• 제목/요약/키워드: LOAD CELL

검색결과 1,188건 처리시간 0.028초

어류가 대량으로 입강했을 때의 선미 trawl의 warp 장력 (THE INFLUENCE OF CATCH VOLUME ON TRAWLER WARP TENSION)

  • 김차돌
    • 한국수산과학회지
    • /
    • 제2권2호
    • /
    • pp.173-178
    • /
    • 1969
  • (1) 1968년 6월 18일부터 7월 16일 사이에 일본수산청 어업조사선 Kaiyo-Maru에 승선 New Zealand 근해에서 trawl 실험을 행하였다. (2) 대형선미 trawl에 있어 예강초와 양강직전의 warp 장력간의 차는 입강어의 다과와는 상관이 없는 것 같다.

  • PDF

곤충 모방형 플래핑 날개의 공력특성에 관한 가로세로비 효과 (The Effect of Aspect Ratio on the Aerodynamic Characteristics of an Insect-based Flapping Wing)

  • 한종섭;장조원;전창수
    • 한국항공우주학회지
    • /
    • 제40권8호
    • /
    • pp.662-669
    • /
    • 2012
  • 생체 모방형 초소형비행체의 설계 파라미터를 해석하기 위해 플래핑 날개의 공력특성에 관한 가로세로비의 효과가 조사되었다. 실험 모델은 4절 링크로 구성되었으며, 낮은 레이놀즈수 조건을 갖는 수조 내부에서 구동되었다. 미세힘 측정용 방수 로드셀이 제작되어 아크릴로 만든 날개의 뿌리에 설치되었다. 날개 형상은 초파리의 날개 모양을 기준으로 하였다. 선택된 가로세로비는 각각 1.87, 3.74, 7.48이었으며, 레이놀즈수는 $10^4$에 고정되었다. 가로세로비 1.87과 3.74에서는 후류포획과 같은 비정상효과를 나타내는 뚜렷한 양력 피크가 스트로크 초기에 관찰되었다. 그러나 가로세로비 7.48의 경우 상기 비정상 효과는 관찰되지 않았다. 이러한 물리적 특징은 후행회전인 경우에서도 동일하게 관찰되었다. 이와 같은 결과는 MAV 설계에 적용할 수 있는 곤충 모방형태의 플래핑 날개인 경우 높은 가로세로비의 날개가 향상된 공력성능을 제공한다는 것을 의미한다.

관형막을 이용한 혐기소화조의 전처리 농축공정으로써 적용가능성 연구 (Application of tubular membrane to thickening process as a pre-treatment of anaerobic digester)

  • 강희석;박기태;박정우;김형수
    • 상하수도학회지
    • /
    • 제29권2호
    • /
    • pp.203-209
    • /
    • 2015
  • The purpose of this study is to estimate the applicability of a stable anaerobic digester using a separator membrane to the preprocessing thickening process. The results of the experiments showed about a 47.16% weight loss rate for the sludge under anaerobic condition, and about 41.17% under intermittent aeration condition. The concentrations of rejection water were $SCOD_{Cr}$ 25 mg/L, T-N 16.6 mg/L, and T-P 1.4 mg/L on the average under the intermittent aeration condition, which were lower than the concentrations of rejection water under an anaerobic condition. As for the factors affecting the reduction of the flux, correlation analyses of TTF, MLSS, $SCOD_{Cr}$, and $EPS_{Protein}$, $EPS_{Polysacchride}$ resulted in -0.97, -0.95, -0.84 and -0.86, -0.95, respectively, which showed that TTF had the highest correlation to the reduction of the flux. In addition, it was concluded that MLSS, $SCOD_{Cr}$ and $EPS_{Protein}$, $EPS_{Polysacchride}$ also have close correlations. The results are considered to show that, in the case of the process using a tubular membrane in the preprocessing process of an anaerobic digester, an intermittent aeration condition of the thickener considering the contamination of the membrane and load of rejection water is appropriate for the stable preprocessing process.

마이크로 컴퓨터를 이용한 식품가공(食品加工) 공정중(工程中)의 온도및 무게 측정용(測定用) Analog-digital 변환(變換)및 접속(接續) 시스템의 제작(製作) (Microcomputer-based Data Acquisition System for the Measurements of Temperature and Weight in Food Processing)

  • 최부돌;전재근
    • 한국식품과학회지
    • /
    • 제19권2호
    • /
    • pp.129-133
    • /
    • 1987
  • 마이크로컴퓨터를 식품가공 공정및 연구에서 자료수집및 제어에 응용하기 위하여 Apple ll 컴퓨터에 접속가능한 접속장치(接續裝置)를 설계 제작하였다. 또한 식품의 여러 공정에 주요한 변수가 되는 온도 및 무게값을 전기적 신호로 감지하는 센서와 A/D변환기(變換器)의 적정 입력전압범위 전환을 위한 증폭회로를 구성하였다. 이들을 연결시켜 필요한 BASIC어(語) 프로그램을 작성하여 식품건조 장치의 온도및 무게값의 측정장치로 활용 가능함을 보였다. 컴퓨터를 응용함으로써 공정자료의 정확성과 신뢰성을 향상시키고 여러가지 공정변수를 다량 수집할 수 있게되고 수집된 많은 자료를 용이하게 저장, 분석할 수 있었다. 본 실험장치에 여러가지 목적에 따라 필요한 측정 센서를 개발하여 부착(附着)함으로 비단 온도와 무게 측정뿐 아니라 제반(諸般)식품(食品)제조 공정과 실험의 자동화에 활용할 수 있는 기초적인 자료를 얻었다.

  • PDF

Development of a Real-Time Measurement System for Horizontal Soil Strength

  • Cho, Yongjin;Lee, Dong Hoon;Park, Wonyeop;Lee, Kyou Seung
    • Journal of Biosystems Engineering
    • /
    • 제40권3호
    • /
    • pp.165-177
    • /
    • 2015
  • Purpose: Accurate monitoring of soil strength is a key technology applicable to various precision agricultural practices. Soil strength has been traditionally measured using a cone penetrometer, which is time-consuming and expensive, making it difficult to obtain the spatial data required for precision agriculture. To improve the current, inefficient method of measuring soil strength, our objective was to develop and evaluate an in-situ system that could measure horizontal soil strength in real-time, while moving across a soil bin. Methods: Multiple cone-shape penetrometers were horizontally assembled at the front of a vertical plow blade at intervals of 5 cm. Each penetrometer was directly connected to a load cell, which measured loads of 0-2.54 kN. In order to process the digital signals from every individual transducer concurrently, a microcontroller was embedded into the measurement system. Wireless data communication was used between a data storage device and this real-time horizontal soil strength (RHSS) measurement system travelling at 0.5 m/s through an indoor experimental soil bin. The horizontal soil strength index (HSSI) measured by the developed system was compared with the cone index (CI) measured by a traditional cone penetrometer. Results: The coefficient of determination between the CI and the HSSI at depths of 5 cm and 10 cm ($r^2=0.67$ and 0.88, respectively) were relatively less than those measured below 20 cm ($r^2{\geq}0.93$). Additionally, the measured HSSIs were typically greater than the CIs for a given numbers of compactor operations. For an all-depth regression, the coefficient of determination was 0.94, with a RMSE of 0.23. Conclusions: A HSSI measurement system was evaluated in comparison with the conventional soil strength measurement system, CI. Further study is needed, in the form of field tests, on this real-time measurement and control system, which would be applied to precision agriculture.

AM, AEM 산화물들의 용융 LiC1에서의 분리 물성 측정 (Measurements of Separation Properties of AM, ARM Oxidesin Molten LiC1)

  • 오승철;박병흥;강대승;서중석;박성원
    • 한국방사성폐기물학회:학술대회논문집
    • /
    • 한국방사성폐기물학회 2003년도 가을 학술논문집
    • /
    • pp.363-367
    • /
    • 2003
  • 우라늄 산화물의 금속전환을 위해 고온 용융염 중에서 전기화학적 환원공정에 대한 관심이 고조되고 있다. 본 공정은 우라늄 산화물뿐만 아니라 다른 악틴족 원소 산화물 및 일부 희토류원소 산화물 역시 금속으로 환원되는 장점을 가지고 있다. 이러한 금속산화물들은 독창적으로 고안된 일체형 음극 및 불활성 양극을 이용하여 금속으로 환원되며, 음극에서 발생된 산소 이온은 양극으로 전달되어 산화됨으로서 산소기체를 발생시킨다. 용융염 중에서 알칼리 및 알칼리토류 산화물에 대한 전기화학적 거동은 아직 완전히 밝혀지지 않았으며, 후행핵연료주기의 단위공정으로서 개발중에 있다. 사용후핵연료의 열 부하는 주로 세슘 및 스트론슘에 의한 것으로, LiC1 용융염 중에서 세슘, 스트론슘 및 바륨 산화물에 대한 용해 속도 및 환원전위를 고찰하였다.

  • PDF

배양된 시경세포 관찰을 위한 초고압전자현미경 홀마운트 시료제작기법 (Whole Mount Preparation of Primary Cultured Neuron for HVEM Observation)

  • 김현욱;홍순택;오승학;박창현;김현;류임주
    • Applied Microscopy
    • /
    • 제41권1호
    • /
    • pp.69-73
    • /
    • 2011
  • High-voltage electron microscope (HVEM) has higher resolution and penetration power than conventional transmission electron microscope that could be load thick specimen. Some researchers have taken this advantage of HVEM to explore 3-dimensional configuration of the biological structures including tissue and cells. Whole mount preparations has been employed to study some cell lines and primary culture cells. In this study, we would like to introduce useful whole mount preparation method for neuronal studies. The plastic coverslips were punched, covered by formvar membrane and coated with carbon. The neurons obtained embryonic 18 rat hippocampus were seeded on the prepared cover slip. The coverslips were fixed, dried in freeze drier and kept in a descicator until HVEM observation. We could observe detailed neuronal structures such as soma, dendrite and spine under HVEM without conventional thin section and heavy metal stain. The anaglyphic image based on stereo paired image ($-8^{\circ},+8^{\circ}$) provides three dimensional perception of the neuronal dendrites and their spines. This method could be applied to sophisticated analysis of dendritic spine under the various experimental conditions.

화장품을 바를 때 피부 마찰계수의 변화와 주관적인 평가와의 상관관계 연구 (A study on correlation between frictional coefficients and subjective evaluation while rubbing cosmetic product on skin)

  • 권영하;권현준;랑문정;이수민
    • 감성과학
    • /
    • 제8권4호
    • /
    • pp.385-391
    • /
    • 2005
  • 화장품을 바를 때 피부와 손가락 사이에서 일어나는 마찰계수는 화장품의 주관적 평가에 많은 영향을 주는 요소이다. in-vivo상태에서 피부와 접촉자 간의 마찰계수는 접촉자의 모양이나 거칠기의 정도 그리고 누르는 하중에 따라 변할 수 있다. 본 실험에서는 리니어 모터와 다축 로드셀을 이용하여 여러 가지 접촉자를 in-vivo상태에서 직접 피부에 접촉시키고 실시간으로 마찰계수를 측정할 수 있는 장치를 개발하였다. 이 장치를 이용하여 피부와 접촉자 간의 마찰계수를 측정하고 그 데이터를 화장품을 바를 때의 전후와 비교$\cdot$분석하였다. 또한 화장품을 바를 때 주관적인 평가에서 이용되는 형용사를 조사하며 마찰계수와의 그 상관관계를 분석하였다. 그 결과, 피부와 접촉자 간의 마찰계수는 화장품의 종류와 접촉자의 성질에 따라 0.17-1.2사이에서 나타나며, 주관적인 평가 또한 화장품을 바른 후 시간의 경과함에 따라 변하며, 그것은 마찰계수와 관련이 있음을 확인할 수 있었다.

  • PDF

김치용 배추 절임 염수의 재사용 가능성 평가 (Evaluation of Brine Recycling on Salting of Chinese Cabbage for Kimchi Preparation)

  • 신동화;홍재식;오진아;안용선
    • 한국식품위생안전성학회지
    • /
    • 제15권1호
    • /
    • pp.25-29
    • /
    • 2000
  • 김치 공장에서 배추 절임시 사용하는 염수의 재사용 가능성을 확인하기 위하여 염지 후 배출되는 염수의 염농도를 재조정하여 6회까지 재 사용하면서 염수의 성분과 미생물 변화 및 매회 절임 배추로 담근 김치의 품질을 평가하였다. 배추 절임 후 염수의 염 농도는 1.35~2.49%감소하였고 재 사용횟수에 따라 절임 후 염수의 pH는 4회까지 유의적 변화를 보였고 절임 전 염수의 pH는 4회 까지는 통계적 유의차가 없었으며 산도도 절임 횟수에 따라 증가하는 경향을 보였다. 염수 중 미생물수는 1회 사용시 1.58$\times$10에서 4회 사용시 2.25$\times$$10^{7}$ 으로 최고에 달하여 10배정도 상승하였다. 염수 중 염을 제외한 순 가용성 고형분은 6회 사용시 0.93%로 미미하게 증가하는 경향이었고 비타민 C함량은 6회사용 후 0.55 mg%로 재사용 횟수에 따라 상승하는 경향을 보였다. 6회까지 염수를 재 사용하여 절임한 배추로 담근 김치의 pH와 산도, 그리고 관능적 품질은 유의적 차이를 보이지 않아 염수의 재 사용가능성을 확인하였다.

  • PDF

3상 시스템의 무효전력, 불평형 전류 보상 기능을 갖는 태양광 전력변환장치 설계 (Design of a Photovoltaic PCS with Compensation Control of Reactive Power and Unbalance Current in Three-phase systems)

  • 박상민;김창순;레딘브엉;박민원;유인근
    • 한국산업정보학회논문지
    • /
    • 제21권3호
    • /
    • pp.29-33
    • /
    • 2016
  • 청정에너지 발전설비의 요구가 늘면서 태양광, 풍력, 연료 전지 등의 분산전원 개발이 급속도로 증가하고 있다. 반면에 이러한 증가로 인하여 배전시스템은 복잡해지고 있으며 무효전력으로 인한 역률 저감, 불평형 부하에 의한 불평형 전류 등의 문제점을 가지고 있다. 이러한 문제점들을 해결하기 위하여 본 논문에서는 태양광용 3상 4선 타입의 전력변환장치에 무효전력, 불평형 전류를 보상하는 알고리즘을 적용하였다. 제안한 태양광 전력변환장치는 기본 출력동작 뿐만 아니라 계통 전력 품질의 저해요소들에 대해서 보상이 가능하며 PSCAD/EMTDC를 이용한 시뮬레이션을 통하여 그 성능을 검증하였다.