• Progress in Medical Physics
• /
• v.20 no.4
• /
• pp.199-207
• /
• 2009

It is important to initialize Image Plate (IP) completely for removing residual latent image by sodium lamp for reliability and repeatability of computed radiography (CR) system. The purpose of this study was to evaluate latent images of computed radiography (CR) images respect to delay time after erasure of foregone latent image and its effect, and erasure level. Erasure thoroughness for CR acceptance test from American Association of Physicist in Medicine (AAPM) Report 93 (2006) was also evaluated. Measurements were made on a CR (Agfa CR 25; Agfa, BELGIUM) system. Chest postero-anterior (PA), Hand PA, L-spine lateral radiographs were chosen for evaluation. Chest phantom (3D-torso; CIRS, USA) was used for Chest PA and L-spine lateral radiography. For Hand PA radiography, projections was done without phantom. Except Hand PA radiographs, noise was increased with delay time, and ghost image was appeared on overexposed area. Effect of delay after erasure on latent image was not seen on naked eye, but standard deviation (SD) of pixel value on overexposed area was relatively higher than that of other areas. On Hand PA and Chest PA radiographs, noise were not occurred by adjustment of erasure level. On L-spine lateral images at lower erasure level than standard level, noise including ghost image were occurred because of high tube current. Erasure thoroughness of CR system in our department was to be proved by these evaluation. The results of this study could be used as a baseline for IP initialization and reliability of CR images.

• Horticultural Science & Technology
• /
• v.35 no.4
• /
• pp.490-498
• /
• 2017

The in vitro growth of virus-free sweet potato [Ipomoea batatas (L.) Lam.] plantlets was investigated under different light sources: fluorescent lamp (control); red (660 nm), blue (460 nm), white light-emitting diodes (LED), and two mixtures of blue and red LED (R:B = 8:2, and 7:3). Single node explants (10 mm) of three cultivars ('Matnami', 'Shincheonmi', and 'Yeonhwangmi') were cultured on Murashige and Skoog medium supplemented with $0.2mg{\cdot}L^{-1}$ 6-benzyladenine for 4 weeks. Explants were exposed to $150{\pm}5{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ photosynthetic photon flux at a distance of 20 cm, constant temperature of $25^{\circ}C$, and under 16/8-h (day/night) photoperiod. Using the same method, the in vitro growth of 10 cultivars under red LED was also compared. After 3 weeks, vine length was highest in plantlets cultured under red LED, and lowest in plantlets cultured under blue LED. Fresh and dry weights were also greatest in plantlets cultured under red LED. Compared to the control, vine thickness was significantly higher in plantlets grown under white LED and the 7:3 R:B LED mixture. Significant differences were observed among the 10 cultivars grown under red LED. 'Matnami', 'Shincheonmi', and 'Shinhwangmi' all had excellent vine lengths, and fresh and dry weights. Compared to the control, vine elongation of sweet potato plantlets was most effective under red LED, and culture duration was about 1 week shorter.

• Journal of Korea Multimedia Society
• /
• v.14 no.6
• /
• pp.752-758
• /
• 2011

In this paper, we perform a research on a message delivery link based on visible light communication using illumination light-emitting diodes (LEDs) for car-to-car communications and the link transmission success probability is analyzed for the link. The message delivery system is modeled and the signal-to-noise ratio is calculated from the received optical power. Then, the link transmission probability is estimated from the calculated bit error rates (BERs). The message delivery system has optical links from an LED transmitter near the rear lamp of a car ahead to a receiver near the headlamp of a car behind, whose positions are assumed to follow the normal Gaussian distribution. The link transmission success probability is calculated considering the physical characteristics of the optical link. The car positions are generated according to the normal distribution and the bit error rates are calculated for all links. The link transmission success probability is defined. For the unoptimized optical car-to-car message delivery links, it is shown that the link transmission success probability is larger than 0.9 with the transmitted optical power of 400 mW and the semi-angle at half power of 30 degree.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.4
• /
• pp.1-12
• /
• 2008

The aim of this study is to investigate the sensitivity evaluation of human beings in reacting to the correlated color temperature of the optical properties of white LED lighting. For the sake of this study, white light-emitting diode modules have been fabricated their correlated color temperature have been measured, test cabinets for the sensitivity evaluation have been constructed with the white LED modules, and their sensitivity reactions on the test cabinets have been evaluated and analyzed. The sensitivity reaction has been evaluated by the semantic differential method with 15 selected questions, and the reliability and the content validity of their lighting have been analyzed to 3 factors which foe the activity as the first factor, the stability as the second one, the potency as the third one, respectively. For the data analysis on the sensitivity reaction, the dependent variable is the score of the sensitivity evaluation and the independent one is the correlated color temperature of the test module. The results of this study is as follows: In the case of the sensitive evaluation on the activity and the potency in the white LED lighting compared with the fluorescent lamp, the subjects have made higher mark on $MA_3$ with 8,300[K], and in the factor of the stability, they have made higher mark on $MA_1$ with 3,800[K].

• Journal of Korean Society of Forest Science
• /
• v.103 no.2
• /
• pp.203-210
• /
• 2014

The purpose of this study was to investigate the effect of experimental warming using infrared lamps on seed germination and seedling survival rate of Pinus densiflora and Abies holophylla. The air temperature of warmed plots had been automatically maintained 3 higher than control plots. The percent germinations (%) of the two coniferous species were higher in warmed plots than in control plots, however a significant difference appeared only in A. holophylla. In addition, P. densiflora and A. holophylla showed the shorter mean germination time (days), higher germination rate ($seed{\cdot}day^{-1}$) and germination energy (%) in warmed plots than in control plots. A. holophylla showed a higher seedling mortality rate in the warmed plots than in control plots because of increased air and soil temperatures and decreased soil moisture. However, seedling survival rate of P. densiflora showed no significant difference by experimental warming. In the future, changed air and soil temperatures and soil moisture due to global warming will induce a variety of changes in seed germination and survival rate of tree species in nursery culture. Therefore, it is necessary to establish adaptation strategies that improve techniques in nursery culture against global warming.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.18 no.1_2
• /
• pp.27-32
• /
• 2012

There are many possibilities that recycled papers adulterate contaminants during the process. The objective of this research was to evaluate safety of paper-based packaging materials for food, especially commercial pizza boxes in Korea. Ultimately, we compared recycled and non-recycled commercial paper packaging materials. This study was based on Korean Food and Drug Administration (KFDA) regulation. PCBs were measured by GC-ECD. Arsenic and lead were analyzed using an ICP-MS. Formaldehyde was determined by LC-MS. Fluorescent materials were detected by UV lamp. The result of this study shows that non-recycled paper packaging materials meets all the tested hygienic specifications for food packaging materials, whereas recycled paper-based paperboard box may be contaminated by fluorescent whitening agent. Though these results need to be further studied, it is recommended to avoid using recycled paper in direct contact with food when used in food packaging.

• Journal of Mushroom
• /
• v.15 no.4
• /
• pp.259-263
• /
• 2017

In this study, we investigated the morphological characteristics and antioxidant ability of mushroom cultivar Lentinula edodes 'Nongjingo' fruiting bodies after exposure to various light conditions. Color differences between mushrooms treated with mixtures of LED light revealed that mushrooms displayed lighter color shades when compared to the control group (fluorescent light treated mushrooms). Redness increased and yellowness decreased after exposure to all treatments other than the fluorescent control. Measurement of growth characteristics of 'Nongjingo' fruiting bodies showed increases after exposure to all mixed LED treatments. In addition, the uniformity of fruiting bodies was higher when using LED light compared to fluorescent light. The measurement of stem diameters did not show a significant difference between the treatments, however, diameters were slightly larger with exposure to white-green LED. Moreover, stem length was longer in the mixed LED treatments when compared to those exposed to fluorescent light. Examination of the ratio of stem diameter to stem length revealed that the diameter of the stem was greater than the length. The antioxidant activity of water extracts made from Nongjingo fruiting bodies grown under mixed LED conditions was compared to those from mushrooms grown under fluorescence light conditions. The highest antioxidant activity was observed from mushrooms treated with white LED; however, no significant difference was found between mushrooms exposed to white-green LED compared to white-blue LED. The treatment showed higher antioxidant ability than vitamin C. Our results confirm that treatment of white LED and white-blue LED affects the growth and antioxidant ability of Nongjingo mushroom fruiting bodies.

• The Journal of the Korea Contents Association
• /
• v.13 no.12
• /
• pp.19-26
• /
• 2013

In this paper, we present a novel illumination system for parking lots constructed underground. We design and implement this system using microwave sensors and dimming control of LED fluorescent lamps so that we can obtain lighting efficiency of the illumination scheme. We construct an effective illumination system in the aspects of performance and cost, resulting in energy-saving and electricity reduction. Recently conventional energy-saving method applied to old underground parking lots mainly relies upon turning off the half of total number of lamps installed in the parking lot. Sometimes there are some lots that have infrared sensor to be used to turn on/off the fluorescent lamps to realize these operations smoothing. The other schemes utilize timer to control lighting time of the fluorescent lamps. These conventional schemes are forcing to turn off a part of lamps installed so that we cannot apply them in a systematic way. Moreover they will be most inefficient when we leave them alone to be continuous consumers. The lighting control system proposed in this paper can recognize objects through microwave sensors and inform the appropriate lighting time, furthermore we can adjust brightness of LED lamps following the surroundings using dimming control scheme so that we can epochally improve the illumination system for underground parking lots. According to our sophisticated test experiments, we can maximally obtain 81.9% of energy-saving effectiveness using the system proposed in this paper.

• Korean Journal of Environmental Agriculture
• /
• v.12 no.2
• /
• pp.176-183
• /
• 1993

Photolysis experiments were conducted to investigate the stability of a new insecticide, [O,O-Diethyl O-(1-phenyl-3-trifluoromethyl-5-pyrazoyl) thiophosphoric acid ester: KH-502] under the various conditions. In the photolysis experiment, KH-502 was, after being added into the acetone or acetonitrile solution, irradiated under the sunlight or UV lamp $(300{\sim}350nm)$, where acetone or acetonitrile solution was varied with water and $O_2$contents and was treated with humic acid, rosebengal or tryptophan. Results for stability and degradation pattern of KH-502 from the above experiment can be summarized as follows: 1. The significant difference in KH-502 decomposition due to photolysis was shown for between KH-502s irradiated at $300{\sim}350$ nm and non-irradiated. KH-502 was photolyzed in the acetone by the sensitizing effect, but was stable in the acetonitrile. 2. The degradation pattern of KH-502 in the photolysis was different as compared to that in the thermal decomposition, and the decomposed products were O,O-Diethyl O-(1-phenyl-3-trifluoromethyl-5-pyrazoyl)phosphoric acid ester (KH-502 oxo form), O,S-Diethyl O-(1-phenyl-3-trifluoromethyl-5-pyrazoyl)phosphorothiolate(S-ethyl KH-502), 1-Phenyl-3-trifluoromethyl-5-hydroxy pyrazole (PTMHP) and several unknown compounds. 3. Treatments of acetone or acetonitrile solution with humic acid, rosebengal or tryptophan revealed no-sensitizing effect on the photolysis of KH-502. Dissolved oxygen in the acetone played as a cosensitizer with acetone competitively to enhance the photolysis of KH-502. 4. Treatments of acetone with humic acid or paddy soil water collected from fields decreased the photolysis of KH-502.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.2
• /
• pp.16-23
• /
• 2006

This paper presents a novel single-stage high frequency resonant inverter link type DC-DC converter using zero voltage switching with high power-factor. The proposed topology is integrated half-bridge boost rectifier as power factor corrector(PFC) and half-bridge high frequency resonant converter into a single-stage. The input stage of the half-bridge boost rectifier works in discontinuous conduction mode(DCM) with constant duty cycle and variable switching frequency. So that a boost converter makes the line current follow naturally the sinusoidal line voltage waveform. Simulation results have demonstrated the feasibility of the proposed high frequency resonant converter. Characteristics values based on characteristics analysis through circuit analysis is given as basis data in design procedure. Also, experimental results are presented to verify theoretical discussion. This proposed inverter will be able to be practically used as a power supply in various fields as induction heating applications, fluorescent lamp and DC-DC converter etc.