• Korean Journal of Remote Sensing
• /
• v.23 no.1
• /
• pp.7-14
• /
• 2007

Atmospheric correction is one of critical procedures to extract quantitative information related to biophysical variables from hyperspectral imagery. Most atmospheric correction algorithms developed for hyperspectral data have been based upon atmospheric radiative transfer (RT) codes, such as MODTRAN. Because of the difficulty in acquisition of atmospheric data at the time of image capture, the complexity of RT model, and large volume of hyperspectral data, atmospheric correction can be very difficult and time-consuming processing. In this study, we attempted to develop an efficient method for the atmospheric correction of EO-1 Hyperion data. This method uses the pre-calculated look-up-table (LUT) for fast and simple processing. The pre-calculated LUT was generated by successive running of MODTRAN model with several input parameters related to solar and sensor geometry, radiometric specification of sensor, and atmospheric condition. Atmospheric water vapour contents image was generated directly from a few absorption bands of Hyperion data themselves and used one of input parameters. This new atmospheric correction method was tested on the Hyperion data acquired on June 3, 2001 over Seoul area. Reflectance spectra of several known targets corresponded with the typical pattern of spectral reflectance on the atmospherically corrected Hyperion image, although further improvement to reduce sensor noise is necessary.

• Korean Journal of Remote Sensing
• /
• v.37 no.6_3
• /
• pp.2001-2010
• /
• 2021

The purpose of this study is to efficiently improve orthorectification of KOMPSAT images. As the development of domestic and abroad earth observation satellites accelerates, the number and amounts of satellite images acquired are rapidly increasing. Accordingly, various studies are being conducted to improve orthorectification for the acquired image more quickly and efficiently. This study focused on enhancing processing efficiency through algorithm improvement, except for improving hardware computing capabilities such as GPU. Accordingly, the algorithm was improved with the LUT-based RFM method, and compared and analyzed in terms of accuracy and time-efficiency that vary depending on offset settings.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.1
• /
• pp.191-196
• /
• 2021

In this paper, we implemented an image sensor module possible of detecting color temperature in an indoor environment. The color temperature information in the video information acquired by the image sensor was matched with a color difference illuminometer to produce an LUT. An algorithm was developed so that color temperature information according to the received RGB values can be automatically calculated. As a result of measuring the color temperature with an image sensor indoors, an accurate result of less than 5.91% was obtained compared to the reference value. It was confirmed that the uniformity of 23.5% or more was excellent compared to the color temperature measurement result using a color sensor.

• Journal of IKEEE
• /
• v.26 no.2
• /
• pp.292-298
• /
• 2022

There is a limit to improving the image quality through global processing of images taken under backlighting because too bright and dark parts are mixed in one scene. This paper introduces a method to improve the quality of a photo by making two virtual images that improve the dark and bright areas of a backlit photo, and fusing them with the original image into a Laplacian pyramid. The proposed method reduces the computational burden by using histogram stretching and gamma transformation that can be simplified with LUT when creating the two virtual images. In addition, in order to obtain a color-enhanced image, contrast conversion was performed only on the luminance using the HSV coordinate system. The proposed technique showed its effectiveness by calculating several NIQA indicators using standard image data sets.

• Journal of IKEEE
• /
• v.26 no.4
• /
• pp.653-658
• /
• 2022

This paper presents a Maximum Torque per Ampere (MTPA) control algorithm for an interior permanent magnet synchronous motor (IPMSM) drive considering the permanent magnet (PM) flux linkage variations due to PM temperature variation. PM flux linkage are estimated in real time via a Gopinath style stator flux linkage observer and a torque error correction factor is calculated from the estimated PM flux linkage. A 2-dimensional (2D) MTPA look-up table (LUT) is developed to achieve the MTPA trajectory reflecting PM flux linkage variation for compensating torque error occurred by parameter variation. The proposed IPMSM control algorithm is verified through simulations.

• Journal of radiological science and technology
• /
• v.33 no.2
• /
• pp.97-107
• /
• 2010

The objectives of this study is to figure out the unknown image processing methods of commercial CR system. We have implemented the processing curve of each Look up table(LUT) in REGIUS 150 CR system by using virtual digital test pattern method. The characteristic of Dry Imager was measured also. First of all, we have generated the virtual digital test pattern file with binary file editor. This file was used as an input data of CR system (REGIUS 150 CR system, KONICA MINOLTA). The DICOM files which were automatically generated output files by the CR system, were used to figure out the processing curves of each LUT modes (THX, ST, STM, LUM, BONE, LIN). The gradation curves of Dry Imager were also measured to figure out the characteristics of hard copy image. According to the results of each parameters, we identified the characteristics of image processing parameter in CR system. The processing curves which were measured by this proposed method showed the characteristics of CR system. And we found the linearity of Dry Imager in the middle area of processing curves. With these results, we found that the relationships between the curves and each parameters. The G value is related to the slope and the S value is related to the shift in x-axis of processing curves. In conclusion, the image processing method of the each commercial CR systems are different, and they are concealed. This proposed method which uses virtual digital test pattern can measure the characteristics of parameters for the image processing patterns in the CR system. We expect that the proposed method is useful to analogize the image processing means not only for this CR system, but also for the other commercial CR systems.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.8
• /
• pp.857-864
• /
• 2010

In this paper, we analyse the effect of the path imbalances(gain and phase mismatches) in LINC(LInear amplification with Nonlinear Component) system, and propose a simple scheme using LUTs(Look Up Table) to compensate the path imbalances. The EVM(Error Vector Magnitude) and ACPR(Adjacent Channel Power Ratio) of the LINC system are degraded significantly by the path imbalances because it adopts an outphasing technique. The EVM and ACPR are theoretically extracted for two variables(gain and phase mismatch factors) and 2-D LUTs for those are generated based on the analysis. The efficient and simple compensation scheme for the path imbalances is proposed using the 2-D LUTs. A LINC system with the suggested compensation scheme is implemented, and the proposed method is verified with an experiment. A 16-QAM signal with 1.5 MHz bandwidth is used. Before the compensation, the path gain ratio was 95 % and phase error was $19.33^{\circ}$. The proposed scheme adjusts those values with 99 % and $0.5^{\circ}$, and improves ACPR about 18.1 dB.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.33 no.3
• /
• pp.363-374
• /
• 2023

A white-box environment refers to a situation where the internal information of an algorithm is disclosed. The AES white-box encryption was first announced in 2002, and in 2016, a side-channel analysis for white-box encryption called Differential Computation Analysis (DCA) was proposed. DCA analysis is a powerful side-channel attack technique that uses the memory information of white-box encryption as side-channel information to find the key. Although various countermeasure studies against DCA have been published domestically and internationally, there were no evaluated or analyzed results from experiments applying the hiding technique using dummy operations to DCA analysis. Therefore, in this paper, we insert LU T-shaped dummy operations into the WBC-AES algorithm proposed by S. Chow in 2002 and quantitatively evaluate the degree of change in DCA analysis response depending on the size of the dummy. Compared to the DCA analysis proposed in 2016, which recovers a total of 16 bytes of the key, the countermeasure proposed in this paper was unable to recover up to 11 bytes of the key as the size of the dummy decreased, resulting in a maximum decrease in attack performance of about 68.8%, which is about 31.2% lower than the existing attack performance. The countermeasure proposed in this paper confirms that the attack performance significantly decreases as smaller dummy sizes are inserted and can be applied in various fields.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.451-454
• /
• 2004

We studied on the performance optimized synthesis and mapping of design on to one or more FPGA device. Our multi-phased approach optimized the key parameters that affect performance by adequately modeling the impact on wire length, routability, and performance during technology mapping to produce designs that have high performance and high routability potential.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.787-790
• /
• 1998

In this paper, we presents a method for multi-level logic mainmization which is suitable for the minimization of look-up table type FPGAs. A pattern extraction algorithm is minimized AND/XOR multi-level circuits. The circuits apply to Roth-Karp decomposition which is most commonly used technique in the FPGA technology mapping. We tested the FPGA synthesis method using pattern extraction on a set of benchmark. The proposed method achieved reductions on the number of LUTs in mapping soultion as compared with MISII(or SIS) or previous results〔5〕