• Preventive Nutrition and Food Science
• /
• v.1 no.1
• /
• pp.16-22
• /
• 1996

Amino acids and ribonucleotides were measured for boiled-dried anchovy to determine the effect of 5 kGy γ-irradiation on its quality stability during storage at ambient and cooling (5∼10℃) temperatures for 12 months in a laminated-film package(Polyethylene 10㎛). The anchovy samples contained about 55%(d.b) of total amino acids and about 1%(d.b) of free amino acids. Although there found a significant change(p<0.01) in the content of leucine and lysine immediately sfter irradiation, the overall content of toral amino acids was little changed in stored anchovy even six months after irradiation at cooling conditions. γ-Irradiation caused a significant reduction(p<0.01) in the total content of free amino acids, showing a similar tendency by storage conditions. However, the ribonucleotides. which were 12.00mg/g(d.b) in inosine-5'-monophosphate and 0.38mg/g(d.b) in guanosine-5'-monophospate, were resistant to 5kGy-irradiation. With the lapse of storage time, it was also shown that storage temperature was more influential than irradiation on the contents of amino acids and taste compounds of dried anchovy.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.247-248
• /
• 2022

3D printer-based self-healing capsules have been proposed to heal cracks by enabling various structural designs, repeatable fabrication, and strength analysis of the capsules. The Fusion Deposition Modeling (FDM) method was used to design, analyze, and produce new self-healing capsules that are widely used at low cost. However, PLA extruded from FDM has low interlayer adhesion energy, and thus strength varies depending on the angle of load applied to the laminated layer and the concrete structure, thereby degrading the performance of the self-healing capsule. Therefore, in this paper, the structure of the capsule manufactured by the FDM PLA method has isotropic strength was designed. In addition, the fracture strength in the x, y, and z directions of the load applied through the compression test was analyzed. As a result, it was confirmed that the newly proposed capsule design has an isotropic fracture strength of 1400% in all directions compared to the existing spherical thin-film capsule.

• Science of Emotion and Sensibility
• /
• v.15 no.2
• /
• pp.201-208
• /
• 2012

The objectives of this study were to investigate the psychoacoustic properties of PTFE(Poly tetra Fluoroethylene) laminated vapor permeable water repellent fabrics which are frequently used for sportswear, to examine the relationship among fabrics' basic characteristics, mechanical properties and the psychoacoustic properties, and finally to propose the predicting model to minimize the psychoacoustic fabric sound. A total of 8 specimens' frictional sound were recorded and Zwicker's psychoacoustic parameters such as loudness(Z), sharpness(Z), roughness(Z), and fluctuation strength(Z) were calculated using the Sound Quality Program. Mechanical properties of specimens were measured by KES-FB system. Loudness(Z) of specimen D-1 was the highest, which means the rustling sound of the specimen D-1 was the most noisy. Statistically significant difference among film type was observed only in loudness(Z) for fabric sound. Based on ANOVA and post-hoc test, specimens were classified into less loud PTFE film group (groupI) and loud PTFE film group (groupII). Loudness(Z) was higher when staple yarn was used compared when filament yarn was used. According to the correlation between the mechanical properties of fabrics and loudness(Z) in groupI, the shear properties, compression properties and weight showed positive correlation with loudness(Z). According to the regression equation predicting loudness(Z) of groupI, the layer variable was chosen. In groupII, variables explaining the loudness(Z) were yarn types and shear hysteresis(2HG5).

• Polymer(Korea)
• /
• v.36 no.3
• /
• pp.344-350
• /
• 2012

New pressure sensitive adhesives (PSAs) for polarizer film were prepared by electron beam (e-beam) radiation to acrylic copolymers, and their adhesive properties were investigated. The acrylic copolymers were synthesized by free radical polymerization of $n$-butylacrylate (BA), 2-hydroxyethyl methacrylate (HEMA), and acrylic acid (AA). The acrylic copolymers were coated on PET release films to a thickness of 25 ${\mu}m$, laminated to polarizer films, and then radiated with e-beam at room temperature. Gel fractions of all the acrylic copolymers after e-beam radiation at 50 kGy were higher than 93%, and their crosslinking densities were increased with increasing the content of HEMA units. PSA prepared by e-beam radiation of acrylic copolymer synthesized with a feed ratio of BA/HEMA/AA = 89.5/10/0.5 (w/w/w) at a dose of 50 kGy exhibited the best adhesion performances in terms of peel strength, creep resistance, durability and reliability, and light leakage. It is expected that the preparation method of PSAs via e-beam irradiation will improve the producibility and workability of polarizer film for liquid crystal display.

• Composites Research
• /
• v.32 no.6
• /
• pp.395-402
• /
• 2019

The RFI process is an OoA process that fiber mats and resin films are laminated and cured in a vacuum bag. In case that resin film is insufficient to fill empty space in fibers, it makes void defect in composites and this void decrease mechanical properties of the composites. For this reason, non-destructive testing is usually used to evaluate void of manufactured composites. So, in this study, a manufacturing method of standard void specimens, which are able to be used as references in non-destructive testing, was proposed by controlling resin film thickness in the RFI process. Also, a fiber compaction test was proposed as a method to set the resin film thicknesses depending on target voids of manufacturing panels. The target void panels of 0%, 2%, and 4% were made by the proposed methods, and signal attenuation depending on void was measured by non-destructive testing and image analysis. In addition, voids of specimens for tensile, in-plane, short beam and compressive tests were estimated by signal attenuation, and mechanical properties were evaluated depending on the voids.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.3
• /
• pp.77-82
• /
• 2012

In this paper, the research of IC embedded PCB process is carried out. For embedding chips into PCB, solder-balls on chips were etched out and ABF(Ajinomoto Build-ip Film), prepreg and Cu foil was laminated on that to fabricate 6 layer build-up board. The chip of which solder ball was removed was successfully interconnected with PCB by laser drilling and Cu plating. However, de-lamination phenomenon occurred between chip surface and ABF during reflow and thermal shock. To solve this problem, de-smear and plasma treatment was applied to PI(polyimide) passivation layer on chip surface to improve the surface roughness. The properties of chip surface(PI) was investigated in terms of AFM(Atomic Force Micrometer), SEM and XPS (X-ray Photoelectron Spectroscopy). As results, nano-size anchor was evenly formed on PI surface when plasma treatment was combined with de-smear(NaOH+KMnO4) process and it improved thermal shock reliability ($260^{\circ}C$-10sec solder floating).

• Korean Journal of Food Science and Technology
• /
• v.20 no.1
• /
• pp.1-5
• /
• 1988

Changes in the quality characteristics of three sizes of boiled-dried anchovies packaged in kraft paper laminated with 0.03 mm PE film during storage for six months at $5^{\circ}C$ were studied. In case of Dae-myul (78-80mm), the reaction of thiobarbituric acid, browning rate of lipid oxidation and Hunter-Scale color values. L, a, and b, were higher than those in Joong-myul (45-49 mm) or So-myul (30-34 mm). Organoleptic evaluation suggests that boiled-dried anchovy be good in sequence as So-myul, Joong-myul and Dae-myul. Shelf life of Dae-myul was half times lower than that of Joong-myul or So-myul. Regression equation for the sensory score prediction with lipid oxidative browning was determined.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.4
• /
• pp.627-631
• /
• 1996

The antioxidative effects of BHT and rosemary on the hydrolysate from skipjack processing byproduct(SPB) was evaluated by storing at $30^{\circ}C$ for 60 days. Each of 0.02% BHT, 0.01% rosemary, and 0.02% rosemary was added into SPB hydrolysate prior to spray drying and the dried powder was tightly sealed in the laminated film(PET/Al foil/CPP, $5\mu\textrm{m}/15\mu\textrm{m}/70\mu\textrm{m})$ bags for storage. The colometric lightness("L") decreased through the storage period in all treatments while the redness ("a") showed the opposite trend. Changes of pigment were higher in level of hydrophillic brown than in lipophilic brown during storage. The effect of antioxidants, by adding BHT and rosemary, showed in TBA and POV during storage. Especially, the 0.02% rosemary treatment was more effective than 0.02% BHT treated SPB having effect of angiotensin converting enzyme(ACE) inhibiting.yme(ACE) inhibiting.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.12
• /
• pp.1133-1138
• /
• 2005

In this study, we have prepared, as the pluse power source, a commercially supplied Li-ion battery with a capacity of 700 mAh and AC resistivity of 60 md at 1 kHz and nonaqeous asymmetric hybrid capacitor composed of an activated carbon cathode and MCMB anode, and have examined the electrochemical characteristics of hybrid capacitor and the pulse performances of parallel connected hybrid capacitor/Li-ion battery source. The nonaqueous asymmetric hybrid capacitors constituted with each stack number of pairs composed of the cathode, the porous separator and the anode electrode were housed in Al-laminated film cell. The 10 stacked hybrid capacitor, which was charged and discharged at a constant current at 0.25 $mA/cm^2$ between 3 and 4.3 V, has exhibited the capacitance of 108F and the lowest equivalent series resistance was 32 $m{\Omega}$ at 1 kHz. On the other hand, the enhanced run time of Li-ion battery assisted by the hybrid capacitor was obtained with increasing of current density and pulse width in Pulse mode. The best improvement, $84\;\%$ for hybrid capacitor/Li-ion battery was obtained in the condition of a 7C-rate pulse (100 msec)/0.5C-rate standby/$10\;\%$ duty cycle.

• Journal of Life Science
• /
• v.12 no.5
• /
• pp.535-543
• /
• 2002

To investigate the possibility of processing semi-dried jellyfish and to examine its keeping quality, the factors such as moisture content, pH, volatile basic nitrogen (VBN), viable cell counts, color value and texture were analyzed. For processing of the semi-dried product, optimum conditions of drying temperature and drying time were $25^{\circ}C$ and 90min, respectively, under 60 $\pm$ 5% of relative humidity and 2 m/sec of air blast speed. The shelf-life of the products, vacuum-packing method in nylon/polyethylene/linear low density polyethylene (0.015/0.045/0.040 mm) laminated film bag was at least 6 weeks during storage at 4$^{\circ}C$, while that of air packaged one was at least 4 weeks. In case of 2$0^{\circ}C$ storage the shelf-life of the products was at least 3 weeks in both air and vacuum packaged ones.