• Journal of the Earthquake Engineering Society of Korea
• /
• v.15 no.6
• /
• pp.55-66
• /
• 2011

The purpose of this study was to develop an efficient process in the design and construction of a 1:5 scale 10-story R.C. apartment building model for an earthquake simulation test. The reduction ratio of the specimen was determined by the size ($5m{\times}5m$) and pay load (600kN) of the available shaking table and the availability of model reinforcements. For efficiency and quality control of the reinforcement work, prefabrication was used. Construction was conducted in two steps, the wall in one step, and another step for the slab, because it was impossible to remove the formwork of a wall if the walls and slabs in a story were constructed in one step. The slip form construction method was used repetitively for walls. The formwork of a wall was made with veneer and acryl plate on each side, so it was possible to check the quality of the concrete placing. To construct this model, it took roughly six months with five full-time research assistants, for a total of 602 man days of labor in construction.

• Journal of Plant Biotechnology
• /
• v.40 no.1
• /
• pp.37-42
• /
• 2013

Rice is one of the most important cereal crops as a model plant for functional genomics of monocotyledons and usually transformed using Agrobacterium tumefaciens. However, the transformation's process using previous method is still time consuming and uneconomical, low efficiency. In this study, we established a new method by modifying the general Agrobacterium protocol especially in the infection and co-cultivation, Agrobacterium elimination, infected calli's selection steps using liquid media. We directly inoculated Agrobacterium containing a ZjLsL gene under the control of constitutive promoter into the 1- to 3-week-old rice calli derived from mature seeds. After 3 days of co-cultivation, the infected calli were transferred onto liquid media of Agrobacterium elimination and calli's selection for 3 days. The calli were transferred to calli's growth solid media for 14 days and then the calli transferred to shoot induction and root induction media. Putative transformants were initially selected on the medium containing phosphinothricin, and the PAT protein verified by PAT strip test. This method in this study would lead to reduction of substantial labor and time to generate transgenic plants.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.37-43
• /
• 2019

Since 3D printed concrete can be constructed without formwork, it is easy to construct an atypical structure, and the construction time and labor cost can be reduced. However, since the construction is exposed to the outside, shrinkage cracking due to moisture loss inside and outside the concrete occurs. Therefore, in order to improve the durability of the 3D printed concrete, a shrinkage reduction plan of the 3D printed concrete is required. In this study, glycol-based and alcohol-based shrinkage reducing agents were fabricated and evaluated for their performance. The shrinkage reducing agent samples showing excellent performance were selected and applied to 3D printed concrete. As a result, the compressive strength was increased by more than 10% and the shrinkage was reduced by more than 36% when using a shrinkage reducing agent. It is expected that the production of high quality 3D printed concrete will be possible because it is possible to increase the compressive strength and reduce the amount of dry shrinkage by applying a shrinkage reducing agent for 3D printed concrete.

• Weed & Turfgrass Science
• /
• v.2 no.3
• /
• pp.236-241
• /
• 2013

Introduction of rye living mulch in soybean production is important for labor-saving and reduction of herbicide usage for weeding by weed suppression and for soil conservation by mulching of rye. Soybean and rye were row-planted and broadcasted simultaneously at different planting times (May 15, May 25, June 5) and row widths (35 and 70 cm) in 2010, different soybean cultivars (Daepoong, Singi) and planting times (May 15 and June 1) in 2011, respectively, and investigated weed occurrence, early growth and yield of soybean. Acalypha australis, which is known to herbicide-resistant weed, could be controlled ecologically by rye living mulch. Occurrence of Acalypha australis was controlled effectively also by mixture of alachlor and linulon at no mulch in 2011. Early growth amount of soybean plant per area was increased by narrow row width (35 cm) at rye living mulch, which was helpful in the control of weeds, but grain yield of soybean with narrow row was decreased compared to conventional row width (70 cm) at the planting in early June. It is concluded that soybean planting as row width 70 cm in early June is proper at simultaneous planting with rye.

• The Journal of the Korean Society for Microbiology
• /
• v.3 no.1
• /
• pp.15-23
• /
• 1968

For the effective control of Syphilis, many investigators have developed a more rapid, simple and economical screening serological test which is adequately sensitive and specific. To fulfill the requirements of a more rapid serologic test for syphlis, a substitute for the conventional serum specimen was needed since considerable time and labor are involved in the processing of blood to serum. Burdon suggested the use of plasma in the serologic tests for syphilis as a substitute for serum. He noticed that plasma was more sensitive than serum in the Kline and Kahn tests, and attributed this to the presence of more antibody-like substance, "reagin" in plasma than in serum. However, to make plasma sufficiently sensitive, it was necessary to inactivate plasma by heating at a temperature of $56^{\circ}C$ for about 30 minutes. Heating of plasma resulted in the precipitation of fibrinogen which made centrifugation necessary to obtain dear plasma. Since the chief disadvantage to the use of unheated plasma(or serum) was a reduction in sensitivity of results-which probably was due to a labile factor such as complement-Portnoy et al began to consider rapid chemical methods of inactivation of plasma(or serum). They experienced that choline chloirde was shown to be anticomplementary which suggested its use as an inactivating agent for unheated plasma(or serum). In 1959 Portnoy et al reported the Rapid Plasma Reagin(RPR) Test for syphilis which is a more rapid, economical and simple. But still this test has many disadvantages as a rapid performing, field and office procedure, because it requires the usual laboratory equipments such as centrifuge, rotating machine, microscope etc. To substitute these disadvantages of the RPR test, in 1962, Portnoy et al developed the Rapid Plasma Reagin(RPR) card test for syphilis, which has the following advantages: a) Simplicity and rapidity of performance, b) Requires no laboratory equipments, c) Stable antigen suspension, d) Adequate sensitivity and specificity. This RPR card test can be used as a rapidly performing and screening test in field investigation, outpatient clinics, small laboratories and hospitals doing limited syphilis serology, and predonor in blood bank. Private clinic which has limited laboratory equipment and technic for syphilis serology can also use this RPR card test as a tool in the rapid diagnosis of syphilis. It was thought that this RPR card test is a useful tool in Korea for private physician and mass survey for syphilis diagnosis. But Portnoy patented the reagents needed for the performing the RPR card test. Therefore authors developed newly the reagents and according to Portnoy's method evaluated the newly developed. RPR card test compared with the VDRL, Kolmer CF, and RPCF tests. The RPR card and VDRL tests were performed plasma and serum from the total 1,132 cases. Among these 1,131 cases, 521 were syphilis suspected laboratory specimens, and 611 were syphilis unsuspected healthy young men. After screening with these two tests, the RPR card and VDRL tests, reactive specimens to the above one or both tests were retested by the Kolmer CF and RPCF tests.

• Applied Biological Chemistry
• /
• v.20 no.1
• /
• pp.95-100
• /
• 1977

To get a basic information for improving Korean's pattern of comsuming red pepper and the possibility of its industrial production, consumer's ways of red pepper processing and his present dietary habits were surveyed and the results are follows; (1) Korean's daily consumption of red pepper was on the average 9.2 g on the basis of the whole dried red pepper. (2) The tendency of evading the home drying method was increased; 72.22% in urban community and 50.4% in rural community purchased the dried red pepper in the lump yearly. The household purchasing the fresh red pepper and using the home drying was 27.8% in urban community and 49.6% in rural community, so one third of urban household was still using the home drying method. The case of dependence on tine drying factory was no more than 2.6%. (3) Drying method was mainly sun drying which done on the poor circumstance like as the street side without the proper equipment of drying. Home process of red pepper by housewife was 70.8%, and the old, housekeeper were only 7.3% respectively. (4) The hygienic sense in the drying was rare; 68.8% was not washed and 51.9% of decayed red pepper was eaten. (5) Koreans prefered the strong pungency, deep red color and fine powder form. (6) While the 45.5% of seed was collected by second hand dealer and made use of as resources of edible oil, it was not used effectively due to complexity of its collection system. (7) While 40.1% desired the improvement of red pepper dietary life, 41.1% distrusted the present commercial red pepper powder on the market. From the results above, we conclude the fact many households have still hygienically poor red pepper processed at home, in spite of the red pepper is one of the most important spices in Korea. Considering the growing urban population, reduction of unemployed labor due to the increasing nuclear family and hygienic problems caused by the serious pollution, the improvement of red pepper processing method is urgently required. And it is believed that red pepper has a good prospect to be processed on the industrial scale in Korea.

• Journal of the Korea Safety Management & Science
• /
• v.21 no.4
• /
• pp.75-80
• /
• 2019

Sales of the Korean clothing industry grew to 16.9 percent on-year in 2010, but the growth rate dropped to 3 percent from 2011 to 2016 and the overall market began to slump to 1.1.6 percent in 2017. The competitiveness of clothing companies is also a major sector in logistics capability, and the average logistics cost of domestic clothing companies is 8.3 percent of sales in 2011, higher than the average 8 percent of domestic industries, and 36.4 percent of the total storage cost in 2011, higher than the 28.8 percent share of the total storage cost of domestic companies. As domestic production conditions such as wage hikes and labor disputes worsened in the 1990s, production facilities were rapidly moved overseas, which led many clothing companies to have no production facilities or a minimal production base in Korea and focus on marketing and design capabilities. The total storage capacity and storage efficiency of the logistics center became very important as the products were changed to the form of mass warehousing and small-volume forwarding. Research shows that building column spacing, a model of this research, can affect the amount of hanger rack storage empirically, so for sustainable growth of clothing companies, it is necessary to improve competitiveness in the logistics market by reducing costs and improving efficiency to overcome difficulties in corporate management. Because logistics costs are 8.3 percent and operating profit to sales ratio is 2 percent, it is expected that operating profit will increase by 41.5 percent if logistics costs are reduced by 10 percent. If 10% of storage cost is saved based on storage cost, operating profit is expected to increase by 15% To strengthen the competitiveness of the clothing industry, a reduction in logistics costs is essential. Therefore, the purpose of this study is to provide hints that logistics experts can have empirically small amounts in reducing storage costs through column spacing adjustment of logistics centers that have not been dealt with statistically until now, and to contribute to the continued growth of clothing companies and the development of the domestic logistics industry.

• Journal of Digital Convergence
• /
• v.10 no.11
• /
• pp.93-102
• /
• 2012

The purpose of this research is to create a preferable corporate culture under the SmartWork environment. There is growing interests in SmartWork, which can satisfy the compatible conditions of government's carbon emission restriction policy, corporate efficient expense reduction, productivity maximization, and each individual's work and a family. Due to the interests and the rapid development of IT technology, a realistic condition for SmartWork is established but the promotion without a sufficient preparation, such as legal examination and relevant systems, created much confusion and very few companies are introducing it. This paper discusses that a social agreement should be reached through adjustments among parties interested, such as government, companies, and employees, studies the WIN-WIN plan that individuals and organization can grow together, and proposes a new corporate culture under the SmartWork environment. SmartWork has more than the simple meaning of 'remote working'. SmartWork, a method of smart working, means a transition to a new paradigm that minimizes moving for work and work & human move together, and a change from a work-oriented culture to a human-oriented culture. This paper summarized the role of government and companies for the successful introduction of SmartWork, and proposed that a government level 'SmartWork Activation Executive Committee (tentative name)' with a strong promotional power would create a new culture of SmartWork and form a civilian consultative body to support SmartWork corporate culture creation & expansion in the private corporate area, in a tuning with Ministry of Public Administration & Security, Ministry of Labor, Ministry of Gender, and Communications Commission.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.5
• /
• pp.108-119
• /
• 2016

Since the introduction of the converted accident rate in Pre-Qualification(PQ) process in 1992, the safety evaluation system has contributed to a reduction of construction accidents and development of the safety management system in public construction projects. As the comprehensive evaluation method the government plans to introduce includes the indicators 'accident rate' and 'death rate per 10,000 workers', the influences on the safety evaluation in the bidding process would be broader in public sector construction projects. However, the current safety evaluation system is operated by different estimating standards in the bidding process. At this point, a study of improvement on the safety evaluation index is required to review its current conditions and to propose its efficient operating method. Therefore, the purpose of this study is to analyze problems of the current safety evaluation system through the questionnaire survey on the qualified workers in construction safety management and to propose an improvement plan for the problems noticed. Our results suggest the standards of the unified process for the safety evaluation index, the size of construction firms needed for accident rate estimation, and the improvement plan for unreported accidents. The proposed improvement plan enables the reasonable estimation and efficient operation of the safety evaluation index, and further, it would contribute to reducing construction accidents through the activation of voluntary safety management by construction firms.

• Journal of the Ergonomics Society of Korea
• /
• v.27 no.4
• /
• pp.27-35
• /
• 2008

Recently, many studies have reported the fact that an excessively accumulated psychological and physical burden induced from physical labor conducted routinely in home and industry can be one of main reasons of musculoskeletal disorders in the working population. This fact makes increase interests in studies to reduce a risk of musculoskeletal disorders through grafting ergonomic considerations on working environment. However, there are currently limited methodologies in quantitative evaluations of new ergonomic suggestions to reduce a risk of musculoskeletal disorders. The current study is therefore performed to evaluate quantitatively effects of a design of washing machine as a new ergonomic suggestion onto prevention of musculoskeletal disorders, through application of a biomechanical evaluation methodology. For this, three-dimensional motion analysis by using musculoskeletal models with Rapid Entire Body Assessment (REBA), which has been generally used for a simple evaluation of a degree of harmfulness of the human body at specific working postures to be considered, was performed. The results of REBA did not give us enough information and their results were somewhat simple and inaccurate, but the results of the three-dimensional motion analysis give us enough information such as alteration of main muscle forces and joint moments required during washing work. All results showed that the main muscle strengths and joint moments were decreased effectively for reduction of a risk of musculoskeletal disorders during the washing work with newly designed washing machine evaluated in the current study, compared with those generated during the washing work with general washing machine. From these results, it can be concluded that a risk of the musculoskeletal disorders, which may be induced by a repetitive washing work, may be reduced through using the washing machine designed ergonomically and newly. Also, it is thought that if our ergonomic design can be applied for improvement of working environment in lifting and laying works conducted repeatedly for a treatment work of goods, which have a strong resemblance to the behaviors generated frequently during the washing work, a possibility of occurrence of the musculoskeletal disorders by the lifting and laying works may be reduced highly.