• 제목/요약/키워드: LV-SEM observation

검색결과 3건 처리시간 0.015초

저진공주사현미경(LV-SEM)을 이용한 목재횡단면의 수축거동관찰 (Observation of Shrinkage Features of Cross Sectional Surface of Wood by LV-SEM)

  • 강춘원;마츠무라 준지;강욱
    • Journal of the Korean Wood Science and Technology
    • /
    • 제36권3호
    • /
    • pp.17-23
    • /
    • 2008
  • 목재의 수축거동을 짧은 시간 내에 세포수준에서 관찰하기 위하여 목재를 함수상태로 관찰할 수 있는 저진공 주사전자현미경(Low-Vacuum Scanning Electron Microscopy)의 경통 내에서 습윤상태의 소형시편을 탈습시켜 건조시키면서 횡단면에서의 목재수축거동을 관찰하였다. 또한 동일한 개체에서 수축율 시험편을 제작하여 실제목재의 수축율을 측정하여 비교하였다. 경통 내의 탈습은 약 20여 분 정도에 완료되어 짧은 시간 내에 목재의 수축과정을 관찰하는 것이 가능하였으며, 수축율 시험편의 수축율과 현미경 내의 탈습에 의한 소시험편의 수축율은 비슷하였다. 목재의 수축율에 기여하는 춘재와 추재의 수축율에 대한 개개의 관찰이 가능하였으며 양자의 수축량은 거의 비슷하게 나타나는 것을 알 수 있었다. 목재의 수축과 세포벽수준에서의 수축을 비교해보면, 목재의 수축은 춘재보다 추재에 의해 좌우되는 사실을 알 수 있었다.

치면열구전색제와 유동성 복합 레진의 미세 경도 및 표면 조도의 비교 (MICROHARDNESS AND SURFACE ROUGHNESS OF SEALANT AND FLOWABLE COMPOSITE RESINS)

  • 양규호;최남기;김선미;최지은
    • 대한소아치과학회지
    • /
    • 제36권3호
    • /
    • pp.440-447
    • /
    • 2009
  • 본 연구는 예방적 레진 수복술에 전통적으로 사용되던 소와열구 전색제를 대신하여, 유동성 복합 레진이 사용될 경우의 타당성을 검토하기 위해 시행되었다. 비커스 미세경도를 측정하기 위해 직경 10 mm, 높이 3 mm인 11개의 시편을 제작하여 비커스 미세경도 측정기(FM-7, FUTURE-TEC Inc., Japan)를 이용하여 압입하중 50 gf, 유지시간 15초의 조건 하에서 측정하여 각 군의 평균값을 산출하였다. 표면조도를 측정하기 위해 칫솔마모시험기(Toothbrush abrasive machine K236, Tokyo Machine Co., Japan)로 4개의 시편 표면에 200 rpm의 속도로 4000회의 칫솔질을 시행한 뒤 표면조도형상측정기(Form Talysurf series 2, Rank Taylor Hobson Co., England)를 이용해 표면조도를 측정하였다. ${\alpha}$=0.05의 유의 수준에서 Kruskal-Wallis rank test와 Mann-Whitney U test를 사용하였다. 또한 주사전자현미경으로 관찰하여 각 군의 마모 양상을 비교하여 다음과 같은 결론을 얻었다. 1. 비커스 미세경도 측정 결과 Filtek Z350 flowable (3M ESPE, U.S.A), Palfique Estelite LV (Tokuyama Dental, Japan), Ultraseal XT plus (Ultradent, U.S.A) 순으로 높게 나타났으며 모든 군 간에 통계적으로 유의한 차이가 있었다(p<0.0001). 2. 표면 조도 측정 결과, $Ultraseal^{(R)}$, $Estelite^{(R)}$, $Z350^{(R)}$ 순으로 높게 나타났으나 통계적으로 유의한 차이는 없었다(p=0.116). 3. 마모되지 않은 표면과 마모가 일어난 표면을 주사전자현미경으로 관찰한 결과, 전색제인 Ultraseal XT plus와 유동성 복합레진인 Palfique Estelite LV, 나노필러를 함유한 유동성 복합레진인 Filtek Z350 flowable이 서로 다른 마모 양상이 나타나는 것을 볼 수 있었다. 이상의 결과를 토대로 할 때, 유동성 복합 레진이 전색제에 비해 물성 적 측면에서 더 우수한 것으로 나타났다.

  • PDF

Analysis of the Adsorbed Plasma Proteins in the Moving Actuator type Total Artificial Heart

  • Gyu Ha Ryu;Jon
    • 대한의용생체공학회:의공학회지
    • /
    • 제14권4호
    • /
    • pp.307-314
    • /
    • 1993
  • Plasma protein adsorption is the first event in the blood-material interaction and influenc- es subsequent platelet adhesion towards thlㅈombus formation. Thiㅈomboembolic events are strongly influenced by surface characteristics of materials and fluid dynamics inside the blood pump. In vitro flow visualizaion and an amimal experiment with the moving actuator type TAH were Performed in order to investigate fluid dynamic effects on the protein adsorption. The diffel'encl level, j of shear rate inside the ventricle Lvere determined by consid- ering the direction of the major opening of four healt valves in the implanted TAH and the visualized flow patterns as well. Each ventricle of the explanted TAH was sectionalized into 12 segments according to the shear rate level. The adsorbed protein on each segment was quantified using the ELISA method after soaking in 2% (wye)SDS/PBS for two days. Adsorbed protein layer thicknesses Itvere measured by the Immunogotd method under TEM. The SEM observation show that right ventricle (RV) , immobilized with albumin, displayed different degrees of platelet adhesion on each segment, whereas the left ventricle (LV), grafted by PEO-sulronate, indicated nearly , iame platelet adhesion behavior, regardless of shear rates. The surface concentrations of adsorbed proteins in the low shear rate region are hlghel'than those in the high region, which was confirmed statistically. A modified adsorption model of plasma protein onto polyurethane surface was suggested by considering the effect of the fluid dynamic characteristics.

  • PDF