• Resources Recycling
• /
• v.10 no.6
• /
• pp.9-14
• /
• 2001

A sulfuric acid leaching of $LiCoO_2$as cathodic active materials of lithium ion secondary batteries was investigated in terms of reaction variables. In the absence of a reducing agent, the extraction of cobalt was less than 40% in 2 M sulfuric acid at $75^{\circ}C$ instead of that of lithium could be almost 100% in the same conditions. To improve the Co extraction, hydrogen peroxide was used as a reducing agent in the range 2~20 vol%. When over 10vo1% hydrogen peroxide was added, the extractions of both metals were improved to about 95%. It seems to be due to the reduction of Co(III) to Co(II) that can be readily dissolved. The extractions of Co and Li were increased with increasing $H_2$$SO_4$concentration and temperature, and amount of hydrogen peroxide and with decreasing of pulp density. The optimum leaching conditions were determined at $2 M H_2$$SO_4$concentration, $75^{\circ}C$ operating temperature, 100 g/L. initial pulp density, 20 vol% $H_2$$O_2$addition and 30 min.

• Journal of the Korean Electrochemical Society
• /
• v.1 no.1
• /
• pp.14-17
• /
• 1998

Mesophase pitch-based carbon fibers(MPCF) have been investigated as an anode active material for lithium ion secondary battery. Graphitized MPCF gives high discharge capacity and good Ah efficiency. MPCF/Li cell shows an initial discharge capacity of 300 mAh/g and Ah efficiency above $90\%$ at a current density of 25 mA/g at $0\~1$ V. Cylindrical lithium ion secondary battery was fabricated using mixed carbon anode and $LiCoO_2$, cathode. In order to improve the cyclability of lithiun ion secondary battery, other carbons were added to the MPCF up to $10wt\%$. The cycle performance of lithium ion secondary battery using mixed carbons was superior to those using graphitized MPCF.

• Journal of Trauma and Injury
• /
• v.34 no.1
• /
• pp.44-49
• /
• 2021

Purpose: The aim of this study was to elucidate the prognosis, and other clinical features, such as time to surgery and the amount of transfusion, of small bowel injury (SBI) accompanied by liver injury (LI). Methods: We investigated 221 patients with SBI who visited an emergency center from October 2000 to March 2019. We excluded patients with injuries that directly led to mortality, and the remaining 149 patients were divided into the SBI alone (SBI-A) group and the SBI accompanied by LI (SBI-LI) group. Data were collected for preoperative and surgical outcome variables, and the treatment results were compared between groups. Results: The SBI-LI group had a higher mortality rate than the SBI-A group (22.4% vs. 14.3%), but this difference was not statistically significant (p=0.061). There were no significant differences between the SBI-A and SBI-LI groups, except for the amount of red blood cell (RBC) transfusion (SBI-A: 3.53±0.1 vs. SBI-LI: 8.38±0.7 packs, p=0.035) and the length of intensive care unit (ICU) stay (SBI-A: 6.7±0.2 vs. SBI-LI: 11.1±0.5 days, p=0.047). Conclusions: The SBI-LI group required more RBC transfusions and longer ICU stays than the SBI-A group. SBI accompanied by LI may show higher mortality than SBI alone; however, since the difference was not statistically significant in the present study, larger-scale follow-up research is needed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.8
• /
• pp.1080-1087
• /
• 2008

Lipopolysaccharide binding protein (LBP) and CD14 protein play important roles in the defense against infection of Gram-negative bacteria. In the present study, tissue distribution and polymorphism of porcine LBP and CD14 genes were analyzed. Real-time PCR results showed that the porcine LBP gene was especially highly expressed in liver, while CD14 gene was highly expressed in liver and spleen tissues. A 1,732 bp cDNA fragment of porcine LBP gene and a 1,682 bp genomic DNA fragment of CD14 gene were isolated. Polymorphisms were identified in these two fragments and showed that there were 14 potential SNPs in the porcine LBP gene and 3 potential SNPs in the porcine CD14 gene. Three SNPs, 292G/A (Gly/Ser), 1168G/A (Ala/Thr) of the LBP gene and -61G/A of the CD14 gene, were genotyped using restriction fragment length polymorphism (RFLP) method. Association analyses indicated that polymorphism of the 292G/A locus was significantly associated with porcine immune traits hematocrit (HCT), IgG and delayed-type hypersensitivity (DTH) (p<0.01), and the 1168G/A locus was significantly associated with HCT and mean corpuscular volume (MCV) traits (p<0.05). No significant association was found between the -61G/A locus and immune traits of the pig. Our data indicated that the LBP gene was significantly associated with immune traits of pig. Also, we identified some SNPs which may be useful markers for disease-resistant breeding of pigs.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.6
• /
• pp.3499-3502
• /
• 2013

MicroRNAs (miRNAs) are a class of endogenously expressed small, non-coding, single-stranded RNAs that negatively regulate gene expression, mainly by binding to 3'- untranslated regions (3'UTR) of their target messenger RNAs (mRNAs), which cause blocks of translation and/or mRNA cleavage. Recently, miRNAprofiling studies demonstrated the microRNA-497 (miR-497) level to be down-regulated in all prostate carcinomas compared with BPH samples. The purpose of this study was to investigate the potential role of miR-497 in human prostate cancer. Proliferation, cell cycle and apoptosis assays were conducted to explore the potential function of miR-497 in human prostate cancer cells. Results showed that miR-497 suppressed cellular growth and initiated G0/G1 phase arrest of LNCaP and PC-3 cells. We also observed that miR-497 increased the percentage of apoptotic cells by increasing caspase-3/7 activity. Taken together, our results demonstrated that miR-497 can inhibit growth and induce apoptosis by caspase-3 activation in prostate cancer cells, which suggest its use as a potential therapeutic target in the future.

• Korean Journal of Materials Research
• /
• v.14 no.7
• /
• pp.505-510
• /
• 2004

The glass-ceramic based on LAS($Li_{2}O-Al_{2}O_3-SiO_{2}$) system was observed using SEM(Scanning Electric Microscopy) and AFM(Atomic Force Microscopy) and it was expected to get a correlation between the crystal size and the surface roughness through the result. At heat treatment conditions (the nucleation: $740\~800^{\circ}C$, the crystal growth: $900\~1150^{\circ}C$), the crystal size was increased from 72 to 450 nm so that the mean of surface roughness was also risen from 0.8 to 6.3 nm. Based on the results, the surface roughness of glass-ceramic is controlled by the factors, crystal size, crystallines, and the condition of heat treatment.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.14 no.4
• /
• pp.125-134
• /
• 2018

Lamport firstly suggested password base authentication scheme and then, similar authentication schemes have been studied. Due to the development of Internet network technology, remote user authentication using smart card has been studied. Li et al. analyzed authentication scheme of Chen et al. and then, Li et al. found out the security weakness of Chen et al.'s scheme such forward secrecy and the wrong password login problem, and proposed an a new smart card based user password authentication scheme. But Liu et al. found out that Li et al.'s scheme still had security problems such an insider attack and man-in-the-middle attack and then Liu et al. proposed an efficient and secure smart card based password authentication scheme. This paper analyzed Liu et al.'s authentication and found out that Liu et al.'s authentication has security weakness such as no perfect forward secrecy, off-line password guessing attack, smart-card loss attack, and no anonymity. And then, this paper proposed security enhanced efficient smart card based password authentication scheme using fuzzy extraction technology.

• Journal of the Mineralogical Society of Korea
• /
• v.22 no.1
• /
• pp.63-72
• /
• 2009

Carbon-coated lithium iron phosphate ($LiFePO_4/C$) composites are synthesized by the modified mechanical activation method (modified MA process) and studied by the Rietveld structural refinement. Rietveld indices of $LiFePO_4/C$ indicate good fitting with $R_p=8.14%,\;R_{wp}=11.1%,\;R_{exp}=9.09%,\;R_B=3.88%$, and S (GofF, Goodness of fit) = 1.2, respectively. $LiFePO_4/C$ with a space group Pnma shows a = 10.3229(3)${\AA}$, b = 6.0052(2) ${\AA}$, c = 4.6939(1) ${\AA}$, and V = 290.98(1) ${\AA}^3$ in dimension, indicating good agreements with those of previous works. Synthetic powders are nano-sized ($65{\sim}90nm$) homogeneous particles with high purity. Thus the modified MA method will be an efficient process to get a high quality cathode material for commercial lithium batteries.

• Research in Plant Disease
• /
• v.9 no.4
• /
• pp.237-241
• /
• 2003

Damages caused by infection with Cucumber mosaic virus (CMV), Lily mottle virus (LMoV) and Lily symptomless virus (LSV) were assessed by comparing growth of plants produced from seeds of Lilium x fomolongi cultivar 'Noesan' both infected and free from infection with those viruses. Symptoms and infection rate were investigated in field-grown lily.Dominant viral infection symptom in the field was mottle on leaves, caused by natural infection with LMoV. Incidence of viral disease caused by mixed infection with two of LMoV, CMV and LSV in field-grown Lilium x fomolongi cultivars, reused for more than 6 years consecutively, was 80 percent. In comparison with healthy Lilium x fomolongi cultivar 'Noesan', plants doubly infected with CMV-Li1 and LMoV-Li diminished their plant height by 14 percent, fresh weight by 38 percent, and flower length by 15 percent. Lily plants singly infected with CMV-Li1 or LMoV-Li significantly reduced their freish weight by 21.8% and 28.4% compared to healthy plants, respectively.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_4
• /
• pp.1155-1164
• /
• 2023

Currently, the National Forest Inventory (NFI) collects tree information by human, so the range and time of the survey are limited. Research is actively being conducted to extract tree information from a large area using aerial Light Detection And Ranging (LiDAR) and aerial photographs, but it does not reflect the characteristics of forest areas in Korea because it is conducted in areas with wide tree spacing or evenly spaced trees. Therefore, this study proposed a methodology for generating Digital Surface Model (DSM), Digital Elevation Model (DEM), and Canopy Height Model (CHM) images using aerial LiDAR, extracting the tree height through the local Maxima, and calculating the Diameter at Breath Height (DBH) through the DBH-tree height formula. The detection accuracy of trees extracted through the proposed methodology was 88.46%, 86.14%, and 84.31%, respectively, and the Root Mean Squared Error (RMSE) of DBH calculated based on the tree height formula was around 5cm, confirming the possibility of using the proposed methodology. It is believed that if standardized research on various types of forests is conducted in the future, the scope of automation application of the manual national forest resource survey can be expanded.