• 대한토목학회논문집
• /
• 제36권3호
• /
• pp.545-550
• /
• 2016

본 연구에서는 말뚝기초의 실내모형시험을 통해 연약지반상의 경량포장체용 기초로서의 적합성을 분석 및 평가를 목적으로 하고 있다. 안전성 평가를 위해 실내모형시험용 경량포장체용 말뚝기초모형을 실제 포장체 사이즈의 1/30으로 축소한 모형을 이용하여 시험을 실시하였다. 지반 조건은 연약지반을 모사하여 모델링하였고, 말뚝은 마찰군말뚝으로 실험하였다. 제한된 실험으로부터 측정된 모형포장체의 침하량은 Case A는 0.86 mm, Case B는 0.70 mm, Case C는 0.50 mm로 측정되었다. 측정된 말뚝기초 모형의 실험값을 실제 크기로 환산하였을 때의 최대침하량과 부등침하량은 각각 25.8 mm와 10.8 mm로 도로교 설계기준에 의거하여 최대부등변위량인 50 mm와 부등변위량 20 mm를 넘지 않는 것으로 보이며 침하량을 기준으로 안전성을 평가 할 경우 안전한 것으로 판정되었다.

• 한국산학기술학회논문지
• /
• 제13권4호
• /
• pp.1889-1894
• /
• 2012

바톰애쉬와 현장발생토사를 혼합한 유동성뒤채움재를 이용하여 실내모형실험을 수행하였다. 실내모형실험은 현장조건을 최대한 유사하게 모사하여 시공단계를 고려하여 실시하였다. 모형실험결과 뒤채움재 타설과정시 발생하는 최대수직변위는 4.43mm~6.6mm, 최대수평변위는 5.49mm~15.9mm로 나타났다. 하중재하시 최대 수직 변위는 2.41mm~8.69mm이고 최대 수평 변위는 3.02mm~4.25mm로 측정되었다. 하중을 제거한 후의 잔류변형은 수직방향 1.40mm~5.93mm, 수평방향 1.66mm~2.53mm로 나타났다. 동일한 크기의 하중재하시 일반모래뒤채움에 비해 유동성 뒤채움재의 수직 및 수평변위가 작게 나타났다. 유동성뒤채움의 경우 수평토압 경감효과가 크게 나타났다. 또한, 지표침하량의 경우 모래에 비해 유동성 뒤채움재에서 크게 경감되는 것으로 나타났다.

• Journal of Korean Society for Atmospheric Environment
• /
• 제17권E2호
• /
• pp.61-70
• /
• 2001

In recent years there have been growing interests in the potential environmental effects of global climate change. Of specific interests is the role that climate change may play in altering natural volatile organic compound.(NVOC) emissions from trees and the subsequent impact of this perturbation on air quality and ozone formation. A novel vegetation enclosure chamber method was designed and constructed of Tedlar in order to estimate more accurate and precise NVOC emission rates of either small whole plants or the branches of large trees. The enclosure chamber was initially tested in the laboratory and also successfully evaluated in the field. Overall precision for this enclosure was estimated as RSD<10%(n=9). The overall errors associated with the enclosure method in a laboratory system might be relatively small (say<$\pm$15%); however, they might be rather large(say$\pm$40%) in a field-based system. Two consecutive samples were collected on each sampling day from the two pine species during the test period. Slash pine studies showed that the absolute percentage difference between the first and second samples varied from 0.33 to 29%. The percent differences between consecutive emission for loblolly pines varied from 0.74 to 24.2%.

• Korean Chemical Engineering Research
• /
• 제60권4호
• /
• pp.606-612
• /
• 2022

실내 거주 시간이 늘어나면서 발생하는 CO₂를 인체에 무해한 농도인 1,000 ppmCO₂ 이하로 유지하기 위해 연구들이 활발히 진행 중이다. 본 연구에서는 저농도 CO₂흡착제로서 KOH와 K₂CO₃와 같은 알칼리성 첨가제를 상용 활성탄에 함침하여 사용하였다. 흡착된 CO₂ 양은열중량분석기(TGA)와 chamber(CO₂ IR analyzer)로평가하였다. 비표면적이 928.5 m²/g인 상용 활성탄(AC)은 KOH가 함침 된 KOH/AC(13.6 m²/g)와 K₂CO₃가 함침 된 K₂CO₃/AC(288.8 m²/g)보다 비표면적이 높았다. 챔버실험결과, AC는 CO₂를 거의 흡착하지 않았지만, KOH/AC와 K₂CO₃/AC는 각각 93.5 mg_CO2/g_sample 및 94.5 mg_CO2/g_sample 흡착하였다. 이것은 비표면적 및 미세기공의 부피에 의한 물리적인 흡착 영향보다 알칼리성 활성점의 증가가 CO₂ 흡착에 더 유리하게 작용한 것으로 판단된다. KOH/AC와 K₂CO₃/AC의 재생성능은 chamber test 결과 대조군(K₂CO₃/Al+Si supports)과 비교했을 때 안정적으로 흡착 성능을 유지하는 것으로 나타났다(3회 반복 실험). 또한, KOH/AC와 K₂CO₃/AC는열중량분석기의절대습도 1%H₂O를고려한조건에서 145.7 mg_CO2/g_sample및 150 mg_CO2/g_sample로 나타났다. 따라서 KOH 및 K₂CO₃ 등과 같은 알칼리 성분의 함침은 상용 활성탄의 안정적인 흡착 및 재생 후 흡착성능을 나타내어, 실내 이산화탄소 저감을 위한 흡착제 개발에 적용될 수 있을 것으로 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• 제35권5호
• /
• pp.24-37
• /
• 2007

The Korean Ministry of Environment started controlling indoor air quality (IAQ) in 2004 through the introduction of a law regulating the use of pollutant emitting building materials. The use of materials with formaldehyde emission levels above $1.25 mg/m^2{\cdot}h$ (JIS A 1901, small chamber method) has been prohibited. This level is equivalent to the $E_2$ grade ($>5.0mg/{\ell}$) of the desiccator method (JIS A 1460). However, the $20{\ell}$ small chamber method requires a 7-day test time to obtain the formaldehyde and volatile organic compound (VOC) emission results from solid building interior materials. As a approach to significantly reduce the test time, the field and laboratory emission cell (FLEC) has been proposed in Europe with a total test time less than one hour. This paper assesses the reproducibility of testing formaldehyde and TVOC emissions from wood-based composites such as medium density fiberboard (MDF), laminate flooring, and engineered flooring using three methods: desiccator, perforator and FLEC. According to the desiccator and perforator standards, the formaldehyde emission level of each flooring was ${\le}E_1$ grade. The formaldehyde emission of MDF was $3.48 mg/{\ell}$ by the desiccator method and 8.57 g/100 g by the perforator method. To determine the formaldehyde emission, the peak areas of each wood-based composite were calculated from aldehyde chromatograms obtained using the FLEC method. Formaldehyde, acetaldehyde, propionaldehyde, butyraldehyde and benzaldehyde were detected as aldehyde compounds. The experimental results indicated that MDF emitted chloroform, benzene, trichloroethylene, toluene, ethylbenzene, m,p-xy-lene, styrene, and o-xylene. MDF emitted significantly greater amounts of VOCs than the floorings did.

• 한국지반공학회논문집
• /
• 제25권11호
• /
• pp.117-130
• /
• 2009

본 논문에서는 순환골재 다공질 콘크리트말뚝(Recycled-Aggregate Porous Concrete Pile, RAPP)에 의한 지반개량효과를 파악하기 위하여 기존에 수행된 실내모형실험(유승경 등, 2008(a)) 결과를 분석하였다. 본 연구에서 얻어진 실험 결과를 동일한 조건에서 수행한 SCP 실험 결과와 비교하여 RAPP로 개량된 복합지반의 침하량과 과잉간극수압 및 연직응력증분의 시간에 따른 변화 특성과 복합지반의 거동 특성을 비교, 분석하였다. 또한, 수치해석을 통하여 실내모형실험 결과를 평가하였다. 그 결과, RAPP로 개량된 복합지반에서 하중재하시 응력분담이 뚜렷이 발생하여 침하저감 효과가 크게 얻어졌다. 또한, 복합지반의 압밀도를 산정하여 분석한 결과, RAPP는 배수재로서의 기능을 충분히 발휘하여 압밀촉진 효과가 있음을 확인할 수 있었다.

• Journal of Biosystems Engineering
• /
• 제8권2호
• /
• pp.62-68
• /
• 1983

This study was to examine the drying characteristics of barley and the effect of moisture content of barley on milling performance. A barley variety, Jogang, having 35.0% of initial moisture content was used for this experiment. Thermo-hydrostatic dryer which consists of blower, condensor, heater, humidifier, drying chamber and control box, etc., was used for the drying experiment. The change in the weight of a barley sample was continuously measured by means of the ring type load cell installed inside the drying chamber. Milling test runs the samples having the predetermined moisture content were taken from each drying test run. A laboratory type barley miller was used for the milling test. The results of the study are summarized as follows: 1. The drying constants (k) applied for the thin layer drying model, (M-Me)/(Mo-Me) = $Ae^{-kt}$ were 0.155, 0.259 and 0.548, respectively, at the three levels of drying temperatures, $40^{\circ}C$, $50^{\circ}C$ and $60^{\circ}C$. The drying constants complied with the Arrhenius Equation, K = Ko exp (-C/T), were determined as $Ko=1.901455{\times}10^8$ and C = 6563. 2. The laboratory milling test indicated that the highest milled and head barley recovery was resulted from the sample which was dryed at $40^{\circ}C$. In general, the increase in the drying temperature from $40^{\circ}C$ to $60^{\circ}C$ indicated a negative effect on milling yields. 3. Also, the sample having 15% M.C. presented the highest milled and head barley recovery among the five moisture content levels (12, 15, 18,21 and 24%).

• 한국전산유체공학회지
• /
• 제13권4호
• /
• pp.24-32
• /
• 2008

Environmental test is divided into operation test and storage test. The temperature of storage test is induced temperature which is considered with all sort of the heat source. Induced temperature is the temperature to be adapted to each item and platform and can be induced by computer simulation, laboratory, and real field test. We considered the induced temperature to be associated with solar heat source. In this research. First, we compared the induced temperature which be occurred by one experiment for thin plate in solar test chamber with the other one which be occurred by computer simulation to be SolidWorks 2007 COSMOS FloWorks. After this verification, we showed induced temperature which can be occurred when the test item is stored. Especially, we bring out the induced temperature by applying the ambient temperatures which is presented by MIL-STD-810F and brought out in preceding research.

• ETRI Journal
• /
• 제31권4호
• /
• pp.376-386
• /
• 2009

An active radio frequency identification (RFID) system has the advantages of a long identification distance and a good identification rate, overcoming passive RFID drawbacks. Therefore, interest in the development of active RFID systems has been gradually increasing in areas of harbor logistics and national defense. However, some identification failures between active RFID systems developed under the same standards have been reported, presumably due to a lack of development of accurate evaluation methods and test equipment. We present a realization of the hardware and software of an emulator to evaluate the standard conformance of an active RFID system in a fully anechoic chamber. The performance levels of the designed emulator are analyzed using Matlab/Simulink simulations, and the applicability of the emulator is verified by evaluating the standard conformance of a real active RFID tag. Finally, we propose a new evaluation method by incorporating a self-running test mode environment into the RFID tags to reduce testing time and increase testing accuracy. The application of the suggested method to actual tags improves measurement uncertainty by 0.56 dB over that obtained using existing methods.

• 한국전산구조공학회논문집
• /
• 제16권3호
• /
• pp.219-228
• /
• 2003

강관이 매설되어 있는 폐쇄형 시스템에서 동결된 화강토의 온도분포에 관한 수치해석 및 실험적 연구가 수행되었다. 실험을 통해 측정된 부동수분량의 온도상관식을 제시하였으며, Lachenbruch의 열전도율 식을 사용하여 열전도율 측정값을 비교·분석하였다. 원형 단면 강관이 매설된 모형토조의 동결챔버를 제작하여 동결토의 온도를 측정하고 유한요소 수치해석을 수행하여 실험 결과와 비교하였다. 수치해석시 동결된 화강토의 잠열효과가 고려되었다.