• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.3
• /
• pp.177-184
• /
• 2020

Purpose: The purpose of this study was to compare and evaluate the tensile bond strength of chairside reline resin to denture base resin fabricated by different methods (subtractive manufacturing, additive manufacturing, and conventional heat-curing). Materials and methods: Denture base specimens were fabricated as cuboid specimens with a width of 25 mm × length 25 mm × height 3 mm by subtractive manufacturing (VITA VIONIC BASE), additive manufacturing (NextDent Base) and conventional heat-curing (Lucitone 199). After storing the specimens in distilled water at 37℃ for 30 days and drying them, they were relined with polyethyl methacrylate (PEMA) chairside reline resin (REBASE II Normal). The subtractive and additive manufacturing groups were set as the experimental group, and the heat-curing group was set as the control group. Ten specimens were prepared for each group. After storing all bound specimens in distilled water at 37℃ for 24 hours, the tensile bond strength between denture bases and chairside reline resin was measured by a universal testing machine at a crosshead speed of 10 mm/min. The fracture pattern of each specimen was analyzed and classified into adhesive failure, cohesive failure, and mixed failure. Tensile bond strength, according to the fabrication method, was analyzed by 1-way ANOVA and Bonferroni's method (α=.05). Results: Mean tensile bond strength of the heat-curing group (2.45 ± 0.39 MPa) and subtractive manufacturing group (2.33 ± 0.39 MPa) had no significant difference (P>.999). The additive manufacturing group showed significantly lower tensile bond strength (1.23 ± 0.36 MPa) compared to the other groups (P<.001). Most specimens of heat-curing and subtractive manufacturing groups had mixed failure, but mixed failure and adhesive failure showed the same frequency in additive manufacturing group. Conclusion: The mean tensile bond strength of the subtractive manufacturing group was not significantly different from the heat-curing group. The additive manufacturing group showed significantly lower mean tensile bond strength than the other two groups.

• Journal of Radiation Protection and Research
• /
• v.33 no.2
• /
• pp.61-65
• /
• 2008

Objective: To reduce urinary side effects in prostate cancer patients receiving radiation, patients were asked to drink certain amount of water to maintain bladder volume constant and the bladder volumes were measured weekly using ultrasound scanner. Materials and Methods: Twenty-six patients with prostate cancer who received radiation between December 2002 and August 2007 were enrolled in this study. Thirteen patients were enrolled in experimental group. These patients were asked to drink 450 cc of water, one hour prior to simulation, CT scan, and treatment. The other thirteen patients were given no information about bladder filing. Bladder, prostate, and rectum were contoured on CT and volumes were calculated. 3D conformal treatment planning was performed and effective volumes of bladder were calculated when a prescription dose of 70.2 Gy was delivered. For the patients in experimental group, bladder volumes were measured weekly using ultrasound scanner for 6-8 weeks and the bladder volume variations were analyzed. Results: Average bladder volumes and standard deviations obtained at CT scanning were $283.5{\pm}114.0\;cc$ (40%) and $181.2{\pm}120.1\;cc$ (66%) in experimental and control groups, respectively. Although it was not statistically significant, there was correlation between the bladder volumes measured from CT and ultrasound. The volumes measured using ultrasound scanner were 62% lower than the volumes using CT images on average. There was significant variations in volumes measured weekly for 6-8 weeks. It ranged between 33 - 75 %. Conclusion: Our results showed that it is possible to obtain larger bladder volume if they are asked to drink certain amount of water prior to CT scan. However, patients were unable to maintain constant bladder volumes over the 6-8 weeks of treatment period although they were asked to drink constant amount of water.

• Journal of Aquaculture
• /
• v.21 no.1
• /
• pp.26-33
• /
• 2008

This study investigated the synergistic effects of dietary supplementation of quartz porphyry(QP) and a laboratory developed feed stimulants, BAISM(BS) on growth performance and utilization as the additives for juvenile eel Anguilla japonica. Six isoenergetic experimental diets(18.2 kJ/g) were formulated to contain 50% crude protein, 15% lipid with or without dietary QP(Song-Gang stone, Davistone, Korea) and BS supplementation. QP and BS were provided at 0% in the control diet($Q_0B_0$) and at 0.7% QP+0% BS($Q_{0.7}B_0$), 0.7% QP+0.3% BS($Q_{0.7}B_{0.3}$), 0.7% QP+0.5% BS($Q_{0.7}B_{0.5}$), 0.7% QP+0.75% BS($Q_{0.7}B_{0.75}$) and 0.7% QP+1.0% BS($Q_{0.7}B_{1.0}$) in experimental diets on dry matter basis. After four weeks of adaptation, triplicate groups of 30 fish initially averaging $15{\pm}0.1g(mean{\pm}SD)$ were randomly distributed into each aquarium, and they were fed one of the experimental diets for 8 weeks. By the end of the feeding trial, weight gain(%), specific growth rate(%), feed efficiency(%) and protein efficiency ratio of fish fed diet $Q_{0.7}B_{0.5},\;Q_{0.7}B_{0.75}\;and\;Q_{0.7}B_{1.0}$, were significantly higher(P<0.05) than those of fish fed the other diets. But, $Q_{0.7}B_{0.5},\;Q_{0.7}B_{0.75}\;and\;Q_{0.7}B_{1.0}$ were no significant differences(P<0.05). In challenge test, fish were infected by intraperitoneal injection of 0.1 mL bacterial suspension with Edwardsiella tarda per fish after the feeding trial. As a result, fish fed QP and BS supplemented diets have a significantly higher cumulative survival rate than those of fish fed control diet(P<0.05). In conclusion, these results indicated that the optimum dietary supplementation level of QP and BS could be approximately 0.7% quartz porphyry+0.5% BAISM($Q_{0.7}B_{0.5}$) of diet based on WG, FER, SGR, PER, cumulative survival rate in juvenile eel A. japonica.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1981.05a
• /
• pp.3.2-3
• /
• 1981

This paper was attemped to analize 55 cases of fiberoptic bronchoscopy during period of 3 years from Feb. 1978 till Feb. 1981 in Chung Ang University hospital. The results were as follow; 1) In age distribution; Most common age group was 5th decade (15 cases, 27.2%) and the other age groups showed relatively even distribution. 2) The ratio of male to female was 3 to 1. 3) The chief complaints were presented in following order; cough (52%), hemoptysis(25%), dyspnea(23.6%), chest pain(18%), chest disomfort(9%). 4) Direct smear of bronchoscopic aspiration material; Not found 33 cases (60%) were most common finding. In the founded bacteria Gram positive cocci 2 cases (3.6%), Gram negative cocci 2 cases (3.6%), Gram positive bacilli 1 cases (1.8%), Gram negativebacilli 2 cases (3.6%), mixed form 15 cases(27.2%) were presented. 5) Bacterial culture of bronchoscopic aspiration material; No growth 28 cases (50.9%) were most common finding. In the bacterial growth, alpha hemolytic streptococci 10 cases (18.2%), Neisseria group 7cases(12.7%), Klebsiella 2 cases (3.6%), Pseudomonas 2 cases (3.6%), mixed culture 6 cases (10.9%) were presented, 6) The diagnosis of bronchoscopic appearance, laboratory exam., and pathologic exam. of biopsed specimen were 21 cases (38.1%) primary carcinoma of bronchus, 8 cases (14.5%) pulmonary tuberculosis, 7 cases (12.7%) bronchitis in orders.

• Membrane Journal
• /
• v.19 no.4
• /
• pp.317-323
• /
• 2009

In this study the nanofiltration (NF) membrane treatment of a nitric acid waste solutions containing $Pb^{+2}$ heavy metal ion discharging from the etching processes of an electronics and semiconductors industry has been studied for the purpose of recycling of nitric acid etching solutions. Three kinds of NF membranes (General Electric Co. Duraslick NF-4040 membrane, Dow Co. Filmtec LP-4040 membrane and Koch Co. SelRO MPS-34 4040 membrane) were tested for their separation efficiency (total rejection) of $Pb^{+2}$ ion and membrane stability in nitric acid solution. NF experiments were carried out with a dead-end membrane filtration laboratory system. The membrane permeate flux was increased with the increasing storage time in nitric acid solution and lowering pH of acid solution because of the enhancing of NF membrane damage by nitric acid. The membrane stability in nitric acid solution was more superior in the order of Filmtec LP-4040 < Duraslick NF-4040 < SelRO MPS-34 4040 membrane. The total rejection of Pb+2 ion was decreased with the increasing storage time in nitric acid solution and lowering the pH of acid solution. The total rejection of $Pb^{+2}$ ion after 4 months NF treatment was decreased from 95% initial value to 20% in the case of Duraslick NF-4040 membrane, from 85% initial value to 65% in the case of SelRO MPS-34 4040 membrane and from 90% initial value to 10% in the case of Filmtec LP-4040 membrane. These results showed that SelRO MPS-34 4040 NF membrane was more suitable for the treatment of an acidic etching waste solutions containing heavy metal ions.

• Journal of Gastric Cancer
• /
• v.6 no.4
• /
• pp.227-236
• /
• 2006

Purpose: Methylation of gene regulatory elements plays an important role in gene inactivation without genetic alteration. Gastric cancer is one of the tumors that exhibit a high frequency of CpG island hypermethylation. The purpose of this study was to investigate the occurrence of CpG island hypermethylation in gastric carcinoma in relation to H. pylori infection, CIMP and clincopathologic variables. Materials and Methods: We investigated the promoter methylation Status of six genes (hMLH1, p16, p14, COX-2, MGMT, E-cadherin) and CIMP in 36 gastric carcinoma tissues as well as in nontumor tissues. CIMP status was investigated by examining the methylation status of MINT 1, 2, 12, 25 and 31. The methylation status of the promoter was examined by methylation-specific PCR (MSP) and H. pylori infection was examined by histological diagnosis after staining with Warthin-Starry silver. Results: Among the 36 gastric carcinoma tissues, DNA hypermethylation was detected in the following frequencies: 14 (38.9%) for p14, 13 (36.1%) for p16, 8 (22.2%) for MGMT, 10 (27.8%) for COX-2, 21 (58.3%) for E-cadherin, and 6 (16.7%) for hMLH1. The frequencies for MINT1 and MINT25 hypermethylation were significantly higher in tumor tissues than in nontumor tissues. 16 (44.4%) of the 36 gastric carcinoma tissues were positive for the CIMP CIMP-H tumors were associated with older patients and larger tumor size than CIMP-L tumors. We found a significant association between the presence of the CIMP and hypermethylation of p16. Hypermethylation of p16 and MINT2 were significantly different when compared by age. MINT1 gene methylation was significantly associated with H. pylori infection (P=0.004). Conclusion: Our results suggest that aberrant hypermethylation of multiple tumor related genes (hMLH1, p16, p14, COX-2, MGMT, E-cadherin, MINT1, 2, 12, 25, 31) occurs frequently in gastric carcinoma tissues. The hypermethylation of MINT1 was significantly higher in the tumor tissues and was associated with H. pylori infection.

• Restorative Dentistry and Endodontics
• /
• v.36 no.4
• /
• pp.290-299
• /
• 2011

Objectives: The usage of fluoride varnish for a moderate to low caries-risk group has not been well validated. This study aimed to evaluate the preventive and therapeutic efficacies of fluoride varnish on the initiated root caries. Materials and Methods: Ten premolars were sectioned into quarters, further divided into two windows, one of which was painted with Fluor Protector (1,000 ppm fluoride, Ivoclar Vivadent). An initial lesion with a well-preserved surface layer was produced by pH cycling. Scanned line analysis using energy dispersive spectrometry determined the weight percentages of Ca and P in the demineralized layer. Scanning Electron microscopy and confocal laser scanning microscopy (CLSM) evaluated the varnish-applied root surfaces. Results: The mean lesion depth (SD) was 12.3 (2.6) ${\mu}m$ (single cycling) and 19.6 (3.8) ${\mu}m$ (double cycling). Double cycling extended the lesion depth, but induced no more mineral loss than single cycling (p < 0.05). The mean weight percentages of Ca and P between groups with and without varnish were not significantly different (p < 0.05). A CLSM showed varnish remained within 15 ${\mu}m$ of the surface layer. Conclusions: When a mild acid challenge initiated root tissue demineralization, the application of low-concentration fluoride varnish did not influence the lesion depth or the mineral composition of the subsurface lesion.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.11
• /
• pp.1213-1221
• /
• 2006

In this study, granular sludge used in an anaerobic process treating brewery waste was inoculated in a laboratory scale of reactor to induce anaerobic ammonium oxidation(ANAMMOX). The reactor was operated with synthetic wastewater, which prepared at 1:1 ratio of $NH_4^+-N$ over $NO_2^--N$. Changes in nitrogen concentration, COD, alkalinity and gas production were analyzed. There are 3 phases of spanning in experimental period according to influent nitrogen concentration. In the Phase 1, each of the concentration of $NH_4^+-N$ and $NO_2^--N$ were increased from 1.91 $gN/m^3{\cdot}d$ to 14.29 $gN/m^3{\cdot}d$. Ammonium nitrogen loading(same as nitrite nitrogen) was 23.81 $gN/m^3{\cdot}d$ in the Phase 2 and 19.05 $gN/m^3{\cdot}d$ in the Phase 3, respectively $NO_2^--N$ has been removed up to 99% during whole period while the removal efficiency of $NH_4^+-N$ was significantly varied. In Phase 2, $NH_4^+-N$ was removed up to 75%. Microorganisms varied temporally through three phases were characterized by 16s rDNA analysis methods. ANAMMOX bacteria were dominantly found in phase 2 when the removal rate of $NO_2^--N$and $NH_4^+-N$ was the highest up to 99% and 75%, respectively. Due to erroneous exposed to air, the removal efficiency of $NH_4^+-N$ was unexpectedly lowered, but ANAMMOX bacteria still existed.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.4
• /
• pp.33-44
• /
• 2005

On the basis of a stepwise and careful integration of various field and laboratory methods the analysis of groundwater flow characterization was performed with five boreholes (BH-1, -2, -3, -4, -5) on a pilot site of Natural Forest Park in Guemsan-gun, Chungcheongbook-do, Korea. The regional lineaments of NW-SE are primarily developed on the area, which results in the development of many fractures of NW-SE direction around boreholes made in the test site for the study. A series of surface geological survey, core logging, geophysical logging, tomography, tracer tests, and heat-pulse flowmeter logging were carried out to determine fracture characteristics and fracture connectivity between the boreholes. In the result of fracture connectivity analysis BH-1 the injection well has a poor connectivity with BH-2 and BH-3, whereas a good with BH-4 and BH-5. In order to analyse the hydraulic connectivity between BH-1 and BH-5, in particular, a conspicuous groundwater outflux in the depth of 12 m and influx in the depth of 65 m and 70 m, but partly in/outflux occurred in other depths in BH-5 were observed as pumping from BH-1. On the other hand, when pumping from BH-5 the strong outflux in the depths of 17 m and 70 m was occurred. The spatial connectivity between the boreholes was examined in the depth of 15 m, 67 m, and 71 m in BH-1 as well as in the depth of 15 m, 17 m, 22 m, 72 m, and 83 m in BH-5.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.1
• /
• pp.73-80
• /
• 2007

This study was carried out to separate the heavy toxic metals in eco-building materials by low-temperature pyrolysis, especially arsenic (As) compounds in CCA wood preservative as a solid in char. The pyrolysis was carried out to heat the CCA-treated Hemlock at $280^{\circ}C$, $300^{\circ}C$, $320^{\circ}C$, and $340^{\circ}C$ for 60 mins. Laboratory scale pyrolyzer composed of [preheater$\rightarrow$pyrolyzer$\rightarrow$1st water scrubber$\rightarrow$2nd bubbling flask with 1% $HNO_3$ solution$\rightarrow$vent], and was operated to absorb the volatile metal compound particulates at the primary water scrubber and the secondary nitric acid bubbling flask with cooling condenser of $4^{\circ}C$ under nitrogen stream of 20 mL/min flow rate. And the contents of copper, chromium and arsenic compounds in its pyrolysis such as carbonized CCA treated wood, 1st washing and 2nd washing liquors as well as its raw materials, were determined using ICP-AES. The results are as follows : 1. The yield of char in low-temperature pyrolysis reached about 50 percentage similar to the result of common pyrolytic process. 2. The higher the pyrolytic temperature was, the more the volatiles of CCA, and in particular, the arsenic compounds were to be further more volatile above $320^{\circ}C$, even though the more repetitive and sequential monitorings were necessary. 3. More than 85 percentage of CCA in CCA-treated wood was left in char in such low-temperature pyrolytic condition at $300^{\circ}C$. 4. Washing system for absorption of volatile CCA in this experiment required much more contacting time between volatile gases and water to prevent the loss of CCA compounds, especially the loss of arsenic compound. 5. Therefore, more complete recovery of CCA components in CCA-treated wood required the lower temperature than $320^{\circ}C$, and the longer contacting time of volatile gases and water needed the special washing and recovery system to separate the toxic and volatile arsenic compounds in vent gases.