• Asian Journal of Turfgrass Science
• /
• v.23 no.2
• /
• pp.229-240
• /
• 2009

The high temperature and water content in soil profile probably affect the physiological disorder especially on cool-season turfgrasses in warm and humid weather of Korean summer. The purpose of this research was to analyze the effect of soil temperature and water content on the growth and stress response of creeping bentgrass(Agrostis palustris Huds.) under a humid and warm temperature. USGA(United State of Golf Association) green profile in laboratory test, Daily temperature changes were tested under a dried sand, 70% water content of field capacity, and saturated condition at $34^{\circ}C$ of the USGA green in lab. In this test, the dried sand reached to $80^{\circ}C$, however, the surface temperature decrease of $10^{\circ}C$ on the saturated condition. In the thermal properties test in field, thermal conductivity, thermal diffusivity, and soil temperature were increased followed by irrigation practise. In the water-deficient condition, the highest soil temperature was reached temporally right after irrigation, however, the excessive soil water content higher than field water holding capacity showed the highest soil temperature after a while. This result indicated that a heat damage to root system was caused from the thermal conductivity of a high surface soil temperature. The excessive irrigation when a high turf surface temperature should occur a negative result on tufgrass growth, moreover, it would be fatal to root growth of creeping bentgrass, especially when associated with a poor draining system on USGA sand green. Overall, this study shows that high soil temperature with water-excessive condition negatively affects on cool-season grass during the summer season, suggesting that excessive irrigation, over 70% field capacity of soil condition, does not help to reduce soil temperature for summer season in Korea. In the study that cool-season grass were treated with different water content of soil, The soil had higher temperature and more water holding capacity when treatment rate of soil conditioner was increased. The best growth at the normal water condition and the worst state of growth at thee water-excessive condition were observed.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.31 no.4 s.54
• /
• pp.289-293
• /
• 2005

Nowadays there are many sun protection cosmetics including organic or inorganic UV filter as an active ingredient. Chemically stable inorganic sunsEreen agents, usually metal oxides, we widely employed in high SPF products. Titanium dioxide is one of the most frequently used inorganic UV filters. It has been used as pigments for a long period of cosmetic history. With the development of micronization techniques, it becomes possible to incorporate titanium dioxide in sunscreen formulations without whitening effect and it becomes an important research topic. However, there are very few works related to quantitations of titanium dioxide in sunscreen products. In this research, we analyzed amounts of titanium dioxide in sunscreen cosmetics by adapting redof titration, reduction of Ti(IV) to Ti(III) and reoxidation to Ti(IV). After calcification of other organic ingredients of cosmetics, titanium dioxide is dissolved by hot sulfuric acid. The dissolved Ti(IV) is reduced to the Ti(III) by adding aluminum metals. The reduced Ti(III) is titrated against a standard oxidizing agent, Fe(III) (ammonium iron(III) sulfate), with potassium thiocyanate as an indicator In order to test accuracy and applicability of the proposed method, we analyzed the amounts of titanium dioxide in four types of sunscreen cosmetics, such as cream, make-up base, foundation and powder, after adding known amounts of titanium dioxide $(1{\sim}25w/w%)$. The percent recoveries of the titanium dioxide in four types of formulations were in the range between 96 and 105%. We also analyzed 7 commercial cosmetic products labeled titanium dioxide as an ingredient and compared the results with those of obtained from ICP-AES (Inductively Coupled Plasma-Atomic Emission Spectrometry), one of the most powerful atomic analysis techniques. The results showed that the titrated amounts were well coincided with the analyzed amounts of titanium dioxide by ICP-AES. Although instrumental analytical methods, ICP-MS (Inductively Coupled Plasma-Mass Spectrometry) and ICP-AES, are the best for the analysis of titanium, it is hard to adopt because of their high prices for small cosmetic companies. It was found that the volumetric method presented here gat e quantitative and reliable results with routine lab-wares and chemicals.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.5
• /
• pp.734-744
• /
• 2011

A soil stabilization method is an effective and practical remediation alternative for arsenic (As) and heavy metal contaminated farmland soils nearby abandoned metal mine in Korea. This method is a technique whereby amendments are incorporated and mixed with a contaminated soil. Toxic metal bind to the amendments, which reduce their mobility in soil, so the successful stabilization of multi-element contaminated soil depends on the combination of critical elements in the soil and the type of amendments. The objective of this study is to investigate the treatment effects and applicability of limestone (LS) and steel refining slag (SRS) as the amendment for farmland soil contaminated with As and heavy metals, and a lab-column test was conducted for achieving this purpose. The result showed that soil treated with LS and SRS maintained pH buffer capacity and, as a result, the heavy metal leaching concentration was quite low below the water quality standard compared to untreated soil which leachate exceeding the water quality standard was observed, however, the arsenic concentration rather increased with increasing mixture ratio of SRS. This was believed to be related to phosphorus (P) contained in SRS, and dominancy in the competitive adsorption relation between As and P binding strongly to iron might be different according to soil characteristic. We suggested that LS is a effective amendment for reducing heavy metals in soil, and SRS should be used after investigating its applicability based on the adsorption selectivity of arsenic and phosphorus in selected soil.

• Journal of Sericultural and Entomological Science
• /
• v.50 no.2
• /
• pp.133-139
• /
• 2012

The Aims of this study are to investigate ecological environments and indoor-rearing conditions of Eurema hecabe for artificial rearing. Two different nesting site, a open area nearby small river(A area; Daejin-ri, Gonyang-myeon, Sachun-si, Gyoungsangnam-do) and a foot of a hill area(B area; Noryang-ri, Seolcheon-myeon, Namhae-gun, Kyoungsangnam-do), selected for investigation of ecological habitat environment, and investigated two times per month, during six month, from June to November in 2010. In result, the number of butterflies, Eurema hecabe, at the hill area(B area) was 6 times more than the open area(A area). We observed the number of eggs, larvae and puapae in the B area more times compared to those in the A area. In the B area, Lespedeza cuneata was higher preference than the other host plant, Lespedeza pilosa and Albizia julibrissin. For development of indoor-rearing conditions, common grass yellow butterfly, Eurema hecabe, was reared in a room condition. As a result of oviposition preference experiment, 100-mated-female laid significantly higher number of eggs $104.9{\pm}19.6$ on Lespedeza cuneata plant, whereas the number of eggs was $12.7{\pm}4.5$ on Cassia obtusifolia plant. Moreover, the eggs hatched within $5.1{\pm}0.9$ days from the day of oviposition and procent of egg hatchability was 53.7% on host plant. The headwidth of each developmental larval stage were $0.36{\pm}0.02$(1st), $0.61{\pm}0.02$(2nd), $0.93{\pm}0.05$(3rd), $1.46{\pm}0.08$(4th), $2.25{\pm}0.11$(5th). The larval period was $12.1{\pm}0.9$ days under high temperature, long day condition($25^{\circ}C$, 16L : 8D), showing 81.0% pupal ratio. The pupal period was $6.9{\pm}0.7$ days, and the emergence rate was 79.6%. Based on above experiment, artificial rearing system of common grass yellow butterfly, Eurema hecabe was completed in indoor condition.

• Journal of Internet Computing and Services
• /
• v.22 no.4
• /
• pp.83-98
• /
• 2021

The purpose of this study to find the factors influencing the fire alarms using IoT firefighting facility management system data of Seoul Fire & Disaster Headquarters, and to present academic implications for establishing an effective prevention system of fire situation. As the number of high and complex buildings increases and former bulidings are advanced, the fire detection facilities that can quickly respond to emergency situations are also increasing. However, if the accuracy of the fire situation is incorrectly detected and the accuracy is lowered, the inconvenience of the residents increases and the reliability decreases. Therefore, it is necessary to improve accuracy of the system through efficient inspection and the internal environment investigation of buildings. The purpose of this study is to find out that false detection may occur due to building characteristics such as usage or time, and to aim of emphasizing the need for efficient system inspection and controlling the internal environment. As a result, it is found that the size(total area) of the building had the greatest effect on the fire alarms, and the fire alarms increased as private buildings, R-type receivers, and a large number of failure or shutoff days. In addition, factors that influencing fire alarms were different depending on the main usage of the building. In terms of time, it was found to follow people's daily patterns during weekdays(9 am to 6 pm), and each peaked around 10 am and 2 pm. This study was claimed that it is necessary to investigate the building environment that caused the fire alarms, along with the system internal inspection. Also, it propose additional recording of building environment data in real-time for follow-up research and system enhancement.

• Korean Journal of Community Nutrition
• /
• v.26 no.5
• /
• pp.327-336
• /
• 2021

Objectives: This study was conducted to create a 3D printable snack dish model for the elderly with low food or fluid intake along with barriers towards eating. Methods: The decision was made by the hybrid-brainstorming method for creating the 3D model. Experts were assigned based on their professional areas such as clinical nutrition, food hygiene and chemical safety for the creation process. After serial feedback processes, the grape shape was suggested as the final model. After various concept sketching and making clay models, 3D-printing technology was applied to produce a prototype. Results: 3D design modeling process was conducted by SolidWorks program. After considering Dietary reference intakes for Koreans (KDRIs) and other survey data, appropriate supplementary water serving volume was decided as 285 mL which meets 30% of Adequate intake. To consider printing output conditions, this model has six grapes in one bunch with a safety lid. The FDM printer and PLA filaments were used for food hygiene and safety. To stimulate cognitive functions and interests of eating, numbers one to six was engraved on the lid of the final 3D model. Conclusions: The newly-developed 3D model was designed to increase intakes of nutrients and water in the elderly with dementia during snack time. Since dementia patients often forget to eat, engraving numbers on the grapes was conducted to stimulate cognitive function related to the swallowing and chewing process. We suggest that investigations on the types of foods or fluids are needed in the developed 3D model snack dish for future studies.

• Korean Journal of Environment and Ecology
• /
• v.35 no.2
• /
• pp.164-180
• /
• 2021

Plants Social Network(PSN) analysis combines the plant sociological method and the social network analysis to understand plant society focusing on environmental-to-plant and plant-to-plant relationships. PSN is at an early stage of research and require comparing plant society analyses in various environments and existing interspecies binding analysis. This study conducted a vegetation structural analysis of Mudeungsan National Park and compared the existing interspecies connection analysis with the PSN. A total of 60 plots were established for a survey on the Old Trail. The TWINSPAN and DCA analysis showed that the 60 survey plots were divided into the Quercus serrata-Pinus densiflora community (Community I) and the Quercus mongolica community (Community II) based on an altitude of 800 meters. We performed the interspecies correlation with more than 30% emergence frequency and the DCA analysis and compared the results with a focus on the major species in each colony. The results showed that Quercus serrata had a correlation of -0.450^** and -0.375^** with Pinus densiflora and Quercus mongolica, respectively. The DCA analysis also confirmed that Quercus serrata was located close to Pinus densiflora and far from Quercus mongolica along one axis. For the PSN analysis of PSN, 40 survey plots were added to investigate the species appearing in a total of 100 survey plots. The network structural analysis showed 378 links and a species having an average of 6 interspecies bindings. The density was 0.097, the diameter was 7, and the average path distance was 2.788, similar to the PSN analysis results of the Busan Metropolitan City. The plant social network analysis showed similar results to the existing interspecies combination analysis, enabling analyzing more data than the existing methods and observing the structure of plant society.

• Food Engineering Progress
• /
• v.14 no.3
• /
• pp.208-216
• /
• 2010

Lab scale experiments were conducted in order to assess the applicability of $CaCO_{3}$-alginate beads as neutralizer for the high cell density cultivation and prepare the direct vat inoculation cultures of isolated sourdough lactic acid bacteria. With increasing the amount of bead and decreasing the diameter of bead in acidic solution, the neutralizing effect of $CaCO_{3}$-alginate bead became higher. In batch process with $CaCO_{3}$-alginate beads, Lactobacillus amylovorus DU-21 isolated from sourdough showed the highest viable cell counts and optical density in MRS broth. The values of viable cell counts and optical density were 9.996 log CFU/mL and 3.97, respectively. Experiments on the conditions which increase viability during lyophilization were carried out and the following results were obtained; 15% glycerol revealed the high cryoprotective effect on the concentrated cultures during lyophilization among the two cryoprotective agents. Consequently, $CaCO_{3}$-alginate beads and 15% glycerol were found to be useful not only to cultivate Lactobacillus amylovorus DU-21 but also to preserve strain.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.29-37
• /
• 2019

Textile quality management targets the physical properties of fabrics and the subjective discriminations of color and fitting. Color is the most representative quality factor that consumers can use to evaluate quality levels without any instruments. For this reason, quantification using a color discrimination device has been used for statistical quality management in the textile industry. However, small and medium-sized domestic textile manufacturers use only visual inspection for color discrimination. As a result, color discrimination is different based on the inspectors' individual tendencies and work procedures. In this research, we want to develop a textile industry-friendly quality management method, evaluating the possibility of rapid color discrimination using a digital imaging device, which is one of the office-automation instruments. The results show that an imaging process-based color discrimination method is highly correlated with conventional color discrimination instruments ($R^2=0.969$), and is also applicable to field discrimination of the manufacturing process, or for different lots. Moreover, it is possible to recognize quality management factors by analyzing color components, ${\Delta}L$, ${\Delta}a$, ${\Delta}b$. We hope that our rapid discrimination method will be a substitute technique for conventional color discrimination instruments via elaboration and optimization.

• Journal of The Korean Society of Inherited Metabolic disease
• /
• v.19 no.1
• /
• pp.1-11
• /
• 2019

Purpose: Congenital hypothyroidism (CH) is the most common congenital endocrine disorder. The purpose of the present study was to determine the incidence of CH in South Korea during the period from January 1991 to March 2004. Methods: Central data from each city branch of SCL (Seoul Clinical Reference Laboratories) in Yongin, South Korea, was gathered and collectively analyzed. Newborn screening (NBS) for CH was based on measuring the levels of neonatal thyroid stimulating hormone (TSH) and free T4 (a cut-off of 20 mIU/L and less than 0.8 ng/dL, respectively). Results: During the study period, 671,805 live births were screened for CH based on TSH and free T4 ELISA assays. A total of 159 newborns were deemed positive for CH out of 671,805, with a corresponding incidence of 1 in 4,225. When a cut-off of 20 mIU/L was used in TSH assays, the associated sensitivity, specificity, and positive predictive values (PPV) were 100.0%, 99.7%, and 10.8%, respectively. When a cut-off of 0.8 ng/dL in free T4 assays was used, the associated sensitivity, specificity, and PPV were 100.0%, 98.5%, and 3.9%, respectively. Conclusion: CH incidence in South Korea as evidenced by the results of NBS was compared with its incidence and comparable to the other countries prior to 2004.