• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.768-773
• /
• 2020

In large-scale land development for the rational use and management of national land resources, the use of geospatial information is essential for the efficient management of projects. Recently, drone LiDAR (Light Detection And Ranging) has attracted attention as an effective geospatial information construction technique for large-scale development areas, such as housing site construction and open-pit mines. Drone LiDAR can be classified into a method using SLAM (Simultaneous Localization And Mapping) technology and a GNSS (Global Navigation Satellite System)/IMU (Inertial Measurement Unit) method. On the other hand, there is a lack of analytical research on the application of drone LiDAR or the characteristics of each method. Therefore, in this study, data acquisition, processing, and analysis using SLAM and GNSS/IMU type drone LiDAR were performed, and the characteristics and utilization of each were evaluated. As a result, the height direction accuracy of drone LiDAR was -0.052~0.044m, which satisfies the allowable accuracy of geospatial information for mapping. In addition, the characteristics of each method were presented through a comparison of data acquisition and processing. Geospatial information constructed through drone LiDAR can be used in several ways, such as measuring the distance, area, and inclination. Based on such information, it is possible to evaluate the safety of large-scale development areas, and this method is expected to be utilized in the future.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.50 no.1
• /
• pp.1-19
• /
• 2022

The Geumgang Pine (Pinus densiflora) Forest in Sogwang-ri, Uljin has traditionally been a pine tree protection area (prohibited forest) for timber production purposes, and is now designated and managed as a protected area for forest genetic resource conservation by the Korea Forest Service. This study, we analyzed topographical characteristics, existing vegetation, tree age, and plant community structure, and proposed a sustainable management method for the Geumgang Pine (Pinus densiflora) Forest in Sogwang-ri, Uljin for timber havesting purposes. The topographical characteristics of the target area were 36.7% ridges and 38.7% valleys; the ratio of ridges to valleys was similar, and the slopes formed 24.7% of the total area. The types of pine forest communities are divided into six types based on the progress of pine forest renewal, the competition with other species such as deciduous broadleaf trees, and the formation of layered structures. It has been confirmed that the age of the large-diameter pine trees (40~60cm in diameter) is approximately 60~70 years, which is relatively low. As a result of the analysis of the relative importance percentage and layered structure, differences depended on the progress of the pine forest renewal project, and not only the maintenance of the pine forest, but also the creation of a secondary growth forest, the density adjustment of pine trees, and the active management of competitive trees. The average basal area by the community was 12,642.1~25,424.4cm² for the tree layer and 1.8~1,956.5cm² for the low tree layer based on a quadrat of 400m². The difference in the basal area appeared to depend on the size and number of trees forming the tree layer and the degree of pine forest renewal (the degree of time elapsed after thinning pine trees). The average number of species that appeared in each community was 8.7-20.3; there were many species located in valleys, and the type competes with deciduous broadleaf trees due to the lack of management. The diversity of species ranged from 0.6915-1.0942, and was evaluated as low compared to pine communities in central temperate zones. In this paper, we determined the management goals of Geumgang Pine (Pinus densiflora) Forest in Sogwang-ri, Uljin to produce timber with high economic value, and suggested efficient vegetation management for continuous afforestation, the establishment of a timber production system, and improvement of wood production as a management direction.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.1
• /
• pp.163-169
• /
• 2020

The purpose of this study is to find out whether the environment is based on the Color Universal Design (CUD, CUD Recommended Color Set Guidebook), which is located in the area with the highest proportion of elderly people in the city of Busan in Korea. Five nearby parks in the walking district of Busan were selected to measure the environmental color with a spectrophotometer(Minolta CM-2600d) and web color search. The range of the color survey was limited to the pavement; public facilities(sign, benches, restroom), and exercise&sports facilities. The results of the study are as follows. Overall, the Y color group was dominant, with similar color usage and intensity, and similar levels of saturation. This was analyzed based on the Color Universal Design theory, suggesting that the visual characteristics of the elderly were not taken into account, and the Neighborhood Park located in Busan was found to lack the environmental color of consideration for the visual characteristics. In addition, this study could act as a basic study that can be applied to social and environmental colors that reflect the color perception and cognitive characteristics of the elderly.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.10 no.3
• /
• pp.102-106
• /
• 2008

This study was carried out to evaluate the relationships between stand attributes and litterfall amounts in a 28-year old Quercus acutissima stand. Eighteen sampling plots of $20m{\times}20m$ were chosen and litterfall was collected from May 2005 to December 2006. There was no correlation between stand attributes(tree density, mean diameter at breast height, mean height, basal area) and litterfall amounts except for flower and miscellaneous litter for the study period. There were no significant relationships between leaf litter and basal area(r=0.02, 0.05; P=0.93, 0.83) and between leaf litter and tree density(r=-0.10, 0.05; P=0.85, 0.69). Also, leaf litter was affected neither by mean diameter at breast height(r=-0.08, 0.30; P=0.73, 0.22) nor by mean height(r=-0.24, 0.09; P=0.34, 0.70). Other litter amounts such as bark, branch, and acorn showed no relationships with the stand attributes (P>0.05). The lack of significant relationships between litterfall amounts and stand attributes could be due to the closed canopy with a complete crown cover in this mature oak stand.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.6
• /
• pp.235-243
• /
• 2008

Construction projects have unique characteristics that these may be carried out by contractors thus, cost should be estimated before execution. The importance of cost estimation and cost check has become increasingly emphasized in all phases of construction project that would be performed numerously. It is needed that owner have to estimate reasonable budget, and contractor should predict the bid price. However, there are lack of standard cost estimation method before quantity takeoff, cost analysis method, and cost database thus, the method of area cost, such as square foot method, is as used as ever in Korea. Therefore, this research suggested standard cost database structure CUBE, and analysis method of item quantity per one household categorized by area type. Whereafter, database of all item quantity of finish work has been built with 90 building cost data, and validated it's availability. In this respect, the suggested method and the findings from this research are expected to help enhancing the efficiency and productivity of cost estimation in Korea.

• Korean Journal of Plant Taxonomy
• /
• v.43 no.2
• /
• pp.128-138
• /
• 2013

The conservation status of an endemic perennial herb, Hanabusaya asiatica (Nakai) Nakai (Campanulaceae) was determined by applying the IUCN risk assessment criteria from our field study and available specimen data. Also, the GIS technology was used to develop a species distribution map to calculate the extent of occurrence (EOO) and area of occupancy (AOO) for the taxon. After two years of continuous field studies, 269 mature individuals were found in four localities in 2011, while 216 mature individuals were confirmed in three localities in 2012. Based on the following data, such as EOO (2,742 $km^2$), AOO (76 $km^2$) and estimated population size of mature individuals, the taxon, which is known as 20 localities in Korean peninsula, is evaluated as the category of Endangered (EN). A major difficulty in application of IUCN criteria to Korean rare plants were the lack of essential biological information and understanding the correct knowledge of the IUCN criteria in previous Korean studies. Sound conclusions regarding the conservation status of individual species require more intensive population studies, observations, and applying IUCN assessment procedures correctly.

• Journal of Korean Society of Forest Science
• /
• v.80 no.4
• /
• pp.369-378
• /
• 1991

Major statutory nature protection areas include Nature Parks, Nature Reserves. Nature Ecological System Protected Areas. Biosphere Reserves, Nature Protected Forests, Wildlife Sanctuaries, and Protection Forests with total area of 1,124,000 ha. These protected areas cover almost 18% of the forested area. The number of visitors of NPs reached over 33 million per year with sharp increasing rate over the years. To protect the deteriorated hiking trails and camp grounds caused by overuse, two management policies have been implemented : cooking prohibition and natural rest rotation system. While prohibition of cooking is based on the fact that most of the solid wastes in nature parks are leftovers of cooking, natural rest rotation system is mainly for rehabilitation of deteriorated areas by natural processes. The system has closed 47 trails(in 27 mountains) throughout the country since January 1991, which is scheduled to continue 3 years. Due to the lack of accumulated scientific knowledge on how, when and where to close, application of the system leaves much to be desired. This paper discusses the current efforts to protect the natural resources for recreational use and suggests future directions for an effective policy implementation.

• The Journal of the Korea Contents Association
• /
• v.17 no.1
• /
• pp.444-454
• /
• 2017

Stop-motion animation is highly valued for realistic imagery and its ability to captivate the five senses of the audience. Despite this, practical research in this area is limited to date. The long hours required to produce stop-motion animation and turn these into profits can be attributed for the lack of knowledge in this area. In production research, the matter is made worse as it is difficult to protect the intellectual property made through the collaborated efforts of students and teaching staff through each laborious stage of planning, broadcasting and making 2D models. Meanwhile as the animation industry finds the investigation of new production processes taxing, it has maintained its focus on pre-existing processes such as the use of pipeline. This paper aims to shed light on new production methods that can be used to improve the effectiveness of existing stop-motion production. In addition, by working with Taktoon Enterprises on its T.V series Galaxy Kids the paper will revise real world production methods including the traditional use of hand made models. Thus by investigating the use of graphic technology such as 3D printing the paper will be able to extend current business models. Research conducted in this paper is a necessary part of overcoming various contents production obstacles. Furthermore, it may help publicize issues faced in production leading to the discussion and sharing of new innovations.

• Journal of Environmental Health Sciences
• /
• v.48 no.1
• /
• pp.1-8
• /
• 2022

Objectives: The purpose of this study is to reveal the circumstances under which the cases of harm to health caused by humidifier disinfectant were neglected and show the points where the number of victims and the degree of damage could have been reduced. In addition, it attempts to describe how damage management proceeded immediately after the incident and actually exacerbated the damage. Finally, it explores the unfortunate aspects of the recent trial. By doing so, it attempts to take this as an opportunity to consider whether a tragic event such as the humidifier disinfectant incident could occur in the future. Methods: This study collected and analyzed data on chemical material characteristics related to humidifier disinfectants, data on health effect characteristics, data on related laws and regulations from the Ministry of Environment, data related to the damage investigation by the Korea Environmental Industry and Technology Institute, and current contents. Results: The lack of related systems and laws is the area where the greatest responsibility for the cause of the humidifier disinfectant disaster falls, so it is difficult for the government to escape this responsibility. Establishing a dedicated department to identify the prevalence of certain diseases within the functions of the Health Insurance Review and Assessment Service to monitor health can greatly contribute to the prevention and management of diseases through early detection and management of group outbreaks caused by harmful factors. Humidifier disinfectant damage relief should have been expanded earlier beyond HDLI (humidifier disinfectant lung injury) to include non-specific diseases such as asthma, pneumonia, and interstitial pneumonia. The scope of relief benefits should have also been expanded earlier to include the payment of disability benefits. Fortunately, with the 2020 revision of the Special Act, the conditions for estimating causal relations were eased and individual screening systems such as health impact assessment were reorganized along with the introduction of a rapid screening system. Conclusions: The management system for chemical substances in a country is clearly of paramount importance, and the ministry in charge must have a response system in case of damage to health effects. Administration that looks at the victims' situation from their point of view is needed, and technical countermeasures are required to quickly recognize the prevalence of certain diseases.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.3
• /
• pp.233-240
• /
• 2011

Purpose: To apply a computer assisted navigation system to orthognathic surgery, a simple and efficient measuring algorithm calculation based on affine transformation was designed. A method of improving accuracy and reducing errors in orthognathic surgery by use of an optical tracking camera was studied. Methods: A total of 5 points on one surgical splint were measured and tracked by the Polaris $Vicra^{(R)}$ (Northern Digital Inc Co., Ontario, Canada) optical tracking system in two cases. The first case was to apply the transformation matrix at pre- and postoperative situations, and the second case was to apply an affine transformation only after the postoperative situation. In each situation, the predictive measuring value was changed to the final measuring value via an affine transformation algorithm and the expected coordinates calculated from the model were compared with those of the patient in the operation room. Results: The mean measuring error was $1.027{\pm}0.587$ using the affine transformation at pre- and postoperative situations and the average value after the postoperative situation was $0.928{\pm}0.549$. The farther a coordinate region was from the reference coordinates which constitutes the transform matrixes, the bigger the measuring error was found which was calculated from an affine transformation algorithm. Conclusion: Most difference errors were brought from mainly measuring process and lack of reproducibility, the affine transformation algorithm formula from postoperative measuring values by using of optic tracking system between those of model surgery and those of patient surgery can be selected as minimizing the difference error. To reduce coordinate calculation errors, minimum transformation matrices must be used and reference points which determine an affine transformation must be close to the area where coordinates are measured and calculated, as well as the reference points need to be scattered.