• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2239-2241
• /
• 2004

이 논문은 최적 제어 설계방법 중 하나인 LQR 제어기의 과도 상태를 개선하는 방법에 관한 연구이다. 적절한 상태가중행렬과 제어가중행렬을 설정한 후 대수 Riccati 방정식을 풀면 LQR 제어기가 설계된다. 그런데 이 가중행렬은 시행착오 방법을 이용하여 설정하기 때문에 설계된 제어기의 과도 상태를 개선하기 하기가 매우 어렵다. 이러한 문제점을 해결하기 위한 방법으로 closed-loop 근과 가중행렬과의 상관관계를 수학적으로 표현하고, 이를 바탕으로 설계조건을 만족하도록 시스템의 근을 이동시키는 가중행렬을 구하는 방법을 제시한다. 원운동형 도립진자(rotary type inverted pendulum)를 통해 matlab 모의실험으로 그 타당성을 검증한다. 얻어진 결과를 이용하면 원하는 극점을 갖는 LQR 제어기를 체계적으로 설계할 수 있다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.6
• /
• pp.676-682
• /
• 1999

A study which develops a controller design methodology that has flexibility of eigenstructure assignment within the stability-robustness contraints of LQR is requried and has been performed. The previously developd control design methodology, namely, EALQR(Eigenstructure Assignment/LQR) has better performance than that of conventional LQR or eigenstructure assignment but has a constraint for the weitgting matrix in LQR, which could be indefinite for high-order system. In this paper, the effects of the indefinite Q in EALQR on the frequency domain properties are analyzed. The robustness criterion and quantitative frequency domain properties are also resented. Finally, the frequency domain properties of EALQR has been analyzed by applying to a flight control system design example.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.11
• /
• pp.108-120
• /
• 1998

In this paper, a new control system design algorithm, which has the advantages of the existing LQR and eigenstrcture assignment methods, is proposed. The method of the transformation matrix via block controller is utilized to develop the scheme. Using the proposed algorithm, LQR weighting matrices q and R, which satisfy the desired closed-loop eigenvalues and eigenvectors, can be achieved using only simple matrix computations. The usefulness of the proposed scheme is verified by applying to a numerical example and an automotive active suspension control system design.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.5
• /
• pp.551-556
• /
• 2014

This paper proposes a balancing control and driving control of a bicycle robot based on dynamic modeling of the bicycle robot, which has been derived using the Lagrange equations. For the balancing control of the bicycle robot, a reaction wheel pendulum method has been adopted in this research. By using the dynamics equations of the bicycle robot, an LQR controller has been designed for a balancing and driving control of a bicycle robot. The performance of the balance control is verified experimentally before the driving control, which shows a stable posture within one degree vibrations. To show the dynamic characteristics of the bicycle robot during driving, a trapezoidal velocity trajectory is selected as the references. Through simulations and real experiments, the effectiveness of the proposed algorithm has been demonstrated.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2000.04b
• /
• pp.431-438
• /
• 2000

The cost function consists of the weighting functions concerning the structural responses to be controlled and the controller capability. Therefore, the control efficiency depends on the characteristics of the weighting functions. The objective of this paper is the comparative study of the time domain control strategies of LQR and LQG and the frequency domain strategy of H₂ by setting the equivalent weighting functions to the all control strategies. As a result of analysis, LQR strategy is found to be more efficient than other strategies in terms of the response reduction. but the control force is found to be a little highter. As LQG can compensate the limitation of LQR that all state variables should be identified, LQG is more acceptable algorithm than LQR. Furthermore LQG shows a good performance both in the response reduction and the control force. Finally H₂ algorithm is employed to illustrate the importance of weighting filters considering the frequency characteristics of the response and the controller. It Is shown that the H₂ algorithm is found to be the most effective one for the response control with a little control force having a low frequency band.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1080-1085
• /
• 2005

A hybrid control scheme is proposed for the stabilization of backward movement along simple paths for a vehicle composed of a truck and six trailers. The hybrid comprises the combination of a linear quadratic regulator (LQR) and a neurocontroller (NC) that is trained by a genetic algorithm (GA). Acting singly, either the NC or the LQR are unable to perform satisfactorily over the entire range of the operation required, but the proposed hybrid is shown to be capable of providing good overall system performance. The evaluation function of the NC in the hybrid design has been modified from the conventional type to incorporate both the squared errors and the running steps errors. The reverse movement of the trailer-truck system can be modeled as an unstable nonlinear system, with the control problem focusing on the steering angle. Achieving good backward movement is difficult because of the restraints of physical angular limitations. Due to these constraints the system is impossible to globally stabilize with standard smooth control techniques, since some initial states necessarily lead to jack-knife locks. This paper demonstrates that a hybrid of neural networks and LQR can be used effectively for the control of nonlinear dynamical systems. Results from simulated trials are reported.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.470-473
• /
• 1995

There exist two critical in application of the magnetic bearing system. One is the control axis interference caused by gyroscopic effect and the other is the vibration caused by the unbalance on the rotor. To solve both problems at the same time, first, a centralized full-state feedback controller based on the LQR control theory was designed to compensate for the gyroscopic effect. Second, disturbance rejection control input based on the observer was designed to avoid the vibration causer by the unbalanced rotor. Balancing input computer accroding to LQR and output of the observer were derived in term of rotational speed. Effectiveness of the on-line balancing was verified through numerical simulation. The developed observer-based controller was also applied to the linear and nonlinear magnetic bearing systems.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.5
• /
• pp.99-107
• /
• 2003

In a winding process, important control specifications include regulation of web tension and velocity. In this research, an adaptive controller has been developed for controlling web tension and velocity in winding processes. For the controller design, the linear quadratic regulator theory has been adopted and a gain-scheduling scheme has been incorporated. A prototype winding system has been constructed, and the controller has been implemented in a real-time PC-based environment. The performance of the closed loop system has been evaluated via simulation and experiments, and it was observed that both the web tension and velocity could be regulated within a small tolerance.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.6 s.52
• /
• pp.93-102
• /
• 2006

Control input's saturation of active control devices for large structures under large external disturbances are often occurred. It is more difficult to obtain the exact values of mass and stiffness as structures are higher. The modelling errors between mathematical models and real structures must be also included as parameter uncertainties. Therefore, in active vibration control of civil engineering structures like buildings and bridges, the robust saturation controller design method considering both control input's saturation and parameter uncertainties of system is needed. In this paper, stabilities of linear optimal controller LQR, modified bang-bang controller, saturated sliding mode controller, and robust saturation controller among various controllers which have been studied and applied to active vibration control of buildings are investigated. Especially, unstable phenomena of the LQR, the modified bang-bang controller and the saturated sliding mode controller when the control input is saturated or parameter uncertainties exist are presented to show the necessity of the robust saturation controller. The robust stability of the robust saturation controller are shown through a numerical example of a 2DOF linear vibrating system and an experimental test of the two-story structure with an active mass damper (AMD).

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2493-2496
• /
• 2003

This paper presents an optimal tuning method of decentralized PID controller of two-input, two-output(TITO) second order system to be formulated as LQR.