• 공학교육연구
• /
• 제18권3호
• /
• pp.59-68
• /
• 2015

This study was implemented for the purpose of analyzing the effects of Engineering Education Accreditation. Now, 15 years has passed adopting the engineering education system. We need to analyze the effect that this system has changed on the ground of engineering education, and it cultivated the human resource. In order to achieve the purpose of this study, the survey were done on the professors, graduates, and workers. The results and conclusions of this study are summarized as follows: First, it is urgent need to change the system of accreditation, and to get the public trust on assessment. Second, it is necessary to make circumstance that engineering education accreditation is advertised to the industries, and the industry can join the development, consulting, evaluation of curriculum. Third, government needs to make the policy that gives the incentive to the industries, if they give some merits to the accreditation graduates. Fourth, certificate of program graduate is desired to spread the accreditation proliferation. Fifth, government should systemize that accreditation program can get advantage to be selected for the public finance business(e.g. BK, LINC).. It will impact the quality Improvement and accountability of engineering programs.

• 한국분말재료학회지
• /
• 제24권5호
• /
• pp.400-405
• /
• 2017

The addition of a large amount of alloying elements reduces the compactibility and increases the compacting pressure, thereby shortening the life of the compacting die and increasing the process cost of commercial PM steel. In this study, the characteristic changes of Fe-Mo-P, Fe-Mn-P, and Fe-Mo-Mn-P alloys are investigated according to the Si contents to replace the expensive elements, such as Ni. All compacts with different Si contents are fabricated with the same green densities of 7.0 and $7.2g/cm^3$. The transverse rupture strength (TRS) and sintered density are measured using the specimens obtained through the sintering process. The sintered density tends to decrease, whereas the TRS increases as the Si content increases. The TRS of the sintered specimen compacted with $7.2g/cm^3$ is twice as high as that compacted with $7.0g/cm^3$.

• 동력기계공학회지
• /
• 제18권2호
• /
• pp.50-56
• /
• 2014

Friction welding is a very useful joining process to weld metals which have axially symmetric cross section. In this paper, for the friction welding with tube-to-tube shape, the feasibility of industry application was determined using analyzing mechanical properties of weld and optimized welding variables was suggested. In order to accomplish this object, rotating speed, friction heating pressure, and friction heating time were selected as the major process variables and the experiment was performed in three levels of each parameter. Weld characteristic was investigated in terms of weld shape and metal loss, and 7mm of metal loss was regarded as the optimal metal loss. By tensile test, tensile strength and yielding strength was measured and fracture was occurred at base metal. In order to optimize the welding condition, fitness function was defined with respect to metal loss and yielding strength and the fitness values for each welding condition could be calculated in experimental range. Consequently, we set the optimal welding condition as the point which had maximum value of fitness function. As the result of this paper the optimal welding variables could be suggested as rotating speed was 1300 rpm, friction heating pressure was 15 MPa, and friction heating time was 10 sec.

• 동력기계공학회지
• /
• 제18권2호
• /
• pp.62-69
• /
• 2014

In this paper, in order to investigate the effects of marco and microscopic observations of fatigue crack growth in friction stir welded (FSWed) 7075-T651 aluminum alloy plates, fatigue crack growth tests were performed under constant amplitude loading condition at room temperature with three different pre-cack locations, namely base metal (BM-CL) and two kinds of pre-crack locations in welded joints, weld metal (WM-CL) and heat affected zone (HAZ-CL) specimens. The fatigue crack growth behavior of FSWed 7075-T651 aluminum alloy plates were discussed based on the marco and microscopic fractographic observations. The marcoscopic aspects of surface crack growth path for BM-CL and HAZ-CL specimens indicate relatively straight lines, however, the crack growth paths of WM-CL specimens grow first straight and by followed toward the TMAZ and HAZ. The microscopic aspects of fatigue fracture for BM-CL and HAZ-CL specimens indicate typical fatigue striation, but WM-CL showed intergranular fracture pattern by micro structural changes of FSW process.

• 동력기계공학회지
• /
• 제17권5호
• /
• pp.69-77
• /
• 2013

The purpose of this study is to improve the properties of epoxy resin using the big-sized titanium oxide nanoparticles. The effects of particle weight fraction and shape of sample on the thermal and mechanical properties in titanium oxide reinforced epoxy resin has been investigated. In addition, the effect of particle dispersion situation on the mechanical properties of nanocomposites has been studied. As a result, the Tg was almost same regardless of the content of nanoparticles. Storage modulus increased up to the content of 3wt% particles and then decreased. Tensile strength and modulus of film-shaped sample with 1wt% was higher than the one of pure epoxy, while other composites were not. The tensile strength of dogbone-shaped sample with 1wt% was only higher than the one of pure epoxy, while other composites were lower than the one of pure epoxy. Tensile modulus of dogbone-shaped samples increased with the content of particles.

• 한국표면공학회지
• /
• 제49권6호
• /
• pp.498-506
• /
• 2016

Electrochemical measurement using a LSCF6428 electrode was performed to estimate the oxygen potential gradient in the electrode layer and a long time stability test was performed by applied potential to learn the overpotential effect on the LSCF6428 electrode. By fitting the observed impedance spectra, it was obtained that the amount of faradic current decreased with distance from cathode/electrolyte interface. Oxygen potential gradient was estimated to occur within 1 um region from the cathode/electrolyte interface at an oxygen partial pressure of 10-1 bar. The segregation of cation rich phases in the LSCF6428 electrode suggests that kinetic decomposition took place. However, impedance response after applying the potential showed no changes in the electrode compared with before applying potential. The obtained results suggest that segregation of a secondary phase in a LSCF6428 cathode is not related to performance degradation for solid oxide fuel cells (SOFCs).

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2018년도 춘계학술발표회
• /
• pp.5-5
• /
• 2018

Ginseng (Panax ginseng C.A. Meyer), one of the most widely used medicinal plants in traditional oriental medicine, is used for the treatment of various diseases. It has been classified according to its cultivation environment, such as field cultivated ginseng (FCG) and mountain cultivated ginseng (MCG). However, little is known about differences in gene expression in ginseng roots between field cultivated and mountain cultivated ginseng. In order to investigate the whole transcriptome landscape of ginseng, we employed High-Throughput sequencing technologies using the Illumina HiSeqTM2500 system, and generated a large amount of sequenced transcriptome from ginseng roots. Approximately 77 million and 87 million high-quality reads were produced in the FCG and MCG roots transcriptome analyses, respectively, and we obtained 256,032 assembled unigenes with an average length of 1,171 bp by de novo assembly methods. Functional annotations of the unigenes were performed using sequence similarity comparisons against the following databases: the non-redundant nucleotide database, the InterPro domains database, the Gene Ontology Consortium database, and the Kyoto Encyclopedia of Genes and Genomes pathway database. A total of 4,207 unigenes were assigned to specific metabolic pathways, and all of the known enzymes involved in starch and sucrose metabolism pathways were also identified in the KEGG library. This study indicated that alpha-glucan phosphorylase 1, putative pectinesterase/pectinesterase inhibitor 17, beta-amylase, and alpha-glucan phosphorylase isozyme H might be important factors involved in starch and sucrose metabolism between FCG and MCG in different environments.

• 디지털융복합연구
• /
• 제18권4호
• /
• pp.129-135
• /
• 2020

본 연구는 K-POP의 킬러컨텐츠가 아시아를 넘어 전 세계에서 주목받고 있는 현상에 중점을 두고 있으며 다른 문화 속에서 K-POP이 성공할 수 있는 요인을 분석하고 그 중 소셜미디어를 비롯한 스마트미디어 환경의 변화가 글로벌시대에 미치는 영향력을 탐색하여 K-POP의 지속가능 방안을 분석하였다. 또한 국내외 실감컨텐츠 관련 제작사례를 탐구하여 K-POP의 잠재적인 지표 및 그에 따른 시장을 분석하고 컨텐츠 제작자, 플랫폼사업자, 네트워크 사업자, 가전사 등 효율적인 생태계 구축과 비즈니스 모델을 통해 K-POP의 지속확대 방안을 제시하였다. 이를 통해 지속가능한 K-POP한류의 가능성을 확인하고 지속 발전할 수 있는 대안을 제시하였다.

• 패션비즈니스
• /
• 제16권6호
• /
• pp.127-143
• /
• 2012

This study aims to derive the sensitive image analysing the color tones based on the web-sites of cosmetic brand and to know how the web-site color tones and the color tone image as visual factor for information transfer do influence the effective communication. 10 cosmetic brand web-sites are selected based on the pre survey, and the main page color tones of cosmetic brand web-site are analyzed by Color Catch and Munsell Conversion program, whereas the composition of color tones and color image such as the main trend colors, secondary colors, accent colors and etc are analyzed by a graphic professional program 'Adobe Photoshop'. 5 color tone groups are classified as Black&White, Green&White, Blue&White, Purple&White and Red&White according to the color distribution chart, and the emotional language is derived applying them to the pre research and IRI image scale. The color association is empirically analyzed by a survey method. The study results finally show Black&White is proper for expression of high quality and modern image, Green&White for pure and clean image, Blue&White for cool and transparent image, Purple&White for mysterious and elegant image respectively. This study results are necessary for plan of color delivering the strong transferring power of visual information the time when to make the effective web-sites, and it hopefully will be utilized as the basic data for the color marketing to actively express the brand identity and to satisfy the consumers' sensitivity.

• 폴리머
• /
• 제37권6호
• /
• pp.753-763
• /
• 2013

동종 혹은 이종의 고분자를 레이저로 접착시키는 방법은 레이저 접착이 가지는 장점들로 인해 많은 산업분야에서 광범위하게 사용되고 있다. 산업적으로 많이 사용되는 폴리프로필렌(PP)과 폴리카보네이트(PC)가 레이저 투과용접이 가능하다면 자동차 헤드램프에 큰 이점을 갖고 적용할 수 있을 것이다. 하지만, 폴리프로필렌과 폴리카보네이트는 상용성이 낮아 레이저 접착을 시켜도 강도가 낮은 문제점이 있다. 본 연구에서는 반응압출을 통해 폴리프로필렌을 글리시딜메타크릴레이트(GMA)로 개질하고, 폴리카보네이트와의 상용성, 기계적 물성 및 레이저 투과 용접을 통해 접착성을 조사하였다.