• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.666-668
• /
• 2000

The LIMs performance on-line monitoring system is proposed by using LabVIEW software and A/D board. The on-line monitoring system set-up can measure input voltage. current, power, power factor, electromagnetic thrust, and efficiency etc. This paper reports data on LIM performance measured by the proposed on-line monitoring system.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10a
• /
• pp.6-10
• /
• 2006

마이크로어레이 실험의 등장으로 한 번에 수백 개에서 수천 개의 유전자를 실험할 수 있게 되었다. 이는 기존의 실험과 비교했을 때 질적인 측면과 양적인 측면에서 가히 혁신적이라 할 수 있다. 마이크로어레이 칩을 이용한 실험에서 쏟아져 나오는 엄청난 데이터를 비교, 분석, 관리하기 위해서는 실험실의 마이크로어레이 분석 소프트웨어나 시스템간의 데이터 형식이 호환되어야 하며, 소프트웨어의 지원 또한 획기적이고 효율적이어야 한다. 본 논문에서는 다양한 종류의 마이크로어레이 입력 데이터 및 분석 데이터를 다룰 수 있고, 표준 파일 형식으로의 변환 기능을 제공하며, 마이크로어레이 이미지 분석용 소프트웨어인 ArrayMall[1,2]과 유전자 조절 네트워크 분석 시스템인 GENAW[3]를 통합하고 마이크로어레이 실험데이터의 분석, 관리 및 데이터 공유를 위한 분산 시스템인 SMILE[4]에 대해 소개한다.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.1
• /
• pp.32-37
• /
• 1997

We have built a laser ionization mass spectrometer (LIMS) for chemical composition analysis of solid samples, which employs an Nd:YAG laser and a time-of-flight mass analyzer. In this spectrometer, the maximum mass we identified clearly is higher than 2000 amu. A mass resolution of 230 has been achieved at m/z 208 (Pb element) in the linear TOFMS and can be even improved up to 1550 by employing a reflectron. The detection limit is determined to be on the order of ppm for Fe and In. The depth resolution is found to be about 20Å/spectrum with a laser power of 0.5 J/cm2. We also report a preliminary application of the LIMS to identifying impurities resident in several solid samples.

• Proceedings of the KSR Conference
• /
• 2006.11a
• /
• pp.181-188
• /
• 2006

Outline of design procedures of Linear Induction Motor (LIM) for transit vehicle applications are presented. The design steps are based on the classical design method. Constrains specific for transit applications are discussed. Heuristic data obtained from the various LIMs are utilized to streamline the presented design steps.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.6
• /
• pp.2935-2937
• /
• 2014

Studies of the causes of cancer, early detection, prevention or treatment need accurate, comprehensive, and timely cancer data. The clinical laboratory provides important cancer information needed for physicians which influence clinical decisions regarding treatment, diagnosis and patient monitoring. Poor communication between health care providers and clinical laboratory personnel can lead to medical errors and wrong decisions in providing cancer care. Because of the key impact of laboratory information on cancer diagnosis and treatment the quality of the tests, lab reports, and appropriate lab management are very important. A laboratory information management system (LIMS) can have an important role in diagnosis, fast and effective access to cancer data, decrease redundancy and costs, and facilitate the integration and collection of data from different types of instruments and systems. In spite of significant advantages LIMS is limited by factors such as problems in adaption to new instruments that may change existing work processes. Applications of intelligent software simultaneously with existing information systems, in addition to remove these restrictions, have important benefits including adding additional non-laboratory-generated information to the reports, facilitating decision making, and improving quality and productivity of cancer care services. Laboratory systems must have flexibility to change and have the capability to develop and benefit from intelligent devices. Intelligent laboratory information management systems need to benefit from informatics tools and latest technologies like open sources. The aim of this commentary is to survey application, opportunities and necessity of intelligent clinical laboratory as a tool to increase cancer care management productivity.

• Geophysics and Geophysical Exploration
• /
• v.14 no.4
• /
• pp.335-341
• /
• 2011

Most sensing and instrumentation systems should have very higher sampling rate than required data rate not to miss important information. This means that the system can be inefficient in some cases. This paper introduces two new research areas about information acquisition with high accuracy from less number of sampled data. One is Compressed Sensing technology (which obtains original information with as little samples as possible) and the other is Super-Resolution technology (which gains very high-resolution information from restrictively sampled data). This paper explains fundamental theories and reconstruction algorithms of compressed sensing technology and describes several applications to geophysical exploration. In addition, this paper explains the fundamentals of super-resolution technology and introduces recent research results and its applications, e.g. FRI (Finite Rate of Innovation) and LIMS (Least-squares based Iterative Multipath Super-resolution). In conclusion, this paper discusses how these technologies can be used in geophysical exploration systems.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.5
• /
• pp.630-638
• /
• 2021

In this study, we investigated the effects of dissolved inorganic and organic nutrient on the growth of dinoflagellate Alexandrium affine (LIMS-PS-2345). The maximum uptake rates (ρ_max) and half saturation constants (Ks) calculated from the uptake kinetics experiment were 77.0 pmol/cell/hr, 17.6 μM for nitrate and 15.5 pmol/cell/hr, 3.88 μM for phosphate, respectively. These results suggested that this species has high inorganic nutrient demand and a low affinity for inorganic nutrients. During the utilization of organic nutrients for A. affine, growth rates of experimental groups added by organic nitrogen (urea and glycine) and phosphorus (adenosine triphosphate and glycerol phosphate) were above 70 %, compared to the experimental groups added by inorganic nutrients. Thus, A. affine may need to utilize organic nutrients to understand the dominant strategy and advantageous position in the interspecific competition within low inorganic nutrient environments.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1160-1164
• /
• 2001

The input voltage of linear Induction motors(LIMs) is involved with the time harmonics because most LIM is driven by inverter. Therefore the equivalent circuit for an inverter-fed LIM has to be modifided to represent every harmonic present in supply voltage. This paper describes that the dynamic characteristic can be used effectively for analyzing the characteristics of a linear induction motor position and speed control.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.79-80
• /
• 2015

This paper deal with the structure and the operating characteristics of the two-dimensional elevator system and the concept that supports to the circuit design for the driving control of the LIM in the simplest possible way. The Horizontal Axis, The Vertical Axis, that is to say, designed a motor that can move between two dimensions by using two of LIMs, especially this control system was described by a sequence control design drawing. The body of this paper has shown the characteristics and validity of this control design system and also analyzed how to apply operating characteristics of the LIM in the elevator industry.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.2023-2029
• /
• 2009

The PRT can be divided into In-Track and On-Board according to propulsion method. In process of In-Track, vehicles driven by LIMs(Linear Induction Motor) which are installed in Guideway. Central Controller, which control whole machine, must control speed and direction of all vehicles. In this case, as vehicle increases, Central Controller will overload. If Central Controller fails, all vehicle stops. To avoid this problem, processing of Central Controller must be distributed. This paper introduces method of Distributed Routing. Method of Distributed Routing will provide safety and efficiency for PRT System.