• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.1
• /
• pp.78-85
• /
• 2008

The exhaust emission characteristics of a liquefied petroleum gas-di-methyl ether (LPG-DME) compression ignition engine was investigated under homogeneous charge, stratified charge and diffusion combustion conditions. LPG was used as the main fuel and injected into the combustion chamber directly. DME was used as an ignition promoter and injected into the intake port. Different LPG injection timings were tested to verify the combustion characteristics of the LPG-DME compression ignition engine. The combustion was divided into three region which are homogeneous charge, stratified charge, and diffusion combustion region according to the injection timing of LPG. The HC emission was reduced with LPG stratification. However, the carbon monoxide and particulate matter emissions were increased. The ignition timing was advanced with LPG stratification. This advance combustion was because of charge temperature and cetane number stratification with LPG.

• Journal of ILASS-Korea
• /
• v.12 no.2
• /
• pp.94-100
• /
• 2007

The liquid phase LPG injection (LPLi) system (the third generation technology) has been considered as one of the next generation fuel supply systems for LPG vehicles, since it has a very strong potential to accomplish the higher power, higher efficiency, and lower emission characteristics than the mixer type (the second generation technology) fuel supply system. To investigate the characteristics of LPG residue in liquid phase LPG injection system, various rubbers in LPG fuel system were reacted with LPG fuels during 3 months. The experimental results showed that the residue of a cover rubber in a fuel pump after test increased 10 times higher than that before test. Furthermore, the amount of sulfur, nitrogen species which are considered as main sources in deposit formation in the LPLi fuel injector were also found to be higher than that in original LPG fuel. And rubber properties of fuel pump cover were decreased after reaction test compared with those of the original rubber. Therefore, the rubber for fuel pump cover is not suitable for a proper material in LPLi fuel system. And these results can provide more information if a motor company shares the data of core rubber parts in field test LPLi vehicles.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.1
• /
• pp.35-42
• /
• 2009

In this study, a spark ignition engine operated with LPG and DME blended fuel was studied experimentally. The effect of n-butane and propane on performance and emissions of a SI engine fuelled by LPG/DME blended fuel were examined. Stable engine operation was achieved for a wide range of engine loads with propane containing LPG/DME blended fuel compare to butane containing LPG/DME blended fuel since octane number of propane was much higher than that of butane. Also, engine output operated with propane containing blended fuel was comparable to pure LPG fuel operation. Engine output power was decreased and break specific fuel consumption (BSFC) was increased with the blended fuel since the energy content of DME was much lower than that of LPG. Considering the results of engine output power, bsfc, and exhaust emissions, the propane containing LPG/DME blended fuel could be used as an alternative fuel for LPG.

• Journal of the Korean Institute of Gas
• /
• v.11 no.4
• /
• pp.29-34
• /
• 2007

In recent years, the need for more fuel-efficient and lower-emission vehicles has driven the technical development of alternative fuels such as LPG(Liquefied Petroleum Gas) which is able to meet the limits of better emission levels without many modifications to current engine design. LPG has a hish vapor pressure and lower viscosity and surface tension than diesel and gasoline fuels. These different fuel characteristics make it difficult to directly apply the conventional gasoline or diesel fuel pump. In this study, experiments are performed to get performance and efficiency of the fuel pump under different condition of the temperature, rotating speeds, and composition of fuel. The characteristics of fuel pump were affected by cavitation occurred from the variation of temperature and composition.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.3
• /
• pp.816-825
• /
• 2018

Recently, it was emerged to need the necessity of LPG residues management due to the finding some substances such as rust. This study is performed to investigate the characteristics of LPG residues in the production and distribution stage of LPG. For the qualitative analysis of LPG residues, it was operated to be set up the analysis conditions(the flow rate, etc) of GC-MS and was performed to analyze the component of LPG residues. From the analysis result using GC-MS, it was shown that the component of LPG residues was turned out the plasticizer to be used in the rubber manufacturing process. The inorganic components of LPG residues were analyzed using ICP-OES. At the results of inorganic analysis, it was shown that the Si element was detected, which was presumably derived from defoamers used mainly in the LPG production. Also, the P and Zn element, which are estimated to be components of grease additives used for filling facilities, were also partially detected. No trace of rusting was detected in the LPG residues in the production and distribution stages analyzed in this study. But, as plasticizers and grease additives can affect to the LPG fuel system in vehicles, it will be necessary to use the proper quality of rubber and to expand the use of low boiling grease additives.

• Journal of the Korean Institute of Gas
• /
• v.24 no.1
• /
• pp.10-16
• /
• 2020

In the safety control and business of liquefied petroleum gas act, LPG supply using bulk lorry of liquefied petroleum gas dealer is possible only to small storage tanks of less than 3 tons in bulk lorry less 10 tons. The government has announced plans to extend the bulk lorry supply to storage tanks of less than 10 tons, reflecting improved safety management capabilities of liquefied petroleum gas dealer. Therefore, in order to supply LPG to the storage tank stably through the bulk lorry, the technical evaluation of the existing bulk lorry LPG supply system is needed. In this study, we will investigate the status of LPG supply system in Korea through bulk lorry and investigate safe LPG supply method. First, we conducted a survey on the supply of LPG storage tanks through bulk lorry to related companies to collect basic data. Based on the results of the surveys, we will conduct field surveys to provide basic data for stable LPG supply.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.2
• /
• pp.238-247
• /
• 2023

Liquefied petroleum gas (LPG) is an attractive fuel for ships considering its current technology and economic viability. However, safety guidelines for LPG-fueled ships are still under development, and there have been no cases of applying LPG propulsion systems to small and medium-sized ships in Korea. The purpose of this study was to perform an objective risk assessment for the first marine LPG engine system and propose safe operational standards. First, hazard and operability (HAZOP) analysis was used to divide the engine system into five nodes, and 58 hazards were identified. To compensate for the subjectivity of qualitative evaluation using HAZOP analysis, fuzzy set theory was used, and additional risk factors, such as detectability and sensitivity, were included to compare the relative weights of the risk factors using a fuzzy analytical hierarchy process. As a result, among the five risk factors, those with a major impact on risk were determined to be the frequency and severity. Finally, the fuzzy technique for order of preference by similarity to ideal solution (TOPSIS) was applied to select the risk rank more precisely by considering the weights of the risk factors. The risk level was divided into 47 groups, and the major hazard during the operation of the engine system was found through the analysis to be gas leakage during maintenance of the LPG supply line. The technique proposed can be applied to various facilities, such as LPG supply systems, and can be utilized as a standard procedure for risk assessment in developing safety standards for LPG-powered ships.

• LP가스
• /
• v.22 no.1
• /
• pp.38-43
• /
• 2010

2010년 한해에도 가스산업에 많은 변화가 예상됩니다. 국내적으로는 LPG업계의 담합판정으로 비난 여론이 급등하고 있으며, 기존 LPG 공급지역에 도시가스 보급이 확대되면서 국내 프로판 수요는 감소세 등 LGP 시장이 위기를 맞고 있습니다. 그러나 정부와 LPG업계는 어려운 상황에서도 LPG 경쟁력확보와 소비자 부담 완화 차원에서 LPG시장 안정대책을 금년에도 지속적으로 추진할 것입니다.

• LP가스
• /
• s.73
• /
• pp.6-11
• /
• 2001

올해 LPG충전업계는 LPG가격자유화 실시, 판매업계-석화사의 용기충전업 진출, LPG용기관리 문제, 부탄 특소세 인상, 신규업소의 급증 등 제반 정책적변화와 함께 사업한경이 급변할 것으로 예상되어 그 어느때보다 중요한 시기가 될 것으로 예상된다. 이에 우리 협회는 LPG용기.자동차 충전업계의 현황 및 과제를 알아보고 우리 업계가 나아갈 방향성을 제시해본다.

• LP가스
• /
• s.66
• /
• pp.46-48
• /
• 2000

연구기간 : '99.1-9(9개월) 연구목표 : LPG자동차의 급격한 증가에 따른 LPG자동차 사고 예방을 위하여, LPG자동차 연료 장치 부품에 대한 성능 시험과 운행중인 자동차의 구조 및 누출 실태 점검을 통하여 LPG자동차 연료장치의 안전성 향상 방안을 제시함