• 환경정보
• /
• 통권382호
• /
• pp.30-31
• /
• 2009

o 총 24개국 273업체가 참여하여 "LPI 하이브리드 저탄소 녹색자동차" 등 약 1,500여의 환경신기술 및 녹색 신제품 전시. o 중국, 일본, 베트남, 알골라 등 40여개국 600여명의 해외바이어 참가, 1,500억원의 수출계약 추진 및 향후 4,000억원 이상의 수출계약 전망.

• 한국전자통신학회논문지
• /
• 제8권3호
• /
• pp.389-395
• /
• 2013

이더넷은 전 세계적으로 가장 널리 배치되어 사용되는 가입자망 네트워킹 기술이다. 이더넷의 에너지 효율성을 향상시키기 위해 IEEE 802.3az WG에서 LPI 기반의 EEE 규격을 확정하였다. 본 논문은 소규모 이더넷 스위치에서 EEE 를 기반으로 에너지 효율을 향상시킬 수 있는 개선된 적응적 전력 제어 메커니즘을 제안한다. 본 메커니즘의 특징은 일정기간 유입되는 트래픽 양을 측정하여 다음 주기의 트래픽 특성을 예측하고, 해당 트래픽 부하에 최적의 threshold 값을 조정한다. 성능분석 결과는 본 논문에서 제안한 메커니즘이 기존 방법에 비해서 평균 패킷 지연은 약간 증가시키지만 에너지 소비율을 상당히 감소시키므로 전반적으로 성능을 향상시키는 것으로 나타났다.

• 한국수소및신에너지학회논문집
• /
• 제13권4호
• /
• pp.297-303
• /
• 2002

The purpose of study is obtaining low-emission and high-efficiency in LPi engine with hydrogen enrichment. The test engine was named variable compression ratio single cylinder engine (VACRE). The fuel supply system provides LPG/hydrogen mixtures based on same heating value. A varied sensors such as crank shaft position sensor (CPS) and hall sensor supplies spark timing data to ignition controller. Displacement of VACRE is $1858.2cm^3$. VACRE was runned 1400rpm with compression ratio 8. Spark timing was set MBT without knocking. Relative air-fuel ratio($\lambda$) of this work was varied between 0,8 and 1.5.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제4권1호
• /
• pp.31-36
• /
• 2002

Peptidohlycan recognition protein (PGRP) is one of the pattern recognition proteins in innate immunity of insect. We isolated differentially expressed two cDNAa, BTL-LPI and BTL-LP2, in the fat body of Bombyx mori larvae injected with bacteria by subtractive hybridization method. These two clones showed amino acid sequence divergence of 30.4%. In the comparison with other insect PGRP genes, BTL-LP2 showed 48.8% and 45.2% of sequence homology to the known PGRP genes of Bombyx mori and Tricoplusia ni, respectively, and BTL-LP2 was 31.8% and 30.9% , respectively. Phylogenetic analysis showed relatively close relationship of the BTL-LP2 to the known insect PGRP, unlike BTL-LPI, which was equidistant both to insect and mammals, suggesting a divergent relationships of the two newly cloned B. mori PGRP genes. Northern blot analyses confirmed an induction of the expression of BTL-LP2 by the bacterial infection in the Int body of B. mori, suggesting the involvement of the gene in the insect immunity.

• 한국농공학회논문집
• /
• 제49권6호
• /
• pp.65-76
• /
• 2007

Studies in landscape ecology have emphasized on the relationship between landscape patterns and shapes. A variety of landscape metrics has been developed so far to quantify landscape structures. Therefore, their developments and widespread applications become possible with the advent of spatial information systems including geographic information systems(GIS) and remote sensing. This study is to grasp the change of land use and landscape ecology indices, and to analyze the change of landscape structure in a part of Gyeonggi-do during 15 years from 1985 to 2000. Green-area distribution maps and agricultural-area distribution maps for the analysis were reconstructed from land cover maps constructed by WAMIS(Water Management Information System). And then, 4 landscape ecology indices(TA, LPI, SHAPE_AM, CAI_MN) for the green-area and 5 landscape ecology indices(TA, PD, LPI, LSI, CAI_MN) for the agricultural-area were selected by using pearson correlation analysis. According to the spatio-temporal change analysis using landscape ecology indices, the green-area fragmentation of Yongin was the most severe of the study area and the agricultural-area fragmentation of Gwangju and Namyangju was more severe than any other regions.

• Journal of Communications and Networks
• /
• 제15권5호
• /
• pp.457-463
• /
• 2013

In recent days, cooperative diversity and communication security become important research issues for wireless communications. In this paper, to achieve low probability of interception (LPI) and high throughput in the cooperative single-carrier frequency division multiple access (SC-FDMA) system, a new physical layer transmission scheme is proposed, where a new encryption algorithm is applied and adaptive modulation is further considered based on channel state information (CSI). By doing so, neither relay node nor eavesdropper can intercept the information signals transmitted from user terminal (UT). Simulation results show above new physical layer transmission scheme brings in high transmission safety and secrecy rate. Furthermore, by applying adaptive modulation and coding (AMC) technique according to CSI, transmission throughput can be increased significantly. Additionally, low peak-to-average power ratio (PAPR) characteristic can still be remained due to the uniform distribution of random coefficients used for encryption algorithm.

• 한국생산제조학회지
• /
• 제20권2호
• /
• pp.151-156
• /
• 2011

This study examined the casting analysis of fuel pressure regulator of LPI vehicles. We aims to predict all the phenomenon accompanied by flow and solidification in die casting, and maximize productivity and quality through optimal casting design. As a result of comparing Types A and B of casting design, it was found that the number of overflow affected flow, flowspeed and solidification temperature. And there was a minute difference between solidification temperatures at thick section of the spare parts. Solidification began at temperatures of $624^{\circ}C{\sim}630^{\circ}C$ but after the casting was completed, temperatures at the center of the parts were $600^{\circ}C{\sim}614^{\circ}C$ Temperature of molten metal showed optimal flow at temperature of $680^{\circ}C$. It began to solidity around at $650^{\circ}C$ and to be cooled between $580^{\circ}C{\sim}550^{\circ}C$ in high speed. When the process was analysed through a computer simulation, it was found that hardness of regulators manufactured through Type B of overflow was above $H_R60$.

• 한국지반환경공학회 논문집
• /
• 제20권5호
• /
• pp.5-12
• /
• 2019

2017년 11월 15일 발생한 $M_L=5.4$의 포항지진으로 액상화 피해사례가 접수되었으며 이에 대한 많은 연구가 수행 중에 있다. 지진에 의한 피해사례가 전무하였던 우리나라의 경우, 예방 및 대비에 해당하는 지진위험지도 작성과 지진 및 지진해일 관측시스템의 구축에 매우 소극적이었다. 지진은 가뭄, 홍수나 태풍 등과 달리, 발생 징후를 관찰하고 그 영향 및 규모를 미리 예측하기란 거의 불가능에 가깝기 때문에 예방 및 대비차원의 액상화 위험지도와 같은 지진재해지도 구축은 매우 효과적일 수 있다. 본 연구는 수도권지역 14,040개의 시추공 데이터를 수집하여 지반증폭계수를 이용한 액상화 평가를 우선적으로 실시하고 최대기반암가속도는 재현주기 200년부터 4,800년을 포함하는 최대기반암가속도 0.06g, 0.14g, 0.22g, 0.30g에 대한 액상화 위험지도를 작성하였다. 또한, 실시간 예측 가능한 액상화 위험지도 작성을 위해 지진가속도와 상관관계 분석을 실시하였으며 그 결과로 수치지도의 모든 셀에 해당하는 상관식이 제안되었다. 최종적으로 제안된 상관식을 이용하여 가상의 지진에 대한 액상화 위험지도를 작성하였다.

• 한국방재안전학회논문집
• /
• 제12권1호
• /
• pp.45-56
• /
• 2019

본 연구는 수도권 지역의 전력구 매설지반을 대상으로 지진 재현주기 1,000년을 고려한 최대기반암가속도 0.154g로 설정하여 지진시 위험을 평가하였다. 이때, 지진시 위험도 평가는 총 3단계로 진행하였으며 1단계는 대상지역의 지반조사 정보를 기초로 지반분류를 우선 실시한 후, 액상화 발생가능성을 파악할 수 있는 Macro영역 기법인 지반증폭계수를 이용한 액상화 발생가능지수(LPI, Liquefaction Potential Index) 재해지도를 이용하여 후보지를 선정한다. 2단계 위험도 평가는 1단계 평가에서 액상화 발생가능성이 매우 높게 판정된 전력구 주변의 시추주상도를 바탕으로 부지특성을 반영한 지진응답해석을 수행하고 이를 토대로 액상화 발생가능성 지수를 재산정하여 지진시 액상화 위험도를 상세평가 하였다. 3단계는 시추공자료를 기반으로 하는 한계성을 보완하기 위하여 2단계에서 액상화 발생가능성이 높게 평가된 대상 전력구의 현장조사를 실시하여 건설시 보강공법적용, 내진설계적용 및 현장상태 등을 고려하여 최종적으로 액상화 위험도를 평가하였다.

• 한국인쇄학회:학술대회논문집
• /
• 한국인쇄학회 2007년도 추계 학술논문 발표회
• /
• pp.13-28
• /
• 2007

Producing printing plate is essential progress to do offset printing. In this Film-less period, the more PS plate becomes extinct, the more the age of the Plate-Making of Exposure declines the place to stand. To do offset printing, the CTP (Computer to Plate) is taking a place of PS plate that covers speed, quality and economical problems. The biggest advantage of using CTP is that laser directly goes to the plate, thus there are no dust from the Plate-Making of Exposure. It is also theoretically able to print 200lpi${\sim}$300lpi as well as print 1751pi, because it has over 2400dpi resolution. The high quality printing could be available inside of the country, if printing machine keeps the optimum condition in offset printing. The CTP has many advantages, however there is a difficulty for the operators to preserve the equipment. The actual circumstance is that they cannot make a decision about how many dots need to be generated, and also it is necessary to know how to establish the setup at RIP on CTP to make the optimum condition output. If offset printing machine keeps the optimum condition, it would be able to print up to high quality printing however it is hard to comment what is the optimum condition for the printing machine. Anyone could say easy subjectively that machine is in the optimum condition, however it is objectively hard to estimate by number. In this research GATF / Plate Test target used to analyze the image and to make numerical value of the optimum condition of the CTP. It also used GATF / The sheep fed test printing 5.0 to know the density of the color representation, dot gain and gray balance for the optimum condition of the print machine. The purpose of this research is to represent the ISO 12647-2 which is the international standard with domestic printing equipments.