• 제목/요약/키워드: Laboratory mixing test

검색결과 155건 처리시간 0.511초

매립지에서 반응성 투수벽체의 적용성에 관한 연구 (A Study on the Application of Permeable Preactive Barriers in Landfill)

  • 천병식;박재우;도종남;박중섭;박찬수
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2006년도 춘계 학술발표회 논문집
    • /
    • pp.1126-1131
    • /
    • 2006
  • This study is part of the project that develops the permeable preactive barrier to be applied in a landfill. The geotechnical applicability of the permeable preactive barrier that filters the leachate from the landfill was evaluated. Dry specimens were made using a mixture of sand, loess and bentonite. A series of experiments are performed to determine the unconfined compressive strength and permeability of various mixing ratio of bentonite, loess, and sand. The laboratory test indicate that the optimum-mixing ratio that satisfied the regulation of unconfined compressive strength(490kPa) and coefficient of permeability$(10^{-3}\sim10^{-4}cm/s)$ of the landfill was when the ratio of sand and loess was 8:2 with bentonite content of 2%. The permeable preactive barrier is different from an impermeable barrier in that it permits a limited diffusion of the leachate, which will be directly purified biologically and chemically in the landfill.

  • PDF

실리카흄을 사용(使用)한 투수(透水)콘크리트의 강도(强度) 및 동결융해저항성(凍結融解抵抗性) (Increase of strength and freezing-thawing resistance of porous concrete by Silica-fume)

  • 홍창우
    • 자원리싸이클링
    • /
    • 제19권4호
    • /
    • pp.35-40
    • /
    • 2010
  • 최근에 들어 투수콘크리트의 동결융해에 대한 저항성이 저하되는 것과 줄눈부에서의 골재박리 등의 많은 문제점들이 대두되고 있다. 따라서 본 연구에서는 기존의 투수콘크리트의 내구성을 향상시키기 위한 방안으로 잔골재와 실리카흄, 고성능감수제를 사용하여 강도 및 내구성 증진 방안을 연구하였다. 주요실험인자로 실리카흄 혼입률 10%와 잔골재 혼입률(0%, 7%, 15%)을 선정하고, 압축강도와 휨강도, 투수계수 및 공극률, 동결융해시험을 수행하였다. 실험결과 강도측면에서는 잔골재 혼입률이 증가함에 따라 압축 및 휨강도는 증가하는 경향을 보였으나, 상대적으로 공극률 감소로 인한 투수성은 저하되고, 동결융해 저항성도 크게 감소하는 것으로 나타났다. 따라서 투수콘크리트에 있어서 강도증진을 위해 사용되는 잔골재는 혼입률 제한이 필요하며, 실리카흄 10%이상을 사용하는 것이 강도 및 내구성 측면에서 효율적인 대안이 될 수 있을 것으로 판단된다.

산업부산물을 이용한 비소성 고화제 혼합토의 역학적 특성 (Engineering Characteristics of Non-sintering Binder-stabilized Mixture using Industrial By-Products)

  • 윤대호;문경주;김윤태
    • 한국해양공학회지
    • /
    • 제28권2호
    • /
    • pp.140-146
    • /
    • 2014
  • This study investigated the engineering characteristics of non-sintering binder-stabilized mixtures consisting of different ratios of a hardening agent(3%, 6%, 9%, 12%) for recycling industrial by-products through several series of laboratory tests. The hardening agents consisted of two kinds of non-sintering binders(NSB-1, NSB-2), which were developed by using inter-chemical reactions among blast furnace slag, phospho-gypsum, and an alkali activator. In addition, ordinary Portland cement(OPC) was used to compare the engineering characteristics of the stabilized mixture. An unconfined compressive test showed that the unconfined compressive strength increased with the curing time and mixing ratio. Experimental test results indicated that the 7-day strength of the NSB-1 mixture was similar to that of the OPC mixture. However, its 28-day strength was higher than that of the OPC mixture. The secant module of elasticity showed a range of $E_{50}=(42-109)q_u$ regardless of the agents. Based on the results of triaxial tests, the cohesion and friction angle increased with the mixing ratio.

폐기물매립지 차수재로서 고화토의 중금속 고정능력 평가에 관한 연구 (A Study on the Fixation of Heavy Metals with Stabilized Soils in the Landfill Liner)

  • 노희정;이재영
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2000년도 추계학술대회
    • /
    • pp.145-149
    • /
    • 2000
  • We performed the geotechnical experiments of the hydraulic conductivity and compressive strength test with the stabilized soil in the laboratory, proved that it is useful to use the stabilized soil as an alternative for natural clay soil. Also, for mixing adding materials in the stabilized soil, it was determined that 1) the optimal mixing ratio of cement : bentonite : stabilizing agent was 90:60:1 of mass ratio(kg) for 1㎥ with soil, 2) it was also possible to use low quality bentonite(B\circled2) classified by swelling grade because of little difference from results of the hydraulic conductivity and compressive strength test with high quality bentonite(B\circled1). According to the results of the fixation ability of heavy metals(Pb$^{2+}$, Cu$^{2+}$, Cd$^{2+}$, Zn$^{2+}$) with soil and additives, authors can conclude that the higher pH condition had the more removal efficiency of heavy metals. B\circled1 and cement had especially high removal efficiency of heavy metals in a whole pH because of high alkalinity.alinity.

  • PDF

제체재료로서 국내 하상토의 현장다짐특성 (Field Compaction Characteristics of Domestic Bed Sediment as Levee Fill Material)

  • 김진만;김경민;최봉혁;이대영
    • 한국지반공학회논문집
    • /
    • 제24권10호
    • /
    • pp.113-120
    • /
    • 2008
  • 하천제방 축조를 위한 많은 양질의 성토재료는 시공헌장에서 쉽게 구하기 어려우며, 하천제방의 경제성 및 안정성에 있어서 가장 중요한 요인이라 할 수 있다. 따라서 경제적이고 안정적인 하천제방을 축조하기 위해서는 하상재료를 이용한 제방축조기술의 연구가 필수적이며 이를 위해서는 하상재료에 대하여 현장시험을 통한 설계 및 시공방법, 공학적 특성 분석이 요구되어진다. 본 연구에서는 대구 현풍천의 하상토(SP)를 대상으로 원재료 및 양질토인 화강풍화토(SW)와의 혼합에 따른 현장 다짐에 따른 공학적 특성을 평가하고 현장 혼합방법을 제시하였다.

저회와 석고를 활용한 지반함몰 긴급복구용 고유동성 채움재 연구 (Controlled Low Strength Material for Emergency Restoration Using Bottom Ash and Gypsum)

  • 이소연;윤환희;손민;공진영;정혁상
    • 한국지반신소재학회논문집
    • /
    • 제17권2호
    • /
    • pp.19-31
    • /
    • 2018
  • 최근 도시의 안전을 심각하게 저해시키는 지반함몰현상이 증가하는 추세에 있어 대책이 필요한 상황이다. 지반함몰 발생 시 긴급복구공법에 사용될 산업부산물을 활용한 뒤채움재를 개발하는 것이 본 연구의 목적이다. 이를 위해 유동성 채움재 설계기준에 의거하여 목표성능을 도출하였고, 플로우값, 일축압축강도, 초기응결시간, pH시험 등 실내시험평가를 통해 개발된 재료의 적용성을 검토하였다. 또한 현장실험을 통해 고유동성 채움재의 조기강도에 대한 성능검증과 긴급복구를 위한 시공성을 확인하였다. 평가결과 시멘트의 비율이 4% 이상일 경우 재 굴착이 가능한 장기강도보다 크게 측정되어 긴급복구목적에 적합지 않은 것으로 나타났다. 최적배합비는 저회와 석고의 비율이 약 50:50, 시멘트의 비율이 2%로 나타났다.

굴착토를 활용한 속경성 유동성 채움재의 공학적 특성 평가 (Engineering Characteristics Assessment of Rapid Set Controlled Low Strength Material for Sewer Pipe Using Excavated Soil)

  • 김영욱;이봉춘;정상화
    • 한국건설순환자원학회논문집
    • /
    • 제8권4호
    • /
    • pp.450-457
    • /
    • 2020
  • 본 연구에서는 현장 굴착토를 활용한 속경성 유동성 채움재의 배합요인별 유동성, 재료분리 저항성, 재령별 압축강도 등의 공학적 특성을 검토하여 속경성을 발현하는 배합비 및 결합재 조건을 도출하였으며, 이를 토대로 현장 모사 실험을 실시하여 현장에서 적용 가능한 후속공정 개시기 검토 방법의 유효성을 검토하고자 하였다. Kelly ball 낙하시험과 산중식 토양 경도계의 평가결과 유동성 채움재의 후속공정 개시기 확보 가능한 시간은 동일하게 약 3시간으로 나타났으며, 일축압축강도 시험의 결과와 비교하였을 때 Kelly ball 낙하 시험 및 산중식 토양경도계의 현장 적용성에 대한 유효성을 확인할 수 있었다.

심층혼합처리공법(DCM)의 설계, 시공 및 품질관리 사례 연구 (The Case Study on the Design, Construction, Quality Control of Deep Cement Mixing Method)

  • 김병일;박언상;한상재
    • 한국지반신소재학회논문집
    • /
    • 제20권4호
    • /
    • pp.19-32
    • /
    • 2021
  • 본 연구에서는 심층혼합처리공법에 관하여 저자들에 의해 수행된 국내/외 설계, 시공 및 품질관리에 대한 평가와 고찰을 수행하였고, 추후 DCM 공법의 발전을 위한 개선 사항들을 제시하였다. 본 연구 결과, 실내배합실험 시 강도에 대한 단면적 보정이 필요하고, 외삽법 적용 시 실제와 다른 결과가 도출될 수 있으므로 주의가 요구됨을 알 수 있었다. 설계 시 개량율과 개량형식 등을 모두 고려하여 적용 가능한 설계법을 선정해야 하며, 안전율이 적용된 허용압축강도는 안정성 검토를 위한 기준치를 의미하는 것이지 설계 지반정수가 아님을 확인하였다. 응력분담비의 경우 관행적인 값을 적용하기 보다는 설계 조건을 반영한 실험 및 이론적 응력분담비를 산정해야 경제적인 설계를 수행할 수 있었다. 시공 시 선천공이 예상되는 경우 증가된 함수비가 원지반 대비 크지 않은 경우 함수비 증가를 고려하지 못한 결과를 사용하여도 큰 문제가 발생하지 않는 경우도 있었다. 또한, 개량길이 대비 선단처리 길이의 비율이 높은 경우 시공 시 단위길이당 설계 시멘트량이 적게 주입될 수 있음을 확인하였다. 품질관리 시 개량체 코어링은 1축 개량체는 D/4~2D/4, 다축 개량체는 D/4 지점이 최적인 것으로 평가되었다. 품질관리를 위한 항목으로 개량체의 일축압축강도와 더불어 TCR을 고려하는 기준이 국내 실정에 더 적합할 것으로 판단된다.

동슬래그 혼합토의 기본 성질에 관한 연구 (A Study on the Fundamental Characteristics of a Copper Slag Mixed with Granite Soil)

  • 김영진;배정호;홍승서
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2000년도 가을 학술발표회 논문집
    • /
    • pp.447-454
    • /
    • 2000
  • This paper presents fundamental characteristics of a copper slag when used geotechnical materials. For this study, it was conducted laboratory tests such as compaction, large direct shear, hydraulic conductivity, leaching, TDR, frost heave test and so on. The results of laboratory tests shown gradually increase in draining capacity and shearing resistance more slag mixing. The unfrozen water in temperature changes and frost heave amounts in condition of -17 $^{\circ}C$ appeared to decrease. Also, toxicity tests based on the domestic solid waste regulations were satisfied with nonhazardous. By this research results, a copper slag mixed with granite soil may been used as granular base and embankment materials, fill etc.

  • PDF

DCM 부상토의 융기 특성에 대한 실험적 연구 (An Experimental Study on the Heave Characteristics of DCM Heaving Soil)

  • 박언상;박승도
    • 한국지반환경공학회 논문집
    • /
    • 제24권2호
    • /
    • pp.5-12
    • /
    • 2023
  • 본 연구에서는 DCM 실내 시험시공을 통해 실제 현장에서의 부상토 발생량과 부상토의 융기 특성을 정량적으로 분석하였다. 즉, DCM 공법 일련의 시공과정을 실제 현장과 근사하게 대형토조에서 재현함으로써 부상토의 발생량을 예측하고 부상토의 융기고, 확산범위, 확산각, 융기량 등의 융기 특성을 평가하였다. 실내 시험시공 결과, DCM 개량구간 내에서 상사율로 환산한 실제 융기고는 0~8.18m로 평균 3.50m로 관측되었고, 상사율로 환산한 부상토의 실제 확산범위는 개량구간 좌/우측 바깥쪽으로 28.0~38.0m 까지 분포하였다. 실내 시험시공한 결과를 SUFFER 프로그램으로 계산한 부상토의 총융기량은 19,901m3로, 주입한 물시멘트량 16,992m3와 비교하면 주입량 대비 융기량은 85.4%로 분석되었다. 또한, DCM 실내 시험시공 결과, DCM 부상토의 확산각은 개량심도 50.0m에 대하여 30.0~38.0°로 측정되어 평균 34.0°로 평가되었다. 한편, 본 연구에서 수행한 DCM 실내 시험시공과 프로그램을 이용한 분석 결과를 토대로 DCM 타설 심도 40.0m와 60.0m에서의 부상토 융기량을 예측하였다.