• Structural Engineering and Mechanics
• /
• 제70권2호
• /
• pp.233-243
• /
• 2019

This paper depicts the development and characterizations of laminated composites made with cellulosic giant cane (Arundinaria gigantea) fiber mats and epoxy resin. Zirconia-toughened mullite (ZTM) is used as a filler material in the laminated composite which was prepared from sillimanite through plasma processing technique. The mechanical characterizations of this composite have been carried out as per ASTM standards to evaluate its usability as a structural material. The effects of varying weight percentages of the filler and two different fiber orientations namely, angle-ply [$+45^{\circ}/-45^{\circ}/+45^{\circ}$] and balanced cross-ply [$0^{\circ}/90^{\circ}/0^{\circ}$] on the physical and mechanical properties such as density, microhardness, impact strength, tensile strength and interlaminar shear strength of the layered composite specimens have been investigated. The study indicates that the inclusion of zirconia-toughened mullite in the composite laminate as filler improves its mechanical properties. Moreover, the use of giant cane fiber mat in the laminate is more eco-friendly than the synthetic fibers. This research also helps in generating additional data to enrich the repository of natural fiber reinforced laminated composites.

• Composites Research
• /
• 제36권1호
• /
• pp.42-47
• /
• 2023

In this paper, we present a fatigue life prediction methodology using multiple S-N curves according to the different stress states of laminated composites. The stress states of the plies of the laminated composites are classified into five modes: longitudinal tension or compression and transverse tension or compression, and shear according to the maximum stress criterion and Puck's criterion with a scaling factor K. This methodology has advantages in computational cost, and it can also consider microstructural characteristics of the composites by applying different S-N curves. The S-N curves for the fatigue analysis are obtained by experimental fatigue test. The proposed methodol is implemented into commercial software, ABAQUS user material subroutine and therefore, the fatigue analysis is conducted using the structural analysis results. The finite element (FE) simulation results are presented for unidirectional composites with and without open-hole. The FE simulation results show that the stress condition is different depending on the fiber orientation of the unidirectional composite, so the fatigue life is calculated with different S-N curves.

• 한국공간구조학회논문집
• /
• 제10권4호
• /
• pp.75-83
• /
• 2010

복합적층판은 다른 금속재료에 비해 높은 비강도, 비강성 등의 우수한 역학적 특성을 지니므로, 최근 다양한 분야에서 사용하고 있다. 그러나 이러한 복합적층판은 충격에 약하다는 단점이 있다. 그리하여 복합적층판의 충격거동에 대한 많은 연구가 이루어지고 있다. 충격거동을 조사하기 위해서는 우선 충격체와 복합적층판사이의 접촉력을 계산하여야 한다. 접촉력을 알기 위해서는 운동방정식, 복합적층판의 운동방정식 그리고 압입량에 관한 관계식을 동시에 풀어야 한다. 본 연구에서는 고전적인 헤르츠식, 썬식, 썬&양식 그리고 썬&탄식을 포함한 유한요소프로그램을 이용하여 복합적층판의 저속충격거동을 조사한다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.264-267
• /
• 2005

Impact damages are very important in the perspective of residual strength of composite structures such as aircrafts, ships, and trains because those damages are sometimes not visible on the surface of the point of impact and the impact resistance of laminated composites is usually not so high. Thus, the impact characteristics of laminated composites should he investigated for the safety of composite structures. This paper investigates the low-velocity impact and damage detection conducted on woven carbon/epoxy laminates. Experimental results show that the type of damage is dependent on the impact energy level and the delamination area becomes larger as the impact energy increases.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 1999년도 추계학술발표대회 논문집
• /
• pp.223-226
• /
• 1999

This paper presents the theoretical analysis method to determine the stress concentrations around the circular cutouts with various geometrical parameters. The purposes of this study are to investigate on the stress distribution around the circular cutouts due to interaction between two circular cutouts and to develop the design method in composite plates. The composite laminated plate with 2 equal collinear circular cutouts under inplane loads is treated as an quasi-isotropic, symmetric, finite, square, multiply connected and thin plate. The effects of cutout sizes, distances between two circular cutouts and inplane load conditions on stress distribution are studied in detail.

• Composites Research
• /
• 제17권1호
• /
• pp.18-28
• /
• 2004

섬유강화 적층 복합재 차체 구조물의 강도를 평가하기 위해 전체 적층판 접근방법의 적용을 제시하였다. 180km/h급의 한국형 틸팅열차의 하이브리드 복합재 자체 기본설계를 검증하기 위해서 구조해석을 수행하였으며 또한 복합재 적층판의 강도를 구하기 위해 기계적 물성시험을 수행하였다. 결과적으로, 한국형 틸팅열차의 복합재 자체 구조물에서 발생하는 응력값들은 모두 파손영역의 안전한 범위 내에 존재하였으며 전체 적층판 접근방법은 초기 기본석계 단계에서 하이브리드 복합재 자체 구조물의 파손을 예측하는데 매우 유용함을 증명하였다.

• 대한기계학회논문집
• /
• 제18권4호
• /
• pp.887-902
• /
• 1994

Within the framework of anisotropic thermoelasticity, the problem of an interlaminar crack in a laminated fiber-reinforced composite subjected to a uniform heat flow is investigated. Under a state of generalized plane deformation, dissimilar anisotropic half-spaces with different fiber orientations are considered to be bound together by a matrix interlayer containing the crack. The interlayer models the matrix-rich interlaminar region of the fibrous composite laminate. Based on the flexibility/stiffness matrix approach, formulation of the current crack problem results in having to solve two sets of singular integral equations for temperature and thermal stress analyses. Numerical results are obtained, illustrating the parametric effects of laminate stacking sequence, relative crack size, crack location, crack surface partial insulation, and fiber volume fraction on the values of mixed mode thermal stress intensity factors.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1999년도 가을 학술발표회 논문집
• /
• pp.309-316
• /
• 1999

Laminated composite plates are very useful in various fields of engineering where high strength-to-weight and stiffness-to-weight ratios are required. Design optimization of composite structures has gained importance in recent years as the engineering applications of fiber reinforced materials have increased and weight savings has become an essential design objective. However, due to the anisotropic material properties of laminated composite structure it is very difficult to analyze and design. In this study, numerical optimization technique together with the finite element method is used to find the optimum design of FRP. Various combination of fiber orientation for the laminate layers are investigated and several local optimum solutions are found.

• Composite Materials and Engineering
• /
• 제3권3호
• /
• pp.179-199
• /
• 2021

A simple solution for free vibration of cross-ply and angle-ply laminated composite plates in a thermal environment is investigated using a basic trigonometric shear deformation theory. By application of trigonometric four variable plate theory, the transverse displacement is subdivided into bending and shear components, the present theory's number of unknowns and governing equations is reduced, making it easier to use. Hamilton's Principle is extended to derive the equations of motion of the plates using Navier's double trigonometric series, a closed-form solution is obtained; the primary conclusion is that simple solution is obtained with good results accuracy when compared with previously published results, and the natural frequency will differ depending on, environment temperature, thickness ratio, and lamination angle, as well as the aspect ratio of the plate.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 춘계학술발표대회 논문집
• /
• pp.224-227
• /
• 2001

Adaptive analysis of multilayered composite and sandwich plates is carried out. The adaptive analysis is based on a finite element error form, which measures the difference between the through-the-thickness distribution of finite element displacement and the actual displacement. The region where the error-measure exceeds the prescribed admitted error value, the finite element mesh locally refined in the thickness direction using the mesh superposition technique. Several numerical tests are conducted to validate the effectiveness of the current approach for adaptive analysis of laminated plates.