• 제목/요약/키워드: Laminar Flame Thickness

검색결과 15건 처리시간 0.017초

화상처리기법에 의한 예혼합 난류전파화염의 구조해석 (The Structural Analysis of Premixed Turbulent Propagating Flames Utilizing the Image Process Technique)

  • 라진홍
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제23권4호
    • /
    • pp.593-600
    • /
    • 1999
  • The structure of premixed turbulent flames in constant volume vessel was investigated by using a laser tomography. The flame structure was visualized by passing a laser sheet with 0.2mm thick and 2 cm wide through the turbulent flames to obtain their 2-D images. From the obtained images islands of reactants as well as of products were found at least in the 2-D images when the turbu-lence intensity was above 0.4m/s. Moreover in order to obtain the characteristic flamelet thickness the light intensities of them were digitized and processed into three colors incorporating two appro-priate threshold values in the image analysis. As the result the averaged value of charactertistic flamelet thickness was found to be about two times compared to laminar one.

  • PDF

메탈화이버 버너에서 매트 두께와 연료 종류에 따른 복사 효율 및 연소 특성에 관한 실험적 연구 (Experimental Study on the Radiation Efficiency and Combustion Characteristics with Respective to the Mat Thickness and the Fuel Kinds in Metal-Fiber Burner)

  • 김재현;이기만
    • 한국수소및신에너지학회논문집
    • /
    • 제29권5호
    • /
    • pp.512-522
    • /
    • 2018
  • This study was conducted to investigate on the combustion characteristic with the effects of mat thickness and fuel kinds in a metal-fiber burner. The mode transition point is confirmed by the K value, which was defined as the rate of flow velocity and laminar burning velocity. The ($T^4_{sur}-T^4_{\infty}$) is highest at methane flame with 3 T thickness. Through the measurement of the unburned mixture temperature, the possibility of submerged flame in surface combustion burner was confirmed. The rapid emission of CO occurs nearby limit blow out (LBO) because of the increase of flow velocity. In case of NOx, the trend is similar with surface temperature. However, it also considered that the NOx emission is affected by residence time with flame position.

이송 배관 내 분진폭발의 화염전파특성 (Flame Propagation Characteristics Through Suspended Combustible Particles in a Full-Scaled Duct)

  • 한우섭
    • Korean Chemical Engineering Research
    • /
    • 제47권5호
    • /
    • pp.572-579
    • /
    • 2009
  • 본 연구에서는 분진폭발에 있어서 기초적 현상을 규명하고 분진의 화염구조와 메커니즘에 대하여 실험적으로 조사하였다. 실험장치는 길이 1.8 m, 단면이 0.15 m의 정방형인 수직연소관을 사용하였으며, 덕트 내를 전파하는 상방 분진층류화염과 화염면에 대하여 고속카메라를 사용하여 가시화하였다. 또한 슐리렌, 이온프로브, 열전대 등을 사용하여 예열대 및 반응대의 두께를 측정하였다. 석송자 분진화염의 예열대 두께는 4~13 mm로 탄화수소가스의 예혼합기 화염보다도 수배 크다. 입자화상유속법(PIV)에 의한 해석 결과, 예열대에서의 미연소 입자의 체류 시간은 입자의 열분해가스 생성에 필요하며, 체류시간은 화염전파속도, 입자속도 및 예열대 두께에 의존하는 것을 알았다.

The Influence of a Vortex on a Freely Propagating Laminar Methane-Air Flame

  • Lee, Ki-Yong
    • Journal of Mechanical Science and Technology
    • /
    • 제18권5호
    • /
    • pp.857-864
    • /
    • 2004
  • The change in the NO emission indices (EINO) in a two-dimensional plane has been investigated, which is due to the interaction between a vortex and methane-air flames established at different equivalence ratios, by solving the field equation. After solving the field equation, the spatial distribution of G-values is obtained. The NO emission index is calculated after applying the appropriate relation between the G-values and the NO production rate or the mass fraction of methane obtained from the library of freely propagating flames created from detailed simulations. When a vortex exists in a reacting flow field, in general EINO slightly increases, whereas ElNO is lowered in the vicinity of the vortex regardless of flow direction. A change in vortex size has negligible impact on EINO$\_$T/ but increasing the vortex strength slightly increases EINO$\_$T/ in the domain of this study.

영역조건평균에 기초한 난류예혼합 화염 전파 속도식 유도 및 검증 (Validation of the Turbulent Burning Velocity Based on Asymptotic Zone Conditional Transport in Turbulent Premixed Combustion)

  • 이동규;허강열
    • 한국연소학회지
    • /
    • 제13권1호
    • /
    • pp.23-30
    • /
    • 2008
  • An analytical expression for the turbulent burning velocity is derived from the asymptotic zone conditional transport equation at the leading edge. It is given as a sum of laminar and turbulent contributions, the latter of which is given as a product of turbulent diffusivity in unburned gas and inverse scale of wrinkling at the leading edge. It was previously shown that the inverse scale is equal to four times the maximum flame surface density in the wrinkled flamelet regime [1]. The linear behavior between $U_T$ and u' shows deviation with the inverse scale decreasing due to the effect of a finite flamelet thickness at higher turbulent intensities. DNS results show that $U_T/S^0_{Lu}$ may be given as a function of two dimensionless parameters, $u'/S^0_{Lu}$ and $l_t/\delta_F$, which may be transformed into another relationship in terms of $u'/S^0_{Lu}$, and Ka. A larger $l_t/{\delta}_F$ or a smaller Ka leads to a smaller scale of wrinkling, hence a larger turbulent burning velocity in the limited range of $u'/S^0_{Lu}$. Good agreement is achieved between the analytical expression and the turbulent burning velocities from DNS in both wrinkled and thickened-wrinkled flame regimes.

  • PDF