• Journal of the Korean Vacuum Society
• /
• v.7 no.s1
• /
• pp.156-158
• /
• 1998

This paper describes the preparation of boron-doped polycrystalline diamond thin film whose electrical resitivity is lower than $10^{-1}\Omega$cm. The 1$\times$1$\textrm{mm}^2$ microelectrodes, its conducting line with 0.2mm wide and 0.5$\times$0.5$\textrm{mm}^2$ pads was patterned by reactive ion beam etching. A glucose microsensor based on diamond film microelectrode and pyramidal containment produced on silicon by anisotropic etching was developed. Its advantages are high sensitivity and high stability.

• Journal of Navigation and Port Research
• /
• v.40 no.2
• /
• pp.57-65
• /
• 2016

The port throughput situation has changed since the 2008 financial crisis in the US. Therefore, we studied the situation, accurately estimating port traffic of Korean port after the 2008 financial crisis. We ensured the proper port facilities in response to changes in port traffic. In the results of regression analysis, Korean GDP and the real effective exchange rate of Korean Won were found to increase the container throughput in Korean and Busan port, as well as trade volume with China. Also, the real effective exchange rate of Korean Won was found to increase the port transshipment cargo volume. Based on the ARIMA models, we forecasted port throughput and port transshipment cargo volume for the next six years (72 months), from 2015 to 2020. As a result, port throughput of Korean and Busan ports was forecasted by increasing annual the average from about 3.5% to 3.9%, and transshipment cargo volume was forecasted by increasing the annual average about 4.5%.

• Structural Monitoring and Maintenance
• /
• v.5 no.2
• /
• pp.189-204
• /
• 2018

This paper examines the seismic responses of a reinforced concrete (RC) frame core-tube building with pre-pressed spring self-centering energy dissipation (PS-SCED) braces. The PS-SCED brace system consists of friction devices for energy dissipation, pre-pressed combination disc springs for self-centering and tube members as guiding elements. A constitutive model of self-centering flag-shaped hysteresis for PS-SCED brace is developed to better simulate the seismic responses of the RC frame core-tube building with PS-SCED braces, which is also verified by the tests of two braces under low cyclic reversed loading. Results indicate that the self-centering and energy dissipation capabilities are well predicted by the proposed constitutive model of the PS-SCED brace. The structure with PS-SCED braces presents similar peak story drift ratio, smaller peak acceleration, smaller base shear force and much smaller residual deformations as compared to the RC frame core-tube building with bucking-restrained braces (BRBs).

• Journal of Multimedia Information System
• /
• v.5 no.3
• /
• pp.179-188
• /
• 2018

In order to overcome the problems of contact palmprint recognition, a non-contact palmprint recognition system is developed on personal computer (PC) platform. Three methods, namely "double-line-single-point" (DLSP), "double-assistant-crosshair" (DAC) and "none-assistant-graphic" (NAG), are implemented for the palmprint localization to solve the severe technical challenges, including the complex background, variant illuminations, uncontrollable locations and gestures of hands. In NAG, hand segmentation and the cropping of region of interest are performed without any assistant graphics. The convex hull contour of hand helps detect the outside contour of little finger as well as the valley bottom between thumb and index finger. The three methods of palmprint localization have good operating efficiency and can meet the performance requirements of real-time system. Furthermore, an attendance system on PC platform is designed and developed based on non-contact palmprint recognition.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10b
• /
• pp.189-192
• /
• 2003

The Electro-thermal Explosion Coating (EEC) technique is a new surface treatment technology emerged in recent years. It uses an electrical discharge (with very high voltage from 5 to 30 kV or more) to produce a pulse current with large density inside the material to be deposited, the metal wire undergo the heating, melting, vaporization, ionization and explosion processes in a very short time (from tens ns to several hundreds ${\mu}s$), and the melted droplets shoot at the substrate with a very high velocity (3000 - 4500 m/s), so that the coating materials can be deposited on the surface of the substrate. Coatings with nano-size grains or ultra- fine grains can be formed because of rapid solidification (cooling rate up to $10^6-10^9\;k/s$). Surface of the substrate (about $1-5{\mu}m$ in depth) can be melted rapidly and coatings with very high bonding strength can be obtained.

• The korean journal of orthodontics
• /
• v.42 no.5
• /
• pp.270-278
• /
• 2012

In the correction of dental Class III molar relationship in skeletal Class II patients, uprighting of the mandibular posterior segments without opening the mandible is an important treatment objective. In the case reported herein, a C-tube miniplate fixed to the lower labial symphysis and connected with a nickel-titanium reverse-curved archwire provided effective uprighting of the lower molars, without the need of orthodontic appliances on the mandibular anteriors. Using this approach, an appropriate magnitude of force is exerted on the molars while avoiding any negative effect on the mandibular anteriors.

• Structural Engineering and Mechanics
• /
• v.46 no.5
• /
• pp.595-613
• /
• 2013

A new effective model for calculation of the equivalent uniform blast load for non-uniform blast load such as close-in explosion of a one-way square and rectangle reinforced concrete slab is proposed in this paper. The model is then validated using single degree of freedom (SDOF) system with the experiments and blast tests for square slabs and rectangle slabs. Test results showed that the model is accurate in predicting the damage level on the tested RC slabs under the given explosive charge weight and stand-off distance especially for close-in blast load. The results are also compared with those obtained by conventional SDOF analysis and finite element (FE) analysis using solid elements. It is shown that the new model is more accurate than the conventional SDOF analysis and is running faster than the FE analysis.

• Journal of applied mathematics & informatics
• /
• v.30 no.5_6
• /
• pp.759-772
• /
• 2012

In this paper, semi-infinite constrained programming, a class of constrained nonsmooth optimization problems, are transformed into unconstrained nonsmooth convex programs under the help of exact penalty function. The unconstrained objective function which owns the primal-dual gradient structure has connection with $\mathcal{VU}$-space decomposition. Then a $\mathcal{VU}$-space decomposition method can be applied for solving this unconstrained programs. Finally, the superlinear convergence algorithm is proved under certain assumption.

• Bulletin of the Korean Mathematical Society
• /
• v.51 no.5
• /
• pp.1281-1289
• /
• 2014

In this paper, we consider the differential equation $$F^{\prime}-Q_1=Re^{\alpha}(F-Q_2)$$, where $Q_1$ and $Q_2$ are polynomials with $Q_1Q_2{\neq}0$, R is a rational function and ${\alpha}$ is an entire function. We consider solutions of the form $F=f^n$, where f is an entire function and $n{\geq}2$ is an integer, and we prove that if f is a transcendental entire function, then $\frac{Q_1}{Q_2}$ is a polynomial and $f^{\prime}=\frac{Q_1}{nQ_2}f$. This theorem improves some known results and answers an open question raised in [16].

• BMB Reports
• /
• v.41 no.5
• /
• pp.358-362
• /
• 2008

RNA interference (RNAi) is the process of sequence-specific gene silencing. However, RNAi efficiency still needs to be improved for effective inhibition of target genes. We have developed an effective strategy to express multiple shRNAs (small hairpin RNA) simultaneously using multiple RNA Polymerase III (Pol III) promoters in a single vector. Our data demonstrate that multiple shRNAs expressed from Pol III promoters have a synergistic effect in repressing the target gene. Silencing of endogenous cyclophilin A (CypA) or key HIV viral genes by multiple shRNAs results in significant inhibition of the target gene.