• 제어로봇시스템학회:학술대회논문집
• /
• 1998.10a
• /
• pp.391-394
• /
• 1998

The man-machine interface Is an important factor in the computer system, and it is thought that line-of-sight (LOS) detection technology will allow significant advances in this field. Techniques for detecting LOS for use in human interfaces have been studied［1]［2］. In earlier studies, however, LOS was detected with a head piece, goggles, or through fixing the position of the head. The limitations imposed by these fixed conditions render them unsuitable far use in interfaces, as they have adverse mental or physical effects on humans. Therefore. they have not been sufficiently developed for practical application. Research on non-contact LOS detection is expected to result in a usable LOS man-machine interface［3］［4］, and the current study is intended to be a step in that direction. The authors used color contact lenses for LOS detection, and applied this new method to a computer interface. The use of color contact lenses simplifies image processing. The algorithm used in this study is sufficiently accurate for practical applications. This technique can be used in input devices, in virtual reality applications, and in human engineering research.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.5 no.3
• /
• pp.152-156
• /
• 2010

Non-line-of-sight (NLOS) propagation is one of the challenges in radio positioning. Distinguishing the transmission status of the communication as line-of-sight (LOS) or NLOS is of great importance for the wireless communication systems. This paper focuses on the identification of NLOS based on time-of-arrival (TOA) distance estimates and the received signal strength (RSS) measurements. We set a path loss threshold based on the joint TOA and RSS based NLOS detection method to determine LOS or NLOS. Simulation results show that the proposed method ensures the correct of detection for the LOS condition and can improve the NLOS identification for the weak noise and long distance.

• Smart Structures and Systems
• /
• v.5 no.4
• /
• pp.457-468
• /
• 2009

A novel approach for integrating active sensing data interrogation algorithms for structural health monitoring (SHM) applications is presented. These algorithms cover Lamb wave propagation, impedance methods, and sensor diagnostics. Contrary to most active-sensing SHM techniques, which utilize only a single signal processing method for damage identification, a suite of signal processing algorithms are employed and grouped into one package to improve the damage detection capability. A MATLAB-based user interface, referred to as HOPS, was created, which allows the analyst to configure the data acquisition system and display the results from each damage identification algorithm for side-by-side comparison. By grouping a suite of algorithms into one package, this study contributes to and enhances the visibility and interpretation of the active-sensing methods related to damage identification. This paper will discuss the detailed descriptions of the damage identification techniques employed in this software and outline future issues to realize the full potential of this software.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.4
• /
• pp.269-282
• /
• 2009

This paper presents a novel approach for Lamb wave based structural health monitoring(SHM) in honeycomb aluminum panels. In this study, a suite of three signal processing algorithms are employed to improve the damage detection capability. The signal processing algorithms used include wavelet attenuation, correlation coefficients of power density spectra, and triangulation of reflected waves. Piezoelectric transducers are utilized as both sensors and actuators for Lamb wave propagation. These SHM algorithms are built into a MatLab interface that integrates and automates the hardware and software operations and displays the results for each algorithm to the analyst for side by side comparison. The effectiveness of each of these signal processing algorithms for SHM in honeycomb aluminum panels under a variety of damage conditions is then demonstrated.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.5
• /
• pp.53-59
• /
• 2000

In this paper, considering configuration of the earth and environment of country, it is classified a radio propagation environment Multipath propagation measuring system based on PN code correlation detection method is built to study a wave propagation characteristics of 1.95GHz. Considering the characteristic artificial structure of country, Cihwa plant superintendent area has been selected for basic and accurate measurement a radio propagation characteristic. The experiments are carried out with respect to the RMS delay Spread and the received power in the two kind of geographical areas, LOS (Line of Sight) and N-LOS (Non Line of Sight). The measurement result of that received power of LOS area is -1.6∼-28.8dBm, RMS delay spread is 0.023㎲∼0.22㎲ and received power of N-LOS area is 16∼36.5dBm and RMS delay spread is 0.068∼0.37㎲.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.2
• /
• pp.315-321
• /
• 2011

Since the MB-OFDM(Multi-Band Orthogonal Frequency Division Multiplexing) is an ultra wideband communication system operated on ISM(Industrial, Scientific and Medical) band, DAA(Detect-And-Avoid) is required for co-existence with the other communication service. In this paper we propose the new detection algorithm based on decision-feedback, which shows faster convergence time and less complexity than previous works. The proposed algorithm detects interference above -20dB in AWGN(Additive White Gaussian Noise) and LOS(Line-Of-Sight) channel, and close to AWGN in non-LOS channel under appropriate channel clipping.

• Structural Engineering and Mechanics
• /
• v.17 no.3_4
• /
• pp.409-428
• /
• 2004

In this paper, a Holder exponent, a measure of the degree to which a signal is differentiable, is presented to detect the presence of a discontinuity and when the discontinuity occurs in a dynamic signal. This discontinuity detection has potential applications to structural health monitoring because discontinuities are often introduced into dynamic response data as a result of certain types of damage. Wavelet transforms are incorporated with the Holder exponent to capture the time varying nature of discontinuities, and a classification procedure is developed to quantify when changes in the Holder exponent are significant. The proposed Holder exponent analysis is applied to various experimental signals to reveal underlying damage causing events from the signals. Signals being analyzed include acceleration response of a mechanical system with a rattling internal part, acceleration signals of a three-story building model with a loosing bolt, and strain records of an in-situ bridge during construction. The experimental results presented in this paper demonstrate that the Holder exponent can be an effective tool for identifying certain types of events that introduce discontinuities into the measured dynamic response data.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.11a
• /
• pp.65-69
• /
• 2005

The theoretical propagation modes of radio waves in the area of Line of Sight(LOS) within Fresnel zone are searched for the available detection ranges in a Marine RFID (Radio Frequency Identification). The structural LOS model to Earth's curvature is proposed and, the calculation method of horizontal distance in a specific radio frequency is also considered in this work As studying results, it is found that the height of antenna to cover the detection ranges and the influences of detection ranges by weather environments can be analyse with the theoretical methods.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.11
• /
• pp.89-101
• /
• 2023

In order to prevent damages caused by cyber-attacks on nations, businesses, and other entities, anomaly detection techniques for early detection of attackers have been consistently researched. Real-time reduction and false positive reduction are essential to promptly prevent external or internal intrusion attacks. In this study, we hypothesized that the type and frequency of attack events would influence the improvement of anomaly detection true positive rates and reduction of false positive rates. To validate this hypothesis, we utilized the 2015 login log dataset from the Los Alamos National Laboratory. Applying the preprocessed data to representative anomaly detection algorithms, we confirmed that using characteristics that simultaneously consider the type and frequency of attack events is highly effective in reducing false positives and execution time for anomaly detection.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.219-225
• /
• 2014

The New efficient Mux-based scan latch cell design and scan test of LOS/LOC modes are proposed for detection of delay faults in digital logic circuits. The proposed scan cell design can support LOS(Launch-off-Shift) and LOC(Launch-off-Capture) tests with high fault coverage and low scan power and it can alleviate the problem of the slow selector enable signal and hold signal by supporting the logic capable of switching at the operational clock speeds. Also, it efficiently controls the power dissipation of the scan cell design during scan testing. Functional operation and timing simulation waveform for proposed scan hold cell design shows improvement in at-speed test timing in both test modes.