• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.15 no.2
• /
• pp.87-91
• /
• 2004

Background and Objectives : Temporary vocal fold injection is not only performed to restore the laryngeal function in temporary unilateral vocal fold paralysis or paresis, but also performed as a test injection prior to the permanent injection. Gelfoam has been safely used for the past several decades for the temporary vocal fold augmentation. Recently, we found a new material, called Radieses Lite, may be used as a temporary injection material. Material and Methods : We report preliminary results of 11 patients who had Radiesse Lite injection with a variety of pathologies. Results : Based on the results from the 6 patients who completed follow-up, the duration of effectiveness of Radiesse Lite seems to be from 2 to 3 months depending on the injection amount. Radiesse Lite satisfies several requirements of the ideal temporary vocal fold injection material in terms of injectability, convenience, duration of effectiveness and safety. Conclusion : The authors concluded that Radiesse Lite might be a good option for temporary vocal fold injection especially in the office setting.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.1
• /
• pp.68-77
• /
• 2013

This paper presents AUTOSAR-ready light software architecture (AUTOSAR-Lite), which is a light weighted version of the AUTOSAR, for automotive embedded control systems. The proposed AUTOSAR-Lite reduces overhead problems caused by the excessive standard specifications of AUTOSAR. Concurrently, AUTOSAR-Lite keeps advantages of AUTOSAR such as a scalability, re-usability, reliability, and transferability. The fundamental design of AUTOSAR-Lite is originated from the AUTOSAR standard. AUTOSAR-Lite is composed of three layers such as an application software, runtime environment, and basic software layer. The application software layer adopts component-based design methodology as AUTOSAR. The runtime environment layer integrates interfaces between application and basic software layers. In case of the basic software layer, restrictions of the module configurations and interfaces of basic software are minimized. In order to validate the feasibility of AUTOSAR-Lite, a software design result based on AUTOSAR-Lite software architecture for electronic throttle control (ETC) system is suggested.

• Korean Journal of Poultry Science
• /
• v.38 no.1
• /
• pp.29-35
• /
• 2011

An experiment was conducted to investigate the effects of dietary supplementation of a silicate mineral (D Lite) on growth performance, nutrient retention, carcass characteristics and meat quality in broiler chicks. A total of 640 broiler chicks were randomly allotted to four dietary treatments in a randomized complete block design. Each treatment had four replicates comprising 40 broilers in each replicate. Dietary treatments were as follows: control (0% D Lite), and diets supplemented with 0.15%, 0.30% and 0.45% of D Lite. The starter and finisher diets were fed from d 0 to 21 and d 21 to 35, respectively. Body weight gain during starter (p<0.05), finisher (p=0.057) and overall (p<0.001) experimental period and feed intake (p<0.05) during starter period decreased quadratically with increasing dietary D Lite levels. The birds fed 0.15% D Lite showed the greatest (p<0.05) overall weight gain, feed intake and retention of gross energy and calcium. There were no differences (p>0.05) in carcass characteristics, organ weights and breast meat composition. However, as the level of D Lite was increased in the diet there was a linear decrease in the TBARS values of breast meat (p<0.05) at d 12 of storage. These results suggest that D Lite supplementation at the level of 0.15% is shown to be effective in improving performance and nutrient retention in broilers.

• Fibers and Polymers
• /
• v.7 no.4
• /
• pp.398-403
• /
• 2006

Dimensional constants (k values) of single jersey fabrics made from $LincLITE^{(R)}$ and conventional yams are calculated under dry, steam, full relaxation treatments. Fabrics were made under different tightness factors such as high, medium and low with different twist factors, twist directions and feeder blending. $LincLITE^{(R)}$ yarns made to get soft and bulkier effects with yam count of 39 tex and conventional yams made into 39 tex and 48 tex yam counts. Various effects on K values are analysed using correlation coefficients. K-values are increased with relaxation progression and have shown some differences between in $LincLITE^{(R)}$ and conventional fabrics, and feeder blended fabrics. Loop shape factor is highly affected by tightness factor, relaxation and feeder blending in $LincLITE^{(R)}$ fabrics, whereas twist factor not significantly effects on loop shape factor in conventional fabrics. Stitch density significantly increases with relaxation in conventional fabrics and no significant effect shows with $LincLITE^{(R)}$ fabrics.

• Journal of Korean Society of Transportation
• /
• v.34 no.2
• /
• pp.180-190
• /
• 2016

Atmospheric pollutants such as Nitrogen Oxides(NOx), Carbon Monoxide(CO), Carbon Dioxide($CO_2$), Particulate Matter(PM) and Hydrocarbons(HC) come from vehicle exhaust gases. Emission curves based on average travel speeds have been employed for estimating on-road emissions as well as evaluating environmental impacts of transportation plans and policies in Korea. Recently, there is a growing interest in estimation methods of vehicle emissions considering relationship between vehicle dynamic driving characteristics and emissions, and incorporating such emission estimators into traffic simulation models. MOVES Lite, a simplified version of MOVES, is one of the estimation methods. In this study, the authors performed a study to develop an adaptable version of MOVES Lite for Korea, called MOVES Lite-K. Vehicle types, driving characteristics, emission rates, and emission standards of Korea were reflected in MOVES Lite-K. The characteristics of emission calculation of MOVES Lite-K and NIER emission curves were compared and the adaptability of MOVES Lite-K were examined.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12C
• /
• pp.233-239
• /
• 2001

Among the operations in frequency domain for ADSL G.LITE Modem to perform, FFT and FEQ are most computation-intensive part, of which many researches have been focused on the efficient implementation. Previous papers suggested hardwares suitable for ADSL G.DMT system, which is not feasible for simple G.LITE system. The analysis of frequency domain operations and computational efficiency according to the allocation of hardware resources is performed in this paper. The suggested processor has the structure of one real multiplier and two real adders connected in parallel, which can perform the operations efficiently through the pipeline- and/or parallel-type job scheduling. The suggested processor uses less hardware resources than Kiss\`s ALU structure or FFT/IFFT processor suggested by Wang, so the suggested one is more suitable for G.LITE system than previous works.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.204-207
• /
• 2000

Verification is one of the most critical and time-consuming tasks in today's design process. This paper describes the basic idea of Co-verification and the environment setup for the design of DVD Servo with TeakLite DSP core by using Seamless CVE, Hardware/software Co-verification too1.

• Proceedings of the Korean Society of Embryo Transfer Conference
• /
• 2003.10a
• /
• pp.75-75
• /
• 2003

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.109.1-109.1
• /
• 2012

In the past few years, two-planet circumbinary systems (e.g., HW Vir, NN Ser, DP Leo and HU Aqr) have been detected around short-period eclipsing binaries using ground-based telescopes. The existence of these planets has been inferred by interpreting the O-C variations of the mid-eclipse times. We have tested the orbital stability of these systems and propose to use Light Travel Time Effect (LITE) to detect such circumbinary planets from the ground. We generated synthetically the LITE signal of a two-planet circumbinary system with the aim to apply an analytic LITE model to recover the underlying synthetic system. To mimic a degree of realism inherent to ground-based observations, we added to the synthetic LITE data white noise with a Gaussian distribution and sampled the synthetic LITE signal randomly. We successfully recovered the original system demonstrating that two-planet circumbinary systems can be detected using ground-based telescopes, provided the timing measurements of the mid-eclipses are sufficiently accurate and the observing baseline is long enough to ensure a sufficient coverage of all involved periods. We used HU Aqr as a test system and applied our model to its proposed planetary bodies considering near-circular orbits. We present the results of our calculations and discuss the LITE-detectability of a HU Aqr-like system.

• The KIPS Transactions:PartC
• /
• v.16C no.5
• /
• pp.653-660
• /
• 2009

A research for middleware of WSN can provide sensor applications with avoiding tight coupling of hardware, ease of development, and abstract data access. However, previous works have some limitations which should install their own middleware onto the all sensor nodes resulting in computational and communication overhead. In order to address it, we proposed a virtual sensor overlay network, called TinyONet-Lite which introduced virtual sensors to model a virtual counterpart of physical sensors. These virtual sensors dynamically grouped into an overlay network, Slice, which provides middleware services. We implemented TinyONet-Lite on mote class hardware with TinyOS. In accordance with experiments and comparison with existing researches, TinyONet-Lite was proved to show advantages of extensibility, dynamic service composition and reducing overhead.