• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.1
• /
• pp.47-53
• /
• 2018

Recovery of lactic acid from fermentation broth using chemical precipitation was investigated with various chemicals. Effects of chemical types, mixing speeds, settling duration, and solvent addition were evaluated to improve the recovery rates of lactic acid. Overall, recovery efficiencies increased as the dosage of chemicals increased. Recovery rate of lactic acid by CaO was higher than those of $Ca(OH)_2$ and $CaCO_3$. Recovery of lactic acid increased by 48% under the optimized reaction conditions which included a mixing speed at 180 rpm, a settling duration of 24 h, and addition of ethanol at 25%(v/v). Practical application needs to consider types and concentrations of other organic acids as well as lactic acid. Based upon the results of fluorescence excitation emission matrix (FEEM), size exclusion chromatography (SEC), characteristics of recovered lactic acid were same as that in the fermentation broth.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.6
• /
• pp.1163-1169
• /
• 2004

An unstructured mathematical model is presented for lactic acid fermentation based on the energy balance. The proposed model reflects the energy metabolic state and then predicts the cell growth, lactic acid production, and glucose consumption rates by relating the above rates with the energy metabolic rate. Fermentation experiments were conducted under various initial lactic acid concentrations of 0, 30, 50, 70, and 90 g/l. Also, a genetic algorithm was used for further optimization of the model parameters and included the operations of coding, initialization, hybridization, mutation, decoding, fitness calculation, selection, and reproduction exerted on individuals (or chromosomes) in a population. The simulation results showed a good fit between the model prediction and the experimental data. The genetic algorithm proved to be useful for model parameter optimization, suggesting wider applications in the field of biological engineering.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.6
• /
• pp.1059-1064
• /
• 1998

Fermented beverage using lactic acid bacteria isolated from kimchi was investigated. Lactic acid bacteria KL 1, KD 6, KL 4 strains from kimchi, or obtained Lactobacillus acidophilus, Lactobacillus plantarum, Leuconostoc mesenteroides with and without yeast(Saccharomyces cerevisiae) were inoculated in fruit vegetable juice for single and mixed culture fermentation. During the fermentation by bacterial strain and yeast for 1~3 days at 30oC, various fermentation behaviors were observed. The growth rate of mixed culture of KL 1 and yeast was higher than that of single culture by KL 1 alone during the fermentation. The amount of organic acid produced by the mixed culture fermentation of KL 1 and yeast was 0.82%(3 day) or 0.58%(1 day) and with the final pH of 3.3(3 day) or 4.2(1 day). These mixed culture systems of isolated strains or other bacterial strains had almost similar results of growth rate and acid production. Among several bacterial strains, KL 1 was suitable for the mixed culture fermentation with yeast in terms of desirable fermentation behavior and organoleptical quality. The selected strain, KL 1 was identified as Leuconostoc spp. through the series of tests on carbohydrate fermentation and biochemical characteristics.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.5
• /
• pp.869-877
• /
• 2017

Lactic acid bacteria (LAB) are used as fermentation starters in vegetable and dairy products and influence the pH and flavors of foods. For many centuries, LAB have been used to manufacture fermented foods; therefore, they are generally regarded as safe. LAB produce various substances, such as lactic acid, ${\beta}$-glucosidase, and ${\beta}$-galactosidase, making them useful as fermentation starters. Existing functional substances have been assessed as fermentation substrates for better component bioavailability or other functions. Representative materials that were bioconverted using LAB have been reported and include minor ginsenosides, ${\gamma}$-aminobutyric acid, equol, aglycones, bioactive isoflavones, genistein, and daidzein, among others. Fermentation mainly involves polyphenol and polysaccharide substrates and is conducted using bacterial strains such as Streptococcus thermophilus, Lactobacillus plantarum, and Bifidobacterium sp. In this review, we summarize recent studies of bioconversion using LAB and discuss future directions for this field.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.11
• /
• pp.1582-1588
• /
• 2005

This study aimed to evaluate the effects of silage additives on the fermentation qualities and residual mono- and disaccharides composition of silages. Forage Oats (Avena sativa L.) and Italian Ryegrass (Lolium multiflorum Lam.) were ensiled with glucose, sorbic acid and pre-fermented juice of epiphytic lactic acid bacteria (FJLB) treatments for 30 days. In both species grass silages, although the respective controls had higher contents of butyric acid (20.86, 33.45g $kg^{-1}$ DM) and ammonia-N/total nitrogen (100.07, 114.91 g $kg^{-1}$) as compared with other treated silages in forage oats and Italian ryegrass, the fermentation was clearly dominated by lactic acid bacteria. This was well indicated by the low pH value (4.27, 4.38), and high lactic acid/acetic acid (6.53, 5.58) and lactic acid content (61.67, 46.85 g $kg^{-1}$ DM). Glucose addition increased significantly (p<0.05) lactic acid/acetic acid, and significantly (p<0.05) decreased the values of pH and ammonia-N/total nitrogen, and the contents of butyric acid and volatile fatty acids as compared with control, however, there was a slightly but significantly (p<0.05) higher butyric acid and lower residual mono- and di-saccharides as compared with sorbic acid and FJLB additions. Sorbic acid addition showed the lowest ethanol, acetic acid and ammonia-N/total nitrogen, and highest contents of residual fructose, total mono- and di-saccharides and dry matter as well as high lactic acid/acetic acid and lactic acid content. FJLB addition had the lowest pH value and the highest lactic acid content, the most intensive lactic acid fermentation occurring in FJLB treated silages. This resulted in the faster accumulation of lactic acid and faster pH reduction. Sorbic acid and FJLB additions depressed clostridia or other undesirable bacterial fermentation, thus this decreased the water-soluble carbohydrates loss and saved the fermentable substrate for lactic acid fermentation.

• The Korean Journal of Food And Nutrition
• /
• v.29 no.2
• /
• pp.237-245
• /
• 2016

In this study, the physicochemical and sensory characteristics of low-salt Myungran jeotkal (Alaskan pollock roe) were evaluated after fermentation at $4^{\circ}C$ and $20^{\circ}C$ with or without the addition of deep sea water, salt from deep sea water, and vegetable-origin lactic acid bacteria (Lactobacillus fermentum JS, LBF). When fermented at $20^{\circ}C$, the addition of LBF to Myungran jeotkal resulted in a slow increase in lactic acid content, followed by an abrupt increase after five days of fermentation. However, when fermented at $4^{\circ}C$, the lactic acid content did not change significantly. Further, when Myungran jeotkal fermented at $4^{\circ}C$, the pH decreased as lactic acid production increased. The salinity of Myungran jeotkal fermented at $4^{\circ}C$ and $20^{\circ}C$ was 7% and was not affected by fermentation period. When fermented at $20^{\circ}C$, volatile basic nitrogen and amino nitrogen contents increased with increasing duration of fermentation. Further, volatile acid content decreased, however, the content of amino nitrogen increased after 11 days of fermentation with LBF and no salt effects were observed. When fermented at $20^{\circ}C$ for 13 days, preference (sensory evaluation) was the highest in all experimental groups after 9 days of fermentation, and then decreased as the fermentation period increased. The free amino acid content was highest (1,648.8 mg/100 g) in Myungran jeotkal when sun-dried salt and LBF were added, 2.3 times higher than in the control.

• Food Science and Preservation
• /
• v.6 no.2
• /
• pp.245-254
• /
• 1999

Traditionally, lactic acid bacteria(LAB) is microorganism that has been used for food fermentation. Bacteriocinogenic culture and by-products of lactic acid bacteria have the antimicrobial effect. The antimicrobial effect of lactic acid bacteria enable to extend the shelf life of many foods through fermentation processes. Therefore, a lot of investigation of antimicrobial compounds from LAB have been studied on the effect of foods preservation of fish, meat, dairy product, refreserated nonfermentive food and so on. However a little research on the effects of LAB in fruit and vegetables preservation has been reported. In this study, effectiveness of LAB as a quality preservative in fruit and vegetables storage were reviewed.

• KSBB Journal
• /
• v.31 no.1
• /
• pp.85-89
• /
• 2016

Lactic acid fermentations were conducted using water hyacinth. It is known that the pretreatment and enzyme hydrolysis process optimize the potential of water hyacinth. Lactic acid produced by using lactic acid bacteria. All cells were grown at $37^{\circ}C$ and initial pH 5.5. Lactic acid production was measured by HPLC. All Lactobacillus strains could produce lactic acid from pretreated water hyacinth. The highest lactic acid was achieved when lactic acid fermentation was carried out by L. delbrueckii for D-form and L. helveticus for L-form lactic acid production. The lactic acid concentration was 10.70 g/L by L. delbrueckii and it converted glucose in the medium to lactic acid, almost perfectly. Lactic acid production became higher when fermentation was carried out at a controlled pH 5.5. Lactic acid yield and productivity were 0.52 g/g and 0.19 g/L/h for L. helveticus, while L. delbrueckii was 0.64 g/g and 0.27 g/L/h. This study showed that water hyacinth medium could be alternative medium which can replace the complex and expensive medium for growing Lactobacillus strains in production of lactic acid.

• Journal of Applied Biological Chemistry
• /
• v.63 no.4
• /
• pp.429-437
• /
• 2020

This study aimed to investigate the change in physicochemical properties and lactic acid bacterial communities during kimchi fermentation at different temperatures (8, 15, and 25 ℃) using two molecular genetics approaches, multiplex polymerase chain reaction and 16S rRNA gene sequencing. The pH during fermentation at 8, 15, and 25 ℃ decreased from 6.17 on the initial fermentation day to 3.92, 3.79, and 3.48 after 54, 30, and 24 days of fermentation, respectively, while the acidity increased from 0.24% to 1.12, 1.35, and 1.54%, respectively. In particular, the levels of lactic acid increased from 3.74 g/L on the initial day (day 0) to 14.43, 20.60, and 27.69 g/L during the fermentation after 24, 18, and 12 days at 8, 15, and 25 ℃, respectively, after that the lactic acid concentrations decreased slowly. The predominance of lactic acid bacteria (LAB) in the fermented kimchi was dependent on fermentation stage and temperature: Lactobacillus sakei appeared during the initial stage and Leuconsotoc mesenteroides was observed during the optimum-ripening stage at 8, 15, and 25 ℃. Lac. sakei and Lactobacillus plantarum grew rapidly in kimchi produced at 8, 15, and 25 ℃. In addition, Weissella koreensis first appeared at days 12, 9, and 6 at 8, 15, and 25 ℃ of fermentation, respectively. This result suggests that LAB population dynamics are rather sensitive to environmental conditions, such as pH, acidity, salinity, temperature, and chemical factors including free sugar and organic acids.

• The Korean Journal of Community Living Science
• /
• v.21 no.4
• /
• pp.509-515
• /
• 2010

The physicochemical properties of the lactic acid fermented rice flour prepared using ABT-L(mixture of Lactobacillus acidophilus, Bacillus longum, Streptococcus thermophilus) were investigated. The efficiency of deproteinizing of lactic acid fermentated rice was higher than soaking fermented rice. The structural properties of lactic acid fermented rice flour showed slightly decreased inner particle size but maintained regular structural form. Molar mass and molar size after being treated with soaking or lactic acid fermentation were decreased. Amylograms except for pasting temperature of lactic acid fermented rice flours or soaking fermented rice flours were more significantly decreased than the control sample. The ratio of flours passed through 100 mesh and 150 mesh sieves of lactic acid fermented rice flours were higher than soaking fermented rice flours. Lactic acid fermented rice flours being passed through 100 mesh sieves showed finer particle flours than those treated with soaking. These results showed that lactic acid fermentation, which can have a high efficiency on the deproteinizing of rice, contributed to the changes of particle size and its distribution of rice flour.