• 한국세라믹학회지
• /
• 제45권12호
• /
• pp.782-787
• /
• 2008

Ni-ceria cermets have been extensively investigated as candidates for the anode in intermediate-temperature solid oxide fuel cells. We have used the citric method to synthesize nanocomposite powders consisting of NiO (Ni metal content: $40{\sim}60%$ by volume) highly dispersed in $Ce_{0.9}Gd_{0.1}O_{1.95}$ (CGO). The microstructure characteristics and sintering behaviors of the nanocomposites were investigated. No impurity phases were observed and the shrinkage of these substrates matched well with that of a CGO electrolyte with a specific surface area of $11\;m^2/g$. Densification of the CGO electrolyte layer to $<5\;{\mu}m$ thickness was achieved by co-firing the laminated electrolyte with the porous NiO-CGO substrate at $1400^{\circ}C$ for 6 h.

• 한국식품영양과학회지
• /
• 제25권3호
• /
• pp.484-490
• /
• 1996

Physicochemical changes were determined for the boiled-dried anchovies packaged in a laminated film(nylon 15${\mu}{\textrm}{m}$/polyethylene 100${\mu}{\textrm}{m}$) and stored for one year at ambient and cooling(5~1$0^{\circ}C$) temperatures after gamma irradiation. Lipophilic and hydrophilic browning pigments increased with storage time particularly at ambient temperature, even though initial 5 kGy irradiation did not affect the formation of pigments significantly. This results were confirmed by the instrumental color determinations, Hunter color L, a, b and ΔE. With respect to changes in relative fatty acid compositions, storage period and temperature were more influential factors than gamma irradiation. Irradiation at 5 kGy induced insignificant changes in the total flavor profiles of stored anchovies, which were mainly composed of n-dodecanal(26.7%), n-pentadecane(22.2%), n-octanal(4.9%) and 2-pentylfuran(3.4%).

• 한국전기전자재료학회논문지
• /
• 제21권4호
• /
• pp.341-347
• /
• 2008

Laminated LTCC components of high integrity, fabricated by thick film process, are applied to industrial field of IT technology along with miniaturization trend of electronic devices. Dispersion states were examined by several evaluation methods with MLS-22, which is one of commercial LTCC powders, to achieve optimal dispersion as basis for stable LTCC fabrication process. Slurry viscosity, surface roughness of dip-coated slide glass, sedimentaion of slurry, and SEM observation of dried surface were utilized with respective amount change of various commercial dispersants. Among these commercial dispersants, optimal dispersion state was obtained with 0.4 wt% of BYK-111, from the results of various evaluation methods.

• 생명과학회지
• /
• 제10권1호
• /
• pp.61-67
• /
• 2000

An experiment was conducted for extension of shelf-life of cooked squid (Todarodes pacificus) using modified atmosphere packaging. The products were packed in a Ny/PE/LLDPE (0.015/0.045/0.040 mm) laminated film with air, vacuum, CO2 gas, and N2 gas, respectively, and then stored at 5$^{\circ}C$ and 2$0^{\circ}C$. Keeping qualities of the products were investigated by measuring moisture content, H, volatile basic nitrogen (VBN), viable cell count, thiobarbituric acid (TBA) value, peroxide value (POV) and color value. Good qualities of the products stored at 5$^{\circ}C$were maintained at least 9 days, 11 days, more than 35 days and 24 days in air, vacuum, CO2 gas and N2 gas packaging products, respectively. In cases of 2$0^{\circ}C$ storage, however, the shelf-lives of all the products were only one day. The shelf-life extension of the products were observed in CO2 ga>N2 gas>vacuum>air packaging in order.

• 한국전기전자재료학회논문지
• /
• 제29권10호
• /
• pp.601-607
• /
• 2016

Piezoelectric thick films of soft $Pb(Zr,Ti)O_3$ (PZT) based commercial material (S55) were fabricated using a conventional tape casting method. Ag-Pd electrodes were printed on the piezoelectric film at room temperature and all 5 layered films with a dimension of $12mm{\times}16mm$ were successfully laminated for a multi-layered piezoelectric ceramic actuator. The laminated specimens were co-fired at $1,100^{\circ}C$ for 1 h. A flat layered and dense microstructure was obtained for the $112{\mu}m$ thick piezoelectric actuator after sintering process. Thereafter, a prototype piezoelectric speaker was fabricated using the multi-layered piezoelectric ceramic actuator which can operate as a bimorph. Its SPL (sound pressure level) characteristic was also evaluated for speaker application. Frequency response revealed that the output SPL with a root mean square voltage of 10 V increased gradually to the highest peak of 87.5 dB for 1.5 kHz and exhibited a relatively stable behavior over the measured frequency range (${\leq}20kHz$) at a distance of 10 cm, implying that the fabricated piezoelectric speaker is potential for speaker applications.

• Journal of Magnetics
• /
• 제12권3호
• /
• pp.118-123
• /
• 2007

We have studied the effect of Au-Cu back layer system ${\sim}10{\AA}$ thick on the properties of a spin valve. The back layers were Cu, Au, co-sputtered $Cu_xAu_{1-x}$, laminated $[Au/Cu]_n$. and bi-layer [Au/Cu]. When Au was added to the Cu, the resistance of the spin valve abruptly increased most likely due to impurity scattering. The GMR values were not increased significantly for all the structures. In the case of co-sputtered $Cu_xAu_{1-x}$, the changes in the resistance, ${\Delta}R$, was increased at a composition of ${\sim}Au_{0.5}Cu_{0.5}$. This increase in ${\Delta}R$ is due to increase in the resistance and not from the enhanced spin-dependent scattering. The structural analyses showed that the orthorhombic $Au_{0.5}Cu_{0.5}$ was formed in the back layer instead of the face-centered tetragonal $Au_{0.5}Cu_{0.5}$ as we expected. Thermal annealing over $400^{\circ}C$ may be required to have face-centered tetragonal in the $10{\AA}$ thick ultra-thin film. In the case of a laminated or bi-layered back layer, the properties of the spin valve were improved, which may be attributed to the increase in the mean free path of conduction electrons.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.620-621
• /
• 2008

Transparent electronics has been one of the key terminologies forecasting the ubiquitous technology era. Several researchers have thus extensively developed transparent oxide-based thin-film transistors (TFTs) on glass and plastic substrates although in general high voltage operating devices have been mainly studied considering transparent display drivers. However, low voltage operating oxide TFTs with transparent electrodes are very necessary if we are aiming at logic circuit applications, for which transparent complementary or one-type channel inverters are required. The most effective and low power consuming inverter should be a form of complementary p-channel and n-channel transistors but real application of those complementary TFT inverters also requires electrical- and even photo-stabilities. Since p-type oxide TFTs have not been developed yet, we previously adopted organic pentacene TFTs for the p-channel while ZnO TFTs were chosen for n-channel on sputter-deposited $AlO_x$ film. As a result, decent inverting behavior was achieved but some electrical gate instability was unavoidable at the ZnO/$AlO_x$ channel interface. Here, considering such gate instability issues we have designed a unique transparent complementary TFT (CTFTs) inverter structure with top n-ZnO channel and bottom p-pentacene channel based on 12 nm-thin nano-oxide/self assembled monolayer laminated dielectric, which has a large dielectric strength comparable to that of thin film amorphous $Al_2O_3$. Our transparent CTFT inverter well operate under 3 V, demonstrating a maximum voltage gain of ~20, good electrical and even photoelectric stabilities. The device transmittance was over 60 % and this type of transparent inverter has never been reported, to the best of our limited knowledge.

• 한국포장학회지
• /
• 제8권1호
• /
• pp.15-22
• /
• 2002

PET $16{\mu}m/dry$ lamination/Al-foil $7{\mu}m/dry$ lamination/CPP $80{\mu}m$의 사양으로 2개 업체에서 제조된 포장용 복합필름에서 제품 충전공정 중에서 발생한 열접착 트러블의 원인을 규명하고자 복합필름을 분리하여 각각의 두께와 재질이 제시된 사양과 일치하는지를 관능검사와 IR, DSC로 측정한 결과 1개 업체의 것이 차단층의 두께가 다르고 열접착층 필름의 재질은 비슷한 것임을 알았고, 시험기로 찾은 최적 열접착조건은 $195^{\circ}C$와 $210^{\circ}C$로 $15^{\circ}C$의 차이를 보였으며 이를 종형 4면 액체충전포장기로 직접 충전 포장하였을 때의 봉지의 열접착 강도를 비교한 결과 최적 열접착 조건 $195^{\circ}C$의 것은 평균 $4.76kg/cm^2/15mm,\;210^{\circ}C$의 것은 평균 $3.84kg/cm^2/15mm$이었다.

• 한국전기전자재료학회논문지
• /
• 제28권12호
• /
• pp.792-796
• /
• 2015

With high integration of electronic components, power inductors are also miniaturized. Recently, thick film processes for small size power inductors were developed and commercialized. However, the thick film process to prepare soft magnetic green sheets was not reported enough. In this study, we used Fe-Si magnetic and CIP (carbonyl iron powders) as starting materials to lead to a bimodal particle size distribution in the sheet. We proposed a newly developed 'Modified slurry preparation process' to get well dispersed condition even at high solid contents. Using the new process, it was possible to prepare a well dispersed slurry over 70 vol% of solid. BYK-103 was better than BYK-111 as dispersant in this slurry and the optimum amount was 0.6 wt%. The optimized slurry was formed into a sheet by tape casting process and then the sheet was laminated. We conformed that small size powder, large size powder, and epoxy resin were well dispersed in the green sheet.

• 한국식품영양과학회지
• /
• 제29권1호
• /
• pp.80-84
• /
• 2000

기능성 필름을 코팅한 골판지 상자에 사과를 저장하면서 품질유지 상태를 조사하고자 대조구로 기존에 유통 중인 골판지 상자와 두께 0.03, 0.05 mm의 LDPE필름(30LD와 50LD)과, 두께 0.03 mm, 0.05 mm의 기능성MA 필름을 골판지 상자에 코팅한(30CE와 50CE) 후 이 상자에 후지사과를 15 kg씩 포장하여 $5^{\circ}C$에 75일간 저장하면서 신선도 변화를 비교 연구하였다. 중량 감소는 저장 75일 후 대조구는 2.7%, LD와 CE 포장구들은 0.2~0.5% 감소했다. 경도는 대조구보다는 필름포장구들에서 변화가 적었고 LD보다는 CE 포장구에서 변화가 더 적게 나타났다. 비타민 C 함량은 초기의 3.67 mg%에서 대조구는 42%, LD 포장구들은 31~29%, CE 포장구들은 24~22%가 감소하였다. 산도 및 가용성 고형분의 경우 대조구가 필름포장구들에서 변화가 심했으며, 필름포장구들 중에서는 LD 포장구보다 CE 포장구에서 변화가 적게 나타났으며, 부패도 대조구보다는 LD와 CE 포장구에서 적게 나타났다.