• Environmental and Resource Economics Review
• /
• v.20 no.3
• /
• pp.419-457
• /
• 2011

This study aims at understanding the characteristics of global economic models, which are widely used for climate change policy analysis. A literature review study was conducted in order to derive general features of top-down models such as CGE and bottom-up/hybrid models such as GTEM. Furthermore, a structural analysis was carried out by applying parameter and structural components from other models to a particular model to observe the potential differences in outcomes. Literature review shows that bottom-up or hybrid models generally have higher level of reduction potentials than top-down models in the long run. This contradicts the conclusion presented by IPCC, and raises the need for more rigorous investigation through structural analysis. Structural analysis of EPPA model indicates that the structural component of the energy sector in a particular model is the most influential factor in predicting baseline emissions and reduction potentials. This includes the structure among energy, capital, and labor inputs, and the substitution elasticities within the energy bundle. Technology bundle can establish the conclusions from literature review, and change in Armington elasticities do not significantly affect the outcome in aggregate.

• Journal of Engineering Education Research
• /
• v.18 no.1
• /
• pp.20-30
• /
• 2015

The recent increase of wages is considered to be the result of lawsuits on ordinary wage expansion and the reduction of working hours. This may enlarge the wage gap between enterprise and small business, and thus worsen the insufficient supply of workforce to small businesses. Therefore, it is necessary to provide strategies to control the increase of wages in order to resolve the difficulty in the industrial workforce supply and to enforce the industrial competitiveness.

• Journal of the Korean Society of Safety
• /
• v.9 no.4
• /
• pp.3-10
• /
• 1994

This study examines fracture characteristics of wire rope of 6$\times$37+FC 14mm B degree, Which has been widely used for the strength support for machinery, cranes and shipping. The examination Is based on the fellowing experimental conditions. Firstly, this study analyzes the effect of the strength of wlre rope. When number of broken wires is occuring at the level of 5%, 10% and 15% degree respectively in the following two cases：1) Case of broken down to each strand equally. 2) Case of broken down to one strand only. Secondly, this study analyzes the effect of corrosion on the strength of wire rope. Corrosion times are 72hours, 144hours and 216hours corrosion respectively under following conditions. 1) Case of only a corrosion without wire breaking. 2) Case of corrosion after 5% degree wire breaking to each strand equally. Some outcomes of these experiment are as follows. 1) From the of tension test, We can find that the ratio of strength reduction case of wire broke down to one strand concentrically is greater than that ratio case of broke down to each strand equally. 2) From the corrosion test, We can also find that the ratio of strength reduction case of corroded after 5% degree wire breaking to each strand equally Is greater than that ratio case of corroded without wire breaking. 3) After comparing theoretical fracture load of wires with experimental fracture load of wires, we can find the fracture load of the case of broken down to each strand equally is most similar to theoretical fracture load. 4) It is proposed that safety rules on wire rope in the Industrial safety and healthy labor of law have to change “breaking over 10% of number of wires in one strand of wire rope(excluded filler wire )”has to be replaced by“breaking over 10% of number of all wires in all strand of wire rope(excluded filler wire)”

• Journal of Digital Convergence
• /
• v.9 no.6
• /
• pp.295-311
• /
• 2011

The government is working out the development of a venture enterprise through a venture certification system. The broad effects of its policies are anticipated by the government and revealed in the 'The Survey on Actual Condition of Venture Enterprises 2010'. These benefits include the revitalization of start-up, promotion of technological innovation, progress in marketing ability, improvement in corporate image, financing and investment, and benefit from tax reduction & exemption. However, with the estimation of production function and sales function, which both uses capital and labor as a basic elements, it was found that only 'financing and ease of investment' produces a statistically significant effect on production and sales. An addition, this study looks into whether venture-supporting system are helpful to the eradication of technical inefficiency. The policies brought about positive changes in reduction of technical inefficiencies except with regard to the ease of start-up where it was found that an increase in inefficiencies was the result.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.1001-1004
• /
• 2008

This study reviewed the results of utilization of insulation heat curing method using double layer bubble sheet in slab concrete and mass concrete in cold weather environment. First of all, when double layer bubble sheets are applied, it was shown that slab concrete was protected from early freezing by remaining between 6 and $10^{\circ}C$ even in case outside temperature drops $10^{\circ}C$ below zero until the 2nd day from piling, and in the case of mass concrete, with the maximum temperature difference between the center and surface less than $6^{\circ}C$, crack occurrence index was close to 2 and no hydration heat crack occurred by internal constraint. The insulation heat preservation curing method using the double bubble sheet applied in this field prevented early freezing owing to stable curing temperature management, deterring concrete strength development delay at low temperature, and obtained the needed strength. Also, it was proven that the method is highly effective and economic for cold weather concrete quality maintenance through curing cost reduction like construction period shortening and labor cost reduction, etc by reducing the process of temporary equipment installation and disassembling.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.5
• /
• pp.459-469
• /
• 2020

The purpose of this study is to secure the same or more structural performance and constructability for the detail off hooks cross-constructed at 135° used as external-ties standard detail in reinforced concrete columns, therefore, to the purpose of improving constructability, The clip-type binding implement was suggested. the experiment on the constructability evaluation and cost analysis of the clip-type binding implement by 90° end-hooked transverse reinforcement in reinforced conrete columns was carried out. The results of the analysis confirmed that standard detail column took about an one hour regardless of the diameter of tie. When using the clip-type binding implement, It was reduced to about 50% of the standard detail column. and regardless of the building size, it was most effective for the cost down when using the clip-type binding implement 1ea, it was about 32% fo labor cost reduction effect in comparison with using standard detail. as a result, Using the clip-type binding implement is shown be very effective in the working time and construction cost reduction.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1081-1089
• /
• 2013

The purpose of this paper is to suggest the formation plan of green cluster for the enhancement of green industry competitiveness in Korea. For this reason, this paper has the analysis to find out regional competitiveness and effective factors in the green industry. The major findings are as follows. First, the renewable energy industry was competitive at Gyeonggi, Gyeongnam, Chungbuk, Chungnam, Ulsan, Jeonnam, and the carbon reduction industry was competitive at Ulsan, Gyeonggi, Gyeongbuk,, Chungnam, Seoul, Chungbuk, Inchon. Second, the most important factors of the renewable energy industry was factor condition, such as business, labor, research and development; while in the carbon reduction industry was sector of structure and rivalry, such as performance, policy and institution, market share, industry specialization. Third, it showed that the green industry was more competitive at the local area with the better industrial infrastructure. So, we need to focus on the green of existing industry-infrastructure, and the strategy of selection and concentration, for the enhancement of green industry competitiveness in Korea.

• 사회경제평론
• /
• v.31 no.2
• /
• pp.105-126
• /
• 2018

In this paper, I makes some critical comments on the temporal single-system interpretation (TSSI) of Marxian value theory. The first concerns the claim that the Fundamental Marxian Theorem (FMT) holds within the TSSI under completely general conditions. Based on the idea that the nominal profit does not well fit the FMT, the TSSI proponents suggest that more relevant for proving the TSSI FMT is the real profit, defined by deflating the output prices. In contrast, I propose a more general approach where three possible concepts of profit are all considered, in which case the result is that whether the FMT holds within the TSSI is indeterminate. Second, the refutation of the Okishio theorem presented in Kliman (1996) is critically examined, focusing on the criticism raised in the literature that the Kliman model ignores the cost-reduction criterion as for the technical change and therefore cannot be considered as an internal refutation of the Okishio theorem. Drawing upon the criticism, I explicitly incorporate the cost-reduction criterion into the Kliman model and show that the continuous labor-saving technical change of the Kliman model is not necessarily cost-reducing and under certain conditions is cost-neutral or cost-raising.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.6
• /
• pp.1373-1378
• /
• 2018

In order to solve the problems such as reduction of agriculture population, aging and declining of grain self sufficiency rate, agriculture ICT convergence technology utilizing IoT technology is actively being developed. Agricultural ICT technology only concentrates on facility houses, and there is no automated control system in the field of cultivation. In this paper, we propose an irrigation control system that automatically controls the solenoid valves and water pumps in a large area with Lora wireless communication. The proposed system does not require a separate power source by using a small solar panel, and it is very convenient to install and operate supporting wireless auto setup by plug-and-play method. Therefore, it is expected that it will contribute to the reduction of labor force, quality of agricultural products, and productivity improvement.

• Korean Journal of Labor Studies
• /
• v.23 no.2
• /
• pp.47-77
• /
• 2017

This paper analyzes the changes in wage inequality and its contributing factors since the mid-2000s. Although trends vary by data and wage indices, the Gini coefficient of the total wage of all workers shows an increasing trend due to the part-time increase of less than 35 hours per week, while the wage Gini coefficient of hourly wages and the total wage Gini coefficient of full-time workers showed a declining trend. Part-time increases have increased inequality based on total wages, but part-time hourly wage increases can be considered to have reduced hourly wage inequality. Therefore, as a result of decomposing the factor of Gini coefficient reduction only for full-time workers, factors that contributed absolutely to inequality reduction were variables such as job tenure, career, and occupation, and employment type variable has little effects, and the establishment size variable deepens inequality. The variables such as industry, age, and education did not contribute significantly to the inequality change. This is attributed to the decline in wage premiums for job tenure and management and professional jobs and the increase in wage premiums for large-scale businesses.