• 자원리싸이클링
• /
• 제33권2호
• /
• pp.46-53
• /
• 2024

전기로 제강공정에서 연속주조 조업 완료 후 ladle에 잔존하는 슬래그의 헌열과 슬래그 중 잔존 CaO를 활용하기 위해 전기로 출강 후 ladle 상부에 슬래그를 투입하여 Ladle Furnace(LF) 공정에서의 전력과 생석회의 사용량을 저감하는 공정이 연구되어 산업현장에서 활용되고 있다. 하지만 이러한 공정은 LF 공정과 연속주조 공정상 시점이 맞지 않으면 재활용율이 낮아진다. 슬래그 재활용율을 높이기 위해서 시점이 맞지 않는 경우 ladle의 슬래그를 슬래그 포트에 미리 부은 후 재활용하는 방법에 대해서 LF 조업 영향성을 분석하였다. Ladle 용융 슬래그를 재활용 방법에 대해 열역학 프로그램 Factsage 8.3에서 FSsteel(steel database)와 FToxid(oxide database)를 활용하여 슬래그 조성에 대한 액상화율을 계산하였고, 재활용 방법에 따라 각 10heats 조업 적용을 통해 슬래그 중 탈황능과 LF 조업성에 대해서 비교하였다. 그 결과 연속주조 조업 완료 후 바로 ladle에 슬래그를 재활용하는 방법에서 전력 사용량이 0.3MWh 낮고, LF 조업시간은 1.2분 단축되었으며, 탈황율은 5.8% 높은 결과를 얻었다.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1998년도 추계 학술발표회 논문집
• /
• pp.180-192
• /
• 1998

One of the conventional gas burners has nowadays been used for ladle preheating. As a ladle is one of the open-type furnaces, however, it causes to consume much fuel because of high temperature of exhaust gas from the ladle and the exhaust gas passing through ladle cover makes it worsen a working environment nearby. Therefore, the objective of this study is to develop the recuperative burner system applying for an existing teeming ladle , which is integrated with burner, recuperator and eductor as one of the new type combustion equipments and has many advantages of simple installation, compactness and easy control, especially a great deal of energy saving through the waste heat recovery from exhaust gas. The contents of the study is to design, manufacture of recuperative burner system and to perform its tests experimentally after applying to the teeming ladle in the capacity of 100 ton. Its heat release rate is 1,700,000 kcal/h with COG(Cokes Oven Gas) as fuel gas. The test items are the temperature distribution inside the ladle and the preheated air temperature change depending upon the exhaust gas. Nox, exhaust gas analysis and noise.

• 자원리싸이클링
• /
• 제22권1호
• /
• pp.36-41
• /
• 2013

전기로 제강공정 중 LF 공정에서 슬래그는 전기로(EAF)에서 이월된 슬래그와 출강 중에 조재제인 생석회, 돌로마이트 등이 용강 중에 투입되어 생성된다. LF 조업이 끝나면 ladle은 연속주조 공정(CCM)으로 이송되며, ladle 하부의 노즐을 통해 tundish로 용강을 내보내어 연속 주조조업을 하게 된다. 일반적으로 연속 주조공정 후 ladle에 남는 슬래그와 잔강(殘鋼)은 슬래그 포트(Pot)에 받아 슬래그 야적장으로 이송되어 파쇄 후 처리된다. 본 연구에서는 연속 주조공정 후 ladle에 잔류한 용융슬래그(잔강(殘鋼) 포함)를 전기로 출강 후에 ladle 상부에 직접 투입하여 LF 공정 초기의 슬래그를 형성하는데 활용하고자 하였다. 그 결과 LF 공정 중에 사용되는 생석회의 원단위는 2.2 ~ 3.2 kg/steel-ton 저감되었으며, 용강의 생산회수율은 0.3 ~ 0.5% 증가되었다.

• 한국환경과학회지
• /
• 제26권8호
• /
• pp.955-966
• /
• 2017

Amendment of multi-binders was employed for the immobilization of metal(loid)s in field-contaminated soils to reduce the leaching potential. The effect of different types of multi-binders (lime/diammonium phosphate, diammonium phosphate/ladle slag and lime/ladle slag) on the solidification/stabilization of metal(loid)s (Pb, Zn, Cu and As) from the smelter soil and mine tailing soil were investigated. The amended soils were evaluated by measuring Toxicity Characterization Leaching Procedure (TCLP) leaching concentration of metal(loid)s. The results show that the leaching concentration of metal(loid)s decreased with the immobilization using multi-binders. In terms of TCLP extraction, the mixed binder was effective in the order of lime/ladle slag > diammonium phosphate/ladle slag > lime/diammonium phosphate. When the mixed binder amendment (0.15 g lime+0.15 g ladle slag for 1g smelter soil and 0.05 g lime+0.1 g ladle slag for 1 g mine tailing soil, respectively) was used, the leaching concentration of metal(loid)s decreased by 90%. However, As leaching concentration increased with diammonium phosphate/lime and diammonium phosphate/ladle slag amendment competitive anion exchange between arsenic ion and phosphate ion from diammonium phosphate. The Standard, Measurements and Testing programme (SM&T) analysis indicated that fraction 1 (F1, exchangeable fraction) decreased, while fraction 4 (F4, residual fraction) increased. The increased immobilization efficiency was attributed to the increase in the F4 of the SM&T extraction. From this work, it was possible to suggest that both arsenic and heavy metals can be simultaneously immobilized by the amendment of multi-binder such as lime/ladle slag.

• 자원리싸이클링
• /
• 제11권3호
• /
• pp.17-24
• /
• 2002

There has been an increasing demand over the years for steels with lower[s] content. For the purpose of improving the efficiency of desulphrization in the powder injection process of ladle, experimental studies were carried out by using cold model to optimize the lance configuration, gas flow rate, immersion depth of lance nozzle, position of lance nozzle relative to the ladle and the effect with slag, etc. As the results of this study, it was made clear that 2-hole nozzle lance (C, E type) placed in an asymmetric position gives the shortest mixing times.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 추계종합학술대회
• /
• pp.893-896
• /
• 2007

본 논문에서 제안하는 시스템은 Ladle 나탕의 상태를 카메라를 사용하여 Ladle 탕면을 관측하고 획득한 영상데이터를 주조정장치로 보내게 되는데, 이러한 영상데이터를 보내기 위해서는 유선 송수신 방식은 Ladle의 회전 특성상 사용하지 못하므로 무선 송수신 방식을 사용한다. 또한 초고온 환경이므로 고온에 견딜 수 있도록 Housing 기술을 이용한 Dual 영상카메라 장착 관측시스템을 구축하고, 탕면 거리, 버블 영상 등을 통해 그 크기를 산출하는 알고리듬을 제안한다. 제안한 알고리듬에 따라 20분의 연주시간에 대하여 19.25Cm의 지름을 가친 Bubble의 크기를 계산할 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.310-315
• /
• 2000

We analyzed thermal stress of the STS VOD ladle by the variation of material property of refractory, and determined the location of back filler using FE analysis. Thermal distribution of refractory of ladle between hot face and back face were decreased by the increasing the thermal conductivity, and thermal stress of refractory were decreased about 2 to 4 times with the decreasing the young's modulus coefficients. Back filler, which is constructed to absorb the thermal expansion of dolomite refractory, has relatively low thermal conductivity. Inner side of refractory of ladle maintained high temperature, but temperature of outer side of ladle decreased low. Consequently, inner expansion and outer contraction were appeared. and thermal stress were increased, so thermal stress by the construction of back filler were increased.

• 한국주조공학회지
• /
• 제30권3호
• /
• pp.115-120
• /
• 2010

Recently, an advanced raw material supplying system in diecasting industry that molten metal produced by the raw material supplier can be directly delivered to the diecasting shops was proposed. It was known to have advantages of reducing melting process cost and improving working environment. However, for its successful mass production, the development of high insulation ladle is inevitable. In this study, the optimal mixing ratio of $SiO_2-Al_2O_3$ was investigated and the high insulation ladle with computer simulation result was built in a prototype and evaluated. The prototype which has refractory wall of $SiO_233%-Al_2O_3$ 35%-CaO 33% showed high insulation sufficient for carrying the Al molten metal for 138 minutes. Gas quantity result and SEM-EDS analysis on the melt poured in the ladle also showed extremely low level of 0.028 cc / 100 g and no penetration of Al molten metal into the refractory wall, satisfying the requirements for mass production.

• 한국주조공학회지
• /
• 제25권6호
• /
• pp.254-258
• /
• 2005

Semisolid process is possible in any material system possessing a freezing range where the microstructure should consist of the nondendritic globular solid phase separated and enclosed by the liquid phase, referred to as semisolid slurry. There are two primary semisolid processing routes, thixocasting and rheocasting. Especially, rheocasting process has become a new focus in the field of semisolid process because of its many advantages such as no special billet required and possibility of in-house scrap recycling, compared with the thixocasting process. In-Ladle direct thermal control (DTC) rheocasting has been developed, based on the fact that there is slurry and mush transition in every molten metal and the transition, which normally occurs in the range of liquid traction of 0.1 to 0.6, could be controlled by controlling solid shape and relative solid-liquid interfacial energy. In this study, A356 Al alloy was investigated to verify In-Ladle DTC rheocasting for obtaining semisolid slurry. Modeling of heat transfer was carried out to investigate the effect of pouring temperature and ladle material, geometry and temperature and the simulation results were compared with the actual experiments.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2000년도 추계학술대회
• /
• pp.107-107
• /
• 2000