• Wind and Structures
• /
• 제24권2호
• /
• pp.119-144
• /
• 2017

The traditional method for the simulation of high Reynolds number (Re) effects on wind loads on cooling tower models in wind tunnels focuses only on the mean wind pressure distribution. Based on observed effects of some key factors on static/dynamic flow characteristics around cooling towers, the study reported in this paper describes a comprehensive simulation method using both mean and fluctuating wind pressure distributions at high Re as simulation targets, which is indispensable for obtaining the complete full-scale wind effects in wind tunnels. After being presented in this paper using a case study, the proposed method is examined by comparing the full covariance matrices and the cross-spectral densities of the simulated cases with those of the full-scale case. Besides, the cooling tower's dynamic structural responses obtained using the simulated wind pressure fields are compared with those obtained by using the full-scale one. Through these works, the applicability and superiority of the proposed method is validated.

• Nuclear Engineering and Technology
• /
• 제41권1호
• /
• pp.1-10
• /
• 2009

The safe and reliable performance of fusion and fission plants depends on the choice of suitable materials and an assessment of long-term materials degradation. These materials are degraded by their exposure to extreme conditions; it is necessary, therefore, to address the issue of long-term damage evolution of materials under service exposure in advanced plants. The empirical approach to the study of structural materials and fuels is reaching its limit when used to define and extrapolate new materials, new environments, or new operating conditions due to a lack of knowledge of the basic principles and mechanisms present. Materials designed for future Gen IV systems require significant innovation for the new environments that the materials will be exposed to. Thus, it is a challenge to understand the materials more precisely and to go far beyond the current empirical design methodology. Breakthrough technology is being achieved with the incorporation in design codes of a fundamental understanding of the properties of materials. This paper discusses the multi-scale, multi-code computations and multi-dimensional modelling undertaken to understand the mechanical properties of these materials. Such an approach is envisaged to probe beyond currently possible approaches to become a predictive tool in estimating the mechanical properties and lifetimes of materials.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권10호
• /
• pp.3945-3964
• /
• 2015

Since the decentralized structure and the blindness of a large-scale wireless network make it difficult to collect the real-time channel state or other information from random distributed relays, a fundamental question is whether it is feasible to perform the relay selection without this knowledge. In this paper, a Slotted ALOHA based Greedy Relay Selection (SAGRS) scheme is presented. The proposed scheme allows the relays satisfying the user's minimum transmission request to compete for selection by randomly accessing the channel through the slotted ALOHA protocol without the need for the information collection procedure. Moreover, a greedy selection mechanism is introduced with which a user can wait for an even better relay when a suitable one is successfully stored. The optimal access probability of a relay is determined through the utilization of the available relay region, a geographical region consisting of all the relays that satisfy the minimum transmission demand of the user. The average number of the selection slots and the failure probability of the scheme are analyzed in this paper. By simulations, the validation and the effectiveness of the SAGRS scheme are confirmed. With a balance between the selection slots and the instantaneous rate of the selected relay, the proposed scheme outperforms other random access selection schemes.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권3호
• /
• pp.1238-1259
• /
• 2019

Saving energy is a big challenge for Wireless Sensor Networks (WSNs), which becomes even more critical in large-scale WSNs. Most energy waste is communication related, such as collision, overhearing and idle listening, so the schedule-based access which can avoid these wastes is preferred for WSNs. On the other hand, clustering technique is considered as the most promising solution for topology management in WSNs. Hence, providing interference-free clustering is vital for WSNs, especially for large-scale WSNs. However, schedule management in cluster-based networks is never a trivial work, since it requires inter-cluster cooperation. In this paper, we propose a clustering method, called Interference-Free Clustering Protocol (IFCP), to partition a WSN into interference-free clusters, making timeslot management much easier to achieve. Moreover, we model the clustering problem as a multi-objective optimization issue and use non-dominated sorting genetic algorithm II to solve it. Our proposal is finally compared with two adaptive clustering methods, HEED-CSMA and HEED-BMA, demonstrating that it achieves the good performance in terms of delay, packet delivery ratio, and energy consumption.

• Journal of Astronomy and Space Sciences
• /
• 제39권3호
• /
• pp.87-98
• /
• 2022

The Far-UltraViolet (FUV) imager onboard the Ionospheric Connection Explorer (ICON) spacecraft provides two-dimensional limb images of oxygen airglow in the nightside low-latitude ionosphere that are used to determine the oxygen ion density. As yet, no FUV limb imager has been used for climatological analyses of Equatorial Plasma Bubbles (EPBs). To examine the potential of ICON/FUV for this purpose, we statistically investigate small-scale (~180 km) fluctuations of oxygen ion density in its limb images. The seasonal-longitudinal variations of the fluctuation level reasonably conform to the EPB statistics in existing literature. To further validate the ICON/FUV data quality, we also inspect climatology of the ambient (unfiltered) nightside oxygen ion density. The ambient density exhibits (1) the well-known zonal wavenumber-4 signatures in the Equatorial Ionization Anomaly (EIA) and (2) off-equatorial enhancement above the Caribbean, both of which agree with previous studies. Merits of ICON/FUV observations over other conventional data sets are discussed in this paper. Furthermore, we suggest possible directions of future work, e.g., synergy between ICON/FUV and the Global-scale Observations of the Limb and Disk (GOLD) mission.

• 대기
• /
• 제15권2호
• /
• pp.91-99
• /
• 2005

This study compares the summer monsoon circulations during a heavy rainfall period over the Korean peninsular from 11 to 18 July 2004, simulated by three widely used regional models; WRF, MM5, and RSM. An identical model setup is carried out for all the experiments, except for the physical option differences in the RSM. The three models with a nominal resolution of about 50 km over Korea are nested by NCEP-DOE reanalysis data. Another RSM experiment with the same cumulus parameterization scheme as in the WRF and MM5 is designed to investigate the importance of the representation of subgrid-scale parameterized convection in reproducing monsoonal circulations in East Asia. All thee models are found to be capable of reproducing the general distribution of monsoonal precipitation, extending northeastward from south China across the Korean peninsula, to northern Japan. The results from the WRF and MM5 are similar in terms of accumulated precipitation, but a slightly better performance in the WRF than in the MM5. The RSM improves the bias for precipitation as compared to those from the WRF and MM5, but the pattern correlation is degraded due to overestimation of precipitation in northern China. In the comparison of simulated synoptic scale features, the RSM is found to reproduce the large-scale features well compared to the results from the MM5 and WRF. On the other hand, the simulated precipitation from the RSM with the convection scheme used in the MM5 and WRF is closer to that from the WRF and MM5 simulations, indicating the significant dependency of simulated precipitation in East Asia on the cumulus parameterization scheme.

• 한국동물위생학회지
• /
• 제32권2호
• /
• pp.171-176
• /
• 2009

Johne's disease is a chronic inflammatory bowel disease of cattle, sheep, goats and other ruminants, and Mycobacterium paratuberculosis is the etiologic agent of this disease. Many studies have been carried out on paratuberculosis from daily cattle and Korean native cattle in multiple areas around nation, but there is no report in Eastern-Gyeongbuk area. The purpose of this study is to investigate the seroprevalence of bovine paratuberculosis in Eastern-Gyeongbuk area. From July to December in 2007, blood samples were collected from 363 dairy cattle of 27 farms and 281 Korean cattle of 114 farms and the ELISA was conducted. 25 (6.9%) dairy cattle of 6 (22%) farms and 19 (6.8%) Korean cattle of 8 (7.0%) farms were positive in ELISA. In regional analysis, 25 (8.3%) out of 300 dairy cattle in Gyeungju were positive and Pohang were negative in this research. 12 (16.4%) out of 73 Korean cattle in Gyeungju and 7 (9.6%) out of 73 Korean cattle in Uljin were positive. Pohang and Youngdeok of Korean cattle were negative in this research. According to raising scale of dairy cattle, 4 (66.7%) farms out of 6 farms were raising 30 below and 2 (33.3%) farms out of were raising 30$\sim$70. And there were negative raising scale more than 70. In Korean cattle, 6 (75%) farms out of 8 were raising below 10 and 2 (25%) farms were raising 10$\sim$30. And there were negative raising scale more than 30. The rate of seropositive of paratuberculosis dairy cattle and Korean cattle were similar and the positive rate of Eastern-Gyeongbuk area is reported lower than that of any other region.

• Geomechanics and Engineering
• /
• 제14권2호
• /
• pp.107-113
• /
• 2018

Coal samples with different joints morphology were subjected to uniaxial compression experiments, cracks evolution was recorded by Nikon D5300 and acoustic emission (AE) energy signals were collected by AEwin Test for Express-8.0. During loading process, coal samples deformed elastically with no obvious cracks changes, then they expanded gradually along the trace of the original cracks, accompanied by the formation of secondary cracks, and eventually produced a large-scale fracture. It was more interesting that the failure mode of samples were all shear shape, whatever the original cracks morphology was. With cracks and damage evolution, AE energy radiated regularly. At the early loading stage, micro damage and small scale fracture events only induced a few AE events with less energy, while large scale fracture leaded to a number of AE events with more energy at the later stage. Based on the multifractal theory, the multifractal spectrum could explain AE energy signals frequency responses and the causes of AE events with load. Multifractal spectrum width (${\Delta}{\alpha}$), could reflect the differences between the large and small AE energy signals. And another parameter (${\Delta}f$) could reflect the relationship between the frequency of the least and greatest signals in the AE energy time series. This research is helpful for us to understand cracks evolution and AE energy signals causes.

• Computers and Concrete
• /
• 제24권3호
• /
• pp.207-222
• /
• 2019

This paper has presented an effective and accurate meso-scale finite element model for simulating the fracture process of concrete under compression-shear loading. In the proposed model, concrete is parted into four important phases: aggregates, cement matrix, interfacial transition zone (ITZ), and the initial defects. Aggregate particles were modelled as randomly distributed polygons with a varying size according to the sieve curve developed by Fuller and Thompson. With regard to initial defects, only voids are considered. Cohesive elements with zero thickness are inserted into the initial mesh of cement matrix and along the interface between aggregate and cement matrix to simulate the cracking process of concrete. The constitutive model provided by ABAQUS is modified based on Wang's experiment and used to describe the failure behaviour of cohesive elements. User defined programs for aggregate delivery, cohesive element insertion and modified facture constitutive model are developed based on Python language, and embedded into the commercial FEM package ABAQUS. The effectiveness and accuracy of the proposed model are firstly identified by comparing the numerical results with the experimental ones, and then it is used to investigate the effect of meso-structure on the macro behavior of concrete. The shear strength of concrete under different pressures is also involved in this study, which could provide a reference for the macroscopic simulation of concrete component under shear force.

• 대한안전경영과학회지
• /
• 제10권4호
• /
• pp.83-91
• /
• 2008

In this study, actual status of safety management for the objects of 173 university, government research institution, and corporate affiliated research center was carried out through questionnaires. For unexpected accident status according to kinds, scale, and types of laboratories, frequency analysis using cross analysis and multiple replies analysis was used. The result of this study is judged to be used for laboratory safety education prevention programs, laboratory environment improvement, investment or improvement of laboratories through the actual safety management status of laboratories such as vulnerable works for generation of unexpected sudden accidents according to kind, scale, and type of laboratories, period of occurrence, prevention education, necessity for preliminary test, and cause of laboratory accidents.