• 대한기계학회논문집A
• /
• 제40권12호
• /
• pp.1077-1085
• /
• 2016

선형 롤러베어링은 하중이 크고 정밀성이 요구되는 이송장치를 지지하기 위해 광범위하게 사용되는 기계요소이다. 본 논문에서는 외력을 받는 선형 롤러베어링의 변위를 계산하기 위한 새로운 모델링 방법을 제시하였다. 먼저 LM 블록을 강체로 가정하여 롤러와 LM 블록의 지배방정식을 유도하였고 Newton-Raphson법을 이용해 계산하였다. 롤러와 레이스 사이의 접촉하중은 롤러의 형상을 고려하여 슬라이싱 기법을 이용하여 계산하였다. 강체 LM 블록 모델에 의해 계산된 접촉하중을 활용하여 LM 블록의 구조적 변형을 유한요소 모델로부터 계산하였다. 최종적인 변위는 강체 LM 블록을 가정한 모델로부터 계산된 변위와 LM 블록 구조해석 결과를 조합하여 도출하였다. 제안된 방법에 의한 결과와 베어링 제작 업체 프로그램 결과와의 비교를 통해 제안된 방법을 검증하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.820-825
• /
• 2007

A ballscrew-linear motion(LM) guide is well-described by its name: it is a LM guide that runs by ballscrew. It consists of LM rail, LM block, end plate, screw, nut and bearing balls. The ballscrew-LM guide has many advantages compared with conventional LM guide. The high efficiency achieved with rolling contact devices permits the employment of antibacklash methods. The balls provide the only physical contact between nut rail and block and ball screw and nut replacing the sliding friction with a rolling motion. The life of the ballscrew-LM is determinated by the balls. The objective of this paper is to introduce the design of the ballscrew-LM with the safety working load.

• 한국기계기술학회지
• /
• 제13권1호
• /
• pp.95-103
• /
• 2011

Robots in various types carry and assemble parts through repeatedly and accurately moving to stored locations by combining linear motions. And, linear systems are used in orthogonal axes of robots and driven via ball screws, such as 2-axis cartesian coordinate robot in this paper. This paper presents the effect of the linear motion guide that is used in $2^{nd}$ axis in 2-axis cartesian coordinate robot. Some simulation results show that the linear motion guide influence greatly in robot performance such as the nominal life of linear guide. When use LM guide that have capacity near in $2^{nd}$ axis, this paper show that the nominal life on LM block of $1^{st}$ axis increases 37.4% and that the specification of $2^{nd}$ axis LM guide influences greatly the nominal life of $1^{st}$ axis LM block.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1270-1274
• /
• 2003

The objective of this paper is to introduce the standard of evaluation methods and fatigue test for linear motion rolling bearing. In particular, attention well be given to the list of evaluation and fatigue results in this paper. The life of a linear motion rolling bearing is given by the length of distance covered between the connection parts before the first evidence of fatigue develops in the material of one of the raceways of rolling elements. The main factors that contribute to fatigue failures include: Number of load cycles experienced; Range of stress experienced in each load cycle; Mean stress experienced in each toad cycle; Presence of local stress concentrations.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.692-695
• /
• 2000

This paper is concerned with Accuracy Design of LM Guide System in Machine Tools. Elastic deformation of bearing is calculated by Hertz contact theory and motion error of LM block is analyzed. A new algorithm using block stiffness is proposed fur the analysis of motion accuracy of the table. The best advantage of this algorithm is fast analysis speed because it isn't necessary iteration processes for satisfying equilibrium equation of the table. Motion errors of the table analyzed under artificial form error of rail theoretically and experimentally. Only one of two rails is bent by putting a thickness gauge into horizontal direction. This form error of rail is measured by gap sensor against the other rail. Then, motion errors of the table are predicted by proposed new algorithm theoretically and measured by laser interferometer. Measurements are carried out by changing the preload and thickness. The results show that the table motion errors are reduced from 1/2 to 1/60 times than form error of rail according to its height and width. And the effect of preloading is almost negligible.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.635-636
• /
• 2012

In the present work, investigations by high frequency resonance technique for diagnosis of defect frequencies of linear motion unit are reported. Raw vibration signature of the moving parts at different speeds of operation has been demodulated. Envelope detected spectrum is analyzed to evaluate various defect frequencies and their energy levels. Experimentally evaluated frequencies are compared with theoretically determined defect frequencies. These frequency values and their energy levels are used to monitor intrinsic condition of linear motion unit as well as to establish severity of existing/developed defects on the LM guide and inside the LM block. Relative comparisons of linear motion units of the same type are made at various operating speeds under identical conditions of operation on the basis of identified defect frequencies and severity of defects.

• 대한세포병리학회지
• /
• 제3권2호
• /
• pp.82-89
• /
• 1992

Electron microscopy (EM) can provide a valuable contribution to light microscopy (LM) In the Interpretation of fine needle aspiration cytology (FNAC) specimen, especially in the diagnosis of the tumor. However, considerable care in processing the specimen is mandatory to recover the cells and avoid altering the fine structures. We experienced a case of malignant melanoma in 33-yrs-old female, diagnosed by EM study of FNAC specimen from the axillary mass, who was initially thought as disseminated carcinomatosis on LM study. The technique of EM study on FNAC specimen consisted of washing the needle and syringe in 2.5% glutaraldehyde after a rapid stain (Diff-Quik), which was used to obtain a preliminary diagnostic impression and to assure the adequacy of the EM specimen. After centrifugation in the steps of fixation and dehydration, the sediment was made into an epon block and examined. The whole processing time of EM study can be shortened within 7 or 8 hours, and results can be available within 48 to 72 hours. Our experience suggests the EM study on FNAC can be a useful diagnostic method in the diagnosis of difficult FNAC cases.

• 한국도로학회논문집
• /
• 제6권2호
• /
• pp.15-24
• /
• 2004

산화는 아스팔트에서 대형분자(LMS : Large Molecular Size) 양의 증가를 야기하고 바인더의 경화에 주요 원인이 되므로 바인더 산화를 저감시키면 도로 및 공항 포장의 공용수명 연장을 기대할 수 있다. 바인더 산화는 혼합물을 도로에 깔기 전에 가열된 골재와 혼합하는 동안과 아스팔트 포장이 시공된 후 공용기간 동안에 일어난다. 본 연구에서는 바인더를 단기 및 장기노화 처리 후 LMS의 양적 증가를 HP-GPC (High-Pressure Gel-Permeation Chromatography)의 자료에 근거하여 해석하였다 개질 아스팔트는 LMS의 증가율이 아스팔트의 종류에 따라 다를 지라도 단기노화 후 LMS의 20-30%증가. 장기노화 후 2배 이상의 증가를 나타냈다. 본 연구에서 개질 아스팔트의 노화특성을 관찰하기 위하여 사용된 개질제는 선행 연구에서 큰 역학적 특성 향상을 보인 LDPE(Low-Density Polyethylene)와 SBS(Styrene-Butadiene-Styrene block copolymers) 를 사용하였다. LDPE로 개질한 바인더는 단 장기노화 후 LMS의 증가 비율이 상당히 낮았다. 이와 같이 낮은 LMS의 증가는 LDPE 개질 아스팔트가 노화 처리되는 동안에 일반 아스팔트보다 덜 노화가 진행된다는 것을 의미한다 이는 아스팔트 시멘트 내에 분산된 LDPE 입자가 산화 노화작용을 방해하기 때문인 것으로 보인다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.357-360
• /
• 1991

In this paper, we have introduced a network and showed how this can be realised as an adaptive equalizer. The walsh equlizer is built from a set of Walsh-Block pulse functions and LMS algorithms with the optimal convergence factor(C.F.). The convergence and the adaptation speed of this algorithms depends on the proper choice of a design factor $\mu$ called the C.F.. Conventional adaptation techniques use the fixed time constant C.F. by the method of trial and error. In this paper, we propose to adaptive C.F. which are optimally tailored to adapt C.F. in real time so that their values are kept optimum for a new set of input variables.

• Asian-Australasian Journal of Animal Sciences
• /
• 제32권12호
• /
• pp.1923-1932
• /
• 2019

Objective: We investigated visual marbling level (VML) influence on pork loin physicochemical traits, consumer palatability responses, VML liking, purchase intent, and their relationships. Methods: For each of five slaughtering dates, at 24-h postmortem, nine paired Duroc castrated male boneless Longissimus dorsi (LD) muscles were categorized into low (LM, score 1 to 2, n = 3), medium (MM, score 3 to 4, n = 3), and high (HM, score 5 to 6, n = 3) VML. Meat physicochemical quality traits and consumer responses (n = 389) on palatability and VML liking, and purchase intent were evaluated. The experiment was in randomized complete block design. Analysis of variance, Duncan's multiple mean comparisons, and correlation coefficients were determined. Results: VML correspond to crude fat (r = 0.91, p<0.01), but both were reversely related to moisture content (r = -0.75 and -0.91, p<0.01, respectively). As VML increased, ash (p<0.05) and protein (p = 0.072) decreased, pH and $b^{\star}$ increased (p<0.05), but drip, cooking (p<0.05) and thawing (p = 0.088) losses decreased. Among treatments, muscle fiber diameter, sarcomere length, total and insoluble collagen contents, $L^{\star}$, and $a^{\star}$ did not differ (p>0.05). Compared to the others, HM had lower collagen solubility percentage (p<0.05), but similar (p>0.05) Warner-Bratzler shear force (WBSF). No differences (p>0.05) were found in juiciness, overall flavor, oiliness, and overall acceptability, but HM was more tender (p<0.05) than the others. Based on VML, consumers preferred MM to HM (p<0.05), while LM was similar to MM and HM (p>0.05). Corresponding to VML preference (r = 0.45, p<0.01), consumers (83%) would (p<0.01) definitely and probably buy MM, over LM (74%), and HM (68%), respectively. Conclusion: Increasing VML in pork LD altered its chemical composition, slightly increased pH, and improved water holding capacity, thereby improving its tenderness acceptability. Marbling might reduce chewing resistance, as lower collagen solubility in HM did not impact tenderness acceptability and WBSF. While HM was rated as most tender, consumers visually preferred and would purchase MM.