• 한국군사과학기술학회지
• /
• 제10권3호
• /
• pp.120-128
• /
• 2007

In order to reduce the lead-time and cost, the technology of rapid prototyping(RP) has been widely used. This paper describes the methodology to fabricate a large object by using the principle of rapid prototyping. By laminating thick and sloping polystyrene foam plates, we can make the large model which has three dimensional, continuous surfaces faster and easier than conventional processes. Estimated error was much smaller than other RP products which have stepped effect. For accuracy improvement and post processing, machined metal plates are added between the thick plates. To keep the continuity of surface and strengthen the model, pilot holes and guide rods are applied. By the methodology described in this paper, a missile body with flush air intake was fabricated.

• 한국세라믹학회지
• /
• 제40권1호
• /
• pp.87-92
• /
• 2003

출발 물질로 TiCx(x=0.67)와 Al 분말을 사용하여 800~150$0^{\circ}C$ 온도 구간에서 상압 또는 가압 반응으로 Ti$_3$AlC$_2$를 합성하였다. 출발 물질로 TiCx(x=0.67)와 Al 분말을 사용한 반응 합성에서는 Ti-Al intermetallic compound 또는 Al-C compound와 같은 중간 형성물은 형성되지 않았으며 Ti$_3$AlC$_2$을 합성할 수 있었다. TiCx(x=0.67)와 용융 Al의 직접 반응으로 80$0^{\circ}C$에서는 Ti$_2$AlC 상이 합성되었으며, 1200~150$0^{\circ}C$ 반응온도 구간에서는 Ti$_3$AlC$_2$ 상이 우선적으로 합성되었다. 저온에서 합성된 Ti$_2$AlC 상은 고온에서 TiC와 반응으로 Ti$_3$AlC$_2$ 상으로 합성되었다. 본 연구에서는 출발 물질로 TiCx와 Al을 사용한 Ti$_3$AlC$_2$ 상의 합성기구를 제시하였다. 합성된 Ti$_3$AlC$_2$의 미세구조는 Ti$_3$AlC$_2$ 상으로 이루어진 결정립이 45~120nm크기로 적층된 구조를 갖는다.

• Journal of Korean Vacuum Science & Technology
• /
• 제4권4호
• /
• pp.93-96
• /
• 2000

Microchannel plates (MCPs) have been developed by introducing new materials and process technologies. Main body was made of alumina by programmable punching, laminating, and firing. The channel walls of pore arrays of an MCP were deposited with thin films by electroless copper plating and sol-gel process. Our MCP has advantages such as easy fabrication, durability, high temperature endurance, and applicability to the large size comparing with the conventional MCPs. Experiments on the brightness of an MCP incorporated FED revealed that the FED with a MCP is three to four times brighter than a conventional FED. Moreover, the focusing in a FED is improved. Incorporating an MCP into a FED is one of promising methods to enhance the characteristics of the FED. In addition, amplification yield of the MCP is measured for varying the aspect ratio and the input current.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.84.1-84.1
• /
• 2010

Currently, new and renewable energy come into the spotlight, such as solar energy, wind power, fuel cell, hybrid car etc., due to the energy resource is being depleted. Especially, in order to solve like this problem, the study of solar cell manufacturing systems are being extensively researched such as vacuum process. But the major fault of the vacuum process are its expensive production price. On the order hand, Roll-to-roll printing system, the new technology of solar cell manufacturing, has low production price compare with the vacuum process. Also roll-to-roll printing system can decrease the 95% of waste water and 99.9% of harmful gasses than the vacuum process. So we addressed the roll to roll printing system for the flexible solar cell by using printing technology. This roll-to-roll printing system is comprised of various modules, such as web handling module, fine pattern printing module, dry/curing module, uniform coating module and laminating module etc.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.117-117
• /
• 2009

Recently, low temperature co-fired ceramic (LTCC) technology has gained a remarkable application potential in sensors, actuators and microsystems fields. In this study, we investigated the effects of annealing treatment on the electrical properties of $Pb(ZrTi)O_3$ (PZT) thin films deposited on LTCC substrate. The LTCC substrates with thickness of 400 ${\mu}m$ were fabricated by laminating 12 green tapes which consist of alumina and glass particle in an organic binder. The PZT thin films were deposited on Au/LTCC substrates by RF magnetron sputtering method. Then, the change of the crystallization of the films was investigated under various annealing temperatures. The results showed that the crystallization of the films were enhanced as increasing annealing temperatures. The film, annealed at $700^{\circ}C$, 3min, was well crystallized in the ferovskite structure. The structural variation of the films were analyzed by using X-Ray diffraction (XRD) and field emmision scanning electron microscopy (FESEM).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.118-118
• /
• 2009

Low temperature co-fired ceramic (LTCC) is one of promising materials for MEMS structures because it has very good electrical and mechanical properties as well as possibility of making various three dimensional (3D) structures. In this work, piezoelectric pressure sensors based on hybrid LTCC technology were presented. The LTCC diaphragms with thickness of 400 um were fabricated by laminating 12 green tapes which consist of alumina and glass particle in an organic binder. The piezoelectric sensing layer consists of $Pb(ZrTi)O_3$ (PZT) thin film deposited by RF magnetron sputtering method on between top and bottom Au electrodes. The results showed that the fabrication method is very suitable for pressure sensor applications. The PZT films deposited on LTCC diaphragms were successfully grown and were analyzed by using X-ray diffraction method (XRD) and field emission scanning electron microscope (FESEM).

• 전기학회논문지
• /
• 제67권3호
• /
• pp.448-453
• /
• 2018

PV module protective film plays an important role in protecting the solar cell from external environment by anti-hydrolysis polyester, UV resistance and mechanical properties. The backsheet was manufactured by using Roll-to-Roll dry laminating process. The backsheet structure is composed of 3 layers, which are PE, PET, and Fluorine polymer films. In this study, we have experimented the variation of thermal conductivities depending on MgO inputs 10% to 25% in order to confirm the dependence of the module efficiencies. High thermal conductive backsheet can increase the module output power efficiency because the heat is dissipated by spreading out the internal heat. Long-term environment weatherability tests were conducted for confirming 25 year reliability in the field such as PCT, UV, and power efficiency degradations. As the evaluation result, high thermal conductivity can be effective for increase of power efficiency of solar panel by using thermal conductive MgO masterbatch.

• KSBB Journal
• /
• 제30권6호
• /
• pp.268-274
• /
• 2015

3D printing technology has been used in various fields such as materials science, manufacturing, education, and medical field. A number of research are underway to improve the 3D printing technology. Recently, the use of 3D printing technology for fabricating an artificial tissue, organ and bone through the laminating of cell and biocompatible material has been introduced and this could make the conformity with the desired shape or pattern for producing human entire organs for transplantation. This special printing technique is known as "3D Bio-Printing", which has potential in biomedical application including patient-customized organ out-put. In this paper, we describe the current 3D bio-printing technology, and bio-materials used in it and present it's practical applications.

• Journal of the Korean Wood Science and Technology
• /
• 제16권3호
• /
• pp.22-37
• /
• 1988

In tendancy of manufacturing beam with laminating particleboard, it was thought that if the properties, especially mechanical properties, of particleboard be reinforced, the mechanical properties of particleboard-laminated beam would be also improved. So in this study the particleboard was reinforced with composing of wood particle and steel wire. This study was carried out to obtain the basic physical and mechanical properties of board composed of wood particle and steel wire, especially tensile strength and compressive strength which are the important factors of the lamina of beam, in order to estimate whether the board, composed of wood particle and steel wire could be to improve the properties of the particleboard- laminated beam. The results obtained were summarized as follows: 1. The board composed of wood particle and steel wire in accordance with lower board density took better thickness swelling. 2. The board with lower board density was improved in higher value of tensile strength with more steel wires in prescribed cross section area of the board. for example, the board of density 0.5 showing 140% improved value. 3. In compressive strength, the board with lower board density was also improved in hjgher value with more steel wires in prescribed cross section area.

• 한국전기전자재료학회논문지
• /
• 제21권6호
• /
• pp.499-502
• /
• 2008

In this work, Ga-doped ZnO (GZO) thin films for gas sensor application were deposited on low temperature co-fired ceramics (LTCC) substrates, by RF magnetron sputtering method. The LTCC substrate is one of promising materials for this application since it has many advantages (e.g., low cost production, high manufacturing yields and easy realizing 3D structure etc.). The LTCC substrates with thickness of $400\;{\mu}m$ were fabricated by laminating 12 green tapes which consist of alumina and glass particle in an organic binder. The structural properties of the fabricated GZO thin film with thickness of 50 nm is analyzed by X-ray diffraction method (XRD) and field emission scanning electron microscope (FESEM). The film shows good adhesion to the substrate. The GZO gas sensors are tested by gas measurement system and show fast response and recovery characteristics to $NO_x$ gas that is 27.2 and 27.9 sec, recpectively.