the land registration maps according to the 19 major designated land-use categories in Kyeongan watershed. Analyses showed different relationships according to the land-use categories. Only a few land-use categories including forestry, road and river showed essentially identical and some categories such as orchard, parking lot and sport utility site showed no relationships at all between image data and land register data. Except for the two cases, all the other categories showed statistically significant linear relationships between image data and land register data. The analyses indicate that using high resolution aerial maps is a better way to estimate non-point pollutant load. If the aerial maps are not available, application of the linear relationships as conversion factors of land register data to image data could be an possible option to estimate non-point pollutant loads for the specific land-use categories in Kyeongan watershed.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2004.03a
• /
• pp.613-616
• /
• 2004

Recently, in a field of cadastre, a computerization of cadastral map is in progress with great growth of GSIS field. Also, the needs for the integration of land and building information are widely increasing for integral-management and its application of various land related information. Through a revision of cadastral laws to replace the existing 2D-Cadastre with the 3D-Cadastre, a legal basis to register the position of buildings and facilities is prepared in the governmental or civil fields. This paper presented 3D-Cadastre theory that has been studied on Europe and surveyed building position directly with Totalstation at cadastral control point after choosing pilot test area, Also, the most efficient surveying method of registering building in a cadastral map is presented with comparing and analyzing building position after surveying digital orthophoto and digital map.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.4
• /
• pp.133-142
• /
• 2004

As the city grows in population and size, land-use plan increasingly becomes a crucial element in developing a city-wide plan. In the process of developing the land use plan, identifying the present conditions and predicting the future conditions are the most important steps. That is, to understand the phenomena of land-use activities as well as to manage uses of the land efficiently require the comprehensive land use information system. This study intends to construct the land use database utilizing the Cadastral Map and Registered Building Data and to examine and suggest the application areas of the database. The database was constructed with those of Busan Metropolitan City. Using the established data, it shows how to use the database to identify the present conditions in Busan.

• Journal of Digital Convergence
• /
• v.13 no.12
• /
• pp.23-30
• /
• 2015

The current cadastral business is being operated by conversion to a digital cadastral management system through computerized registers (land register and forest land register) and maps (cadastral map and forest cadastral map). Digital surveying methods, such as GPS surveying and electronic plane table surveying, are also used for cadastral surveying. At present, fees for cadastral surveying are calculated based on a standard pursuant to the Construction Standard Production Unit System and an announcement by the Ministry of Land, Infrastructure, and Transportation. In many cases, however, the cadastral surveying fee system announced at present fail to apply the digitalized environment depending on the item. This study sought to analyze the cadastral surveying fee system that requires improvement in the rapidly changing digital cadastral management environment, and to prepare a basis to establish a cadastral surveying fee system suitable to the digital environment by suggesting an improvement method for such system. As a result of the study, the following suggestions were made: a method of changing to terms suitable to the digital environment based on the current status analysis; preparation of a new estimation system regarding new estimation items; and re-survey of an estimation system of cadastral confirmation survey and preparation of an estimation system.

• Journal of Environmental Impact Assessment
• /
• v.14 no.3
• /
• pp.97-107
• /
• 2005

The purpose of this study is to develop a system, which estimates watershed pollutant loading rate through the combination of GIS and computational mode. Also, the applicability of this study was estimated by the application of the above system for Chuncheon City. The detailed results of these studies are as follows; The pollutant loading estimation system was developed for more convenient estimation of pollutant loading rate in watershed, and the system load was minimized by the separation of estimation module for point and non-point source. This system on the basis of GIS is very economical and efficient because it can be applied to other watershed with the watershed map. System modification is not needed. The pollutant loading estimation system for point source was developed to estimate the pollutant loading rate in watershed through the extraction of the proper data from all districts and yearly data and the execution of spatial analysis which is main function of GIS. From the verification result of spatial analysis, real watershed area and the administrative districtarea extracted by spatial analysis were $1,114,893,340.15m^2$ and $1,114,878,683.68m^2$, respectively. It shows that the spatial analysis results were very exact with only 0.001% error. The pollutant loading estimation system for non-point source was developed to calculate the pollutant loading rate through the overlaying of land-use and watershed map after the construction of new land-use map using the land register database with most exact land use classification. Application result for Chuncheon City shows that the proposed system results in one percent land use error while the statistical method results in five percent. More exact nonpoint source pollutant loading was estimated from this system.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.10
• /
• pp.89-97
• /
• 1997

Because a map consists of many lines, a process of recognizing an object in a map is one to group lines that are consistent with the structure of the object. Therefore, it is important to establish an efficient method for finding lines which constitute objects. In this paper, a novel method for recognizing roads and districts in a land register map is proposed. In this method, lines that constitute objects are searched in a reduced search space by defining some relations between lines, and objects are recognized by using the structural information of the objects. As a result, the search space is reduced effetively, and even objects that embody the broken lines and the crossed lines are recognized.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.4
• /
• pp.55-64
• /
• 2012

This study developed a mobile application system for serving cadastral information needed to propel diverse cadastral works including cadastral resurvey efficiently. First, BlackPoint-Xr was selected as a spatial client engine to embody the cadastral information system based on mobile device including smart phone and tablet PC. The mobile cadastral information system contains functions such as finding location with GPS based on spatial information such as aerial photo, cadastral map, administrative map, and digital map, parcel search with address and lot number, finding land register including land address, the classification of land, and land price. Especially, this study developed functions which can analyze the measurement of distance, area, slope and cross-section elevation of land to apply construction work and land maintenance project. This system can support efficiently cadastral work and construction project by serving diverse cadastral information to users in field and can be also applied to the field of digital cadastral information.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.3
• /
• pp.118-126
• /
• 2008

The purpose of this study is to suggest the way of analyzing land uses to utilize GIS in the field of urban planning. The Busan Land Information System was built in early 2000s. The building data were used by digital map(1:1,000). And building register data in 2001 were utilized as the attribute data. Also, by calculating specialization factor, we distinct the characteristic of every land use of the city, and it compares every land use zone. This study calculated and compared an observation frequency and an expectation frequency of every building use and land use zone. We found that the use of the building tend to be controlled and guided by the land use zone.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7855-7862
• /
• 2015

Cadastral map information is created by registering parcel information such as location, lot number, land category and boundary through the cadastral survey. However, with regard to boundary point coordinate, computerized cadastral information data was registered to either two decimal places (unit in centimeter) or three decimal places (unit in millimeter) so that a confusion in cadastral administration and cadastral survey has been caused. Therefore, the purpose of this study is to look for a method of matching two different coordinate systems through the consideration of registration of cadastral information data and area calculation. In conclusion, the result of the investigation not only shows that areal change and the creation of minute polygons resulted from land alteration could be solved by changing boundary point coordinate from two decimal places to three decimal places, but also suggests that the related laws and regulations to register boundary point coordinate to three decimal places should be institutionally corrected and applied.