• Bulletin of the Korean Chemical Society
• /
• 제26권4호
• /
• pp.614-618
• /
• 2005

The complex of the composition LaL(N$O_3)_3\;(H_2O)_2$ is prepared by the reaction of La($NO_3)_3{\cdot}6H_2O$ with Nethylmorpholine in aqueous medium. The ligand is involved in the complex as a neutral species where the chelation occurs via the oxygen of the ligand moiety and the nitrate groups as bidentate ligand. The chemical structure of the studied complex is confirmed through IR, XRD, and thermal analysis data. The complexation equilibria of La(III) with N-ethylmopholine is studied in aqueous medium at ionic strength I = 0.1 mol${\cdot}dm^{-3}\;KNO_3$ and at 25, 35 and 45 ${^{\circ}C}$, respectively. The thermodynamic parameters $\Delta$G, $\Delta$H and $\Delta$S values were calculated to prove the association with the complex formation. It is clearly observed that the process is accompanied by absorption of heat, i.e. endothermic process, while the entropy does not change greatly attributed to the release of constant number of water molecules during chelate formation.

• 대한화학회지
• /
• 제33권1호
• /
• pp.82-89
• /
• 1989

염화산화란탄(LaOCl) 결정속에서 La와 치환된 $Eu^{3+}$와 $Tb^{3+}$의 형광성질을 연구하였다. 자외선으로 들뜬 LaOCl의 형광세기를 활성제인 $Eu^{3+}$와 $Tb^{3+}$의 농도에 따라 고찰하였고, 이 현상을 활성제들 사이의 에너지 전달 과정으로 설명하였다. LaOCl 결정속에 $Eu^{3+}$와 $Tb^{3+}$를 같이 분포시키면 흡수된 에너지가 $Tb^{3+}$에서$Eu^{3+}$로 전달됨을 보았다. 치환된 활성제의 양에 따른 형광세기의 변화와 쇄잔시간의 측정으로부터 이 사실을 확인하였다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.727-728
• /
• 2006

The present work studies the influence of high-energy milling (HEM) and sintering cycle of Ti and Al powders on the obtainment of TiAl. This study shows that HEM modifies the diffusion processes during the sintering stage. The samples were obtained by cold uniaxial and isostatic pressing, pre-sintered at different temperatures, and heated up to the sintering temperature. This study also shows the effect of powder additions processed by HEM on the sintering behavior of elemental Ti and Al powders.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.207-208
• /
• 2006

In this experimental work, the development of a multicomponent binder system based on high density polyethylene (HDPE) and paraffin wax for Powder Injection Molding of Alumina $(Al_2O_3)$ parts was carried out. The optimum composition of the injection mixture was established through mixing torque measurements and a rheological study. The maximum powder loading was 58 vol%. The miscibility of organic components and the optimum injection temperature was evaluated by thermal characterization of binder and feedstock. The thermal debinding cycle was developed on the basis of thermogravimetrical analysis of the binder. After sintering the densities achieved were closed to 98% of the theoretical one.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.503-504
• /
• 2006

The MIM technology is an alternative process for fabricating near net shape components that usually uses gas atomised powders with small size $(<\;20\;{\mu}m)$ and spherical shape. In this work, the possibility of changing partially or totally spherical powder by an irregular and/or coarse one that is cheaper than the former was investigated. In this way, different bronze 90/10 components were fabricated by mixing three different types of powder, gas and water atomised with different particle sizes, in order to evaluate how the particle shape and size affect the MIM process.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.549-550
• /
• 2006

The corrosion performance of a powder metallurgical aluminum alloy in aeronautical environments was studied for both as sintered and heat treated states. Sintered samples were obtained by uniaxial pressing of an Al-Cu-Mg prealloyed powder followed by liquid phase sintering. The heat treatments applied were T4 and T6. Corrosion behaviour was assessed by means of potentiodynamic polarization. Results for the equivalent commercial wrought counterpart, AA2024-T3, are also presented for comparison. Similar corrosion performance was observed for both as sintered and AA2024-T3 samples, while corrosion resistance of the PM materials was improved by the heat treatment, especially in the T4 state.

• 이베로아메리카
• /
• 제13권1호
• /
• pp.287-317
• /
• 2011

En este trabajo tratamos de investigar el proceso la constitución nacional de la República Argentina moderna, enfocando en la contradicción entre los federales y los unitarios. En el capítulo II, ante todo hemos definido el origen y el contexto de formación de cada ideología y partido. El centro de los federales estaba en las provincias interiores y litorales, mientras que los unitarios hacen de centro la provincia de Buenos Aires. En el capítulo III, mostramos las causas de esta contradicción histórica y tratamos de caracterizar las diferencias. Explícitamente el conflicto se basa en la distinción de la visión política e ideológica, es decir, la distinción de cómo orientar la constitución nacional de la república incipiente. Sin embargo, es inevitable referir la división administrativa histórica durante la época colonial. Al mismo tiempo no debemos faltar el conflicto de interés económico respecto al puerto de Buenos Aires. En el capítulo IV, analizamos comparando las ideas de dos intelectuales, las cuales hacen un papel importante en la organización nacional. Primero analizamos el pensamiento civilizatorio de Sarmiento, y después, demostramos el pensamiento federalista de Alberdi como origen de la constitución argentina de 1853, y de la inmigración europea. Como consecuencia del estudio, podemos llegar a la conclusión de que los esfuerzos por realizar la organización nacional no siempre estaban en línea paralela de ambos partidos divididos, sino tenemos un ejemplo dialéctico y combinatorio como el caso de Alberdi.

• Asian-Australasian Journal of Animal Sciences
• /
• 제12권4호
• /
• pp.515-519
• /
• 1999

With the purpose of determining the influence of sexual partners on the oestrous behaviour and to evaluate the accuracy of predicting the time from implant withdrawal to sexual receptivity following a treatment with Synchromate B (SMB), 15 adult Brahman cows were used in each of three phases. During phase I and n, random pairs of animals were induced to display oestrus one pair after the other at daily intervals, while in phase III, cows were induced alternately, every other day, one cow on the 1st day, two on the 3rd, one on the 5th, two on the 7th until all cows were treated. Sixty six percent of the cows in phases I and II, and 80% in phase III came into oestrous after treatment. The interval between implant withdrawal and, expected and observed oestrous was statistically different in all phases. Clustering of oestrous was evident. Cows displayed sexual receptivity within a. range of -24 to +96; -24 to +72 and -216 to +192 hours after implant withdrawal for the three phases, respectively, with a tendency for cows treated first (within treatments), to delay their oestrus signs and vice versa. In phase III, four cows showed oestrous behaviour with the implant in place. These in spite of not observing pre-ovulatory follicles. Correlation values of 0.99, 0.93 and 0.90 (P<0.05) were found respectively among treatments, between the number of cows coming into oestrus and the number of mounts observed. These findings suggest that there are social and behavioural factors in a herd that may override exogenous synchronisation treatments.

• 한국초지조사료학회지
• /
• 제15권1호
• /
• pp.37-42
• /
• 1995

This experiment was canied out to study the effects of seeding and harvesting dates on the growth of early and late maturing rye(Seca1e cereale L.) varieties at the forage testing field of S.N.U., Suweon, from September 1986 to May 1989. Leaf and tiller numbers of rye per plant were increased with earlier seeding date, but no difference in the tiller numbers was found between harvesting dates of early and late maturing rye varieties. Tiller dry weight of an early maturing rye veriety, Wintermore was higher than that of a late maturing rye variety, Kodiak when sown as early as September. Maximun leaf area index(LA1) and leaf area index duration(LA1D) were achieved with earlier seeding and early maturing rye varieties. A higher correlation between the maximum LA1 or LAID and dry matter accumulation of rye varieties was observed in this experiment.

• Journal of Microbiology and Biotechnology
• /
• 제11권1호
• /
• pp.35-39
• /
• 2001

A simple method for studying the lectin-like interactions between Helicobacter pylori and cultured human epithelial cell lines was developed using an enzyme-linked, biotin-streptavidin bacterial-adhesion assay. The present study suggests that this method is suitable for evaluating the participation of lectin interactions in the adhesion of H. pylori to cultured HeLa S3 and Kato III cells, both fixed and glycosidase-treated cells, as well as assessing glycoconjugated binding inhibition studies. The time-course and dose-dependent kinetics of the biotin-labeled H. pylori adhesion th the formaldehyde-fixed Hela S3 and Kato III cell lines exhibited saturation. In addition, the binding of the biotin-labeled H. pylori to the formaldehyde-fixed cultured cells was partially blocked by pre-incubation with glycoconjugates and polyclonal antibodies against a heparan sulfate binding protein from H. pylori.