• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.18.2-18.2
• /
• 2005

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2006.10a
• /
• pp.132-137
• /
• 2006

With the help of the development of digital-multimedia in the middle of 1990's, FDP(Flat Panel Display) had attracted considerable attention. Collimation proximity exposure system that transfers the pattern on wafer or glass exactly using mask and light with appropriate wavelength is core process in semiconductor and liquid display element. The performances of resolution required in precision exposure system are evaluated by resolving power, depth of focus and storage area. Most of development has targeted on these three factors. The optical design including lamp house has played an important role on the performance of exposure process. In this study, we evaluate the cooling system, concerning on exposure device with mercury lamp among the kernel equipment for the production of LCD, to prevent the instability of lighting due to long term accumulation of excessive heating inside the lamp house. Numerical analysis is conducted on full-scale model. The characteristics of three-dimensional flow, pressure and temperature distribution on exposure system are graphically depicted to estimate the whole cooling system for lamp house and to establish the design criteria.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.3
• /
• pp.1265-1271
• /
• 2014

The lamp cooling system of the exposure has effect on the exposure efficiency and device lifetime. In this paper, we performed the numerical analysis about the thermal flow in the lamp housing of the exposure apparatus for the cooling air inflow rate. We set up the velocity of cooling air of side and bottom as the independent variables because cooling performance of the lamp housing is affected by the velocity of the cooling air side and bottom. The cooling state of lamp housing depend on three dependent variables; the temperature at top mirror and exhaust gas, ellipsoidal mirror. Response surface methodology was used in order to establish the efficient cooling analysis plan. The regression equation predicting the variables temperature of lamp housing according to the cooling air velocity were drawn. The velocity of cooling air to reach the optimum temperature of the lamp housing were derived.

• Journal of Applied Reliability
• /
• v.15 no.3
• /
• pp.163-169
• /
• 2015

In this paper, the evaluating test methods of the fire and the electric shock on the led lamp supply using the house is proposed. We analyzed FMEA in order to analyze the mechanism of the fire and the electric shock of the led lamp supply and designed durability tests on the environment ($85^{\circ}C$, 85% R.H.) and obtained through the two-step QFD and tested. We verified the evaluating test methods of the fire and the electric shock on the led lamp supply using the house through the analysis of the test results.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.300-302
• /
• 2003

Fluorescent lamp converts electrical energy Into light energy. Generally we use both electronic ballast and glow starter method in the house. We developed 40W electronic starter and its characteristic is verified by experiments. The efficiency of ballast is improved by using the LC Parallel reasonance circuit at input stage and LC series reasonance circuit at out-put stage.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.12a
• /
• pp.61-61
• /
• 2020

This experiment was carried out using artificial bed soil and LED in the plastic film house(irradiation time: 07:00-17:00/day). Seedlings(n=63 per 3.3 m²) of ginseng was planted on May 17, 2018. LED was combined with red and blue light in a 3:1 ratio and irradiated with different light intensity(40-160 µmol/m²/s). Average air temperature from April to September according to the light intensity test was 20.4℃-20.9℃. Average artificial bed soil temperature was 20.1℃-21.7℃. The test area where fluorescent lamp was irradiated tended to be somewhat lower than the LED irradiation area. The chemical properties of the test soil was as follows. pH levels was 6.6-6.7, EC levels 0.9-1.3 dS/m and OM levels 30.6-32.0%. The available P₂O₅ contents was 73.3-302.3 mg/kg. Exchangeable cations K and Ca contents were higher than the allowable ranges and mg content was high in the fluorescent lamp treatment. The photometric characteristics of LED light intensity are as follows. The greater the light intensity, the higher the PPFD(Photosynthetic Photon Flux Density) value, illuminance and solar irradiation. Fluorescent lamp treatment had high illuminance value, but PPFD and solar irradiation were lower than LED intensity 40 µmol/m²/s treatment. The photosynthetic rate increased(2.0-3.8 µmolCO²/m²/s) as the amount of light intensity increased, peaking at 120 µmol/m²/s, and then decreasing. The SPAD (chlorophyll content) value decreased as the amount of light intensity increased, and was the highest at 36.1 in fluorescent lamp treatment. Ginseng germination started on April 5 and took 14-17 days to germinate. The overall germination rate was 68.8-73.6%. The growth of aerial parts(plant height etc.) were generally excellent in the treatment of light intensity of 120-160 µmol/m²/s. The plant height was 41.9 cm, stem length was 24.1 cm, leaf length was 9.8 cm and stem diameter was 5.6 mm. The growth of underground part (root length etc.) was the best in the treatment with 120 µmol/m²/s of light intensity. Due to the root length was long(24.8 cm) and diameter of taproot was thick(18.7 mm), the fresh root weight was the heaviest at 24.8 g. There were no disease incidence such as Alternaria blight, Gray mold and Anthracnose. Disease of Damping-off caused by Rhizoctonia solani occurred 0.6-1.5% and incidence ratio of rusty root ginseng was 30.8-62.3%. It is believed that the reason for the high incidence of rusty root ginseng is that the amount of field moisture capacity of artificial bed soil is larger than the soil. Leaf discoloration rate was 13.7-32.3%.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.7
• /
• pp.68-74
• /
• 2007

For carnation productivity improvement, compact-low cost discharge lamp type ozonizer using pulse power source is designed and manufactured. This paper describes the discharge characteristics and the ozone generation characteristics with variation of the output voltage of pulse power source, the quantity of flowing air and the operating number of ozonizer. The important conclusions are as follows. The discharge voltage and current values are proportional to the output voltage of pulse power source. The ozone concentration and generation are proportional to the output voltage of pulse power source and the number of ozonizer. The maximum value of the ozone concentration and generation of the discharge lamp type ozonizer can be obtained 890[ppm] and 59.7[mg/h] respectively. In the carnation productivity house, when the discharge lamp type ozonizer is used the carnation is good quality in the uniformity of the carnation stalk thickness and increased the productivity through improvement of the air and the soil.

• Journal of architectural history
• /
• v.6 no.3 s.13
• /
• pp.129-143
• /
• 1997

The perspective representation and its effect that appeared in the tombs and mural paintings of koguryo are summarized as follows: First, The inside structure of the tombs is likely to show the deepness effect, placing each function in the front and both sides centering around the mane pillars and creating the boundaries and the spaces that have various visibility between the inside and outside spaces of the structure just like a traditional Korean house shows. In addition, The deepness effect is emphasized by suggesting that the spaces are countinued with a storage attached behind the main house or by forming the level and deployment in a narrow space like the scene that a large array is looked out from the main house. Second, The deepness effect is expressed by making the form of ceiling turn to a vertical space of an ascending image, constructing it just as the lotus lamp ceiling of a wooden architecture or drawing it just like the imaginary heavenly world with the sun the moon and mythical fairies and animals spread in it. Thried, The perspective effect is disclosed by drawing the mural pictures in an equally set bird's-eye view without regard to the disfance proportion according to the conceptual visualization which is not a visual penetration, adopting the multiple view points and moving view points that are moving around as an important manner of seeing. Fourth, The deepness effect is emphasized through the scene of changing spaces when they are looked out far or looked into depending on a viewpoint of the daily life by forming the fromes of paintings that we made up with actual pillars, Du Gong, crossbeams or that are painted in most tombs. Fifth, The rich spatial senses are reflected by originating the characters of the three directions, level, deployment and ascending. An example which can support the conclusion of this study can be given here. that is, the construction ground plan of a dwelling house of a nobleman at the end of Koguryo as a remain which was excavated at Dongdae Ja in Jip An.

• Journal of the Korean Home Economics Association
• /
• v.31 no.3
• /
• pp.197-212
• /
• 1993

The purpose of this study was to find out the physical change of the farm house and its anbang(the main room : master bed room), to identify the behavioral changes : activity and awareness of anbang, and to clarify the relationship between the physical changes of the farm house, and the behavioral changes of housing life-style in the anbang space. Bibliographical studies, cultural approaches and field survey method with questionnaire were used to collect data from 55 residents of Anwhari and Yangkyori in Pyong Teck Koon. Tables and drawings were made to analyze the data. The major findings were 1) the heating system of the ondol anbang. The most popular type is the double heating system(new pipes added to the traditional ondol). This combination ondol system brought some conviniences to the farmers. This change in structure of the ondol were of four types : Complete change in style, enlarged-completely changed style, partially changed style, enlarged-partially changed style. 2) from 1960 through 1970 lighting of the anbang changed room oil lamp to electricity. 3) the finishing material of the anbang floor changed from traditional oil paper and straw mats to vinyl flooring. 4) Traditional furniture and small decor items are gradually disappearing and are being replaced by modern items. 5) The awareness and actual use of the ondol anbang has not much changed from the multi-functional and sacred space of daily living : which are the characteristics of Korean traditional ondol anbang. The biggest consistency in the ondol anbang is the heating system of the floor, which is the characteristic of ondol culture in Korea. This system will continue regardless of time and place in Korea.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.2
• /
• pp.184-191
• /
• 1989

The effect of various supplementary light sources on the agronomic characteristics has been investigeted for generation acceleration of barley in green house with the condition of 15$^{\circ}C$ and 8 hrs. day light followed by each supplementary light sources including incandescent electric lamp (IN), Blue fluorescent lamp(BF). day-light fluorescent lamp(DF), Biolux lamp(BL), BL+BF, In+BF and IN+BL. Leaf number of main stem, leaf area, culm length, dry matter yield of shoot, number of grain per spike, grain yield per plant were most sharply decreased with the exposition of IN, while flag-leaf emergence on main stem and I, 000 grain weight were earlist and heavist respectively with the exposition of IN. In appeared to be best light source for shortening the days to heading, but IN + BF will be most desirable light source with considering both days to heading and adequate yield at the same time.