• The Journal of Internal Korean Medicine
• /
• v.21 no.1
• /
• pp.7-12
• /
• 2000

Objectives : This studies were performed to investigate the correlation between the treatment effects and the changes of the thermal differences at the pre and post-treatment by using the digital infrared computer thermographic imaging (D.I.T.I) to the irritable colon syndrome 30 patients. Methods : The extracts of the gwakhyangjunggisan were administerd to the patients by oral method three times per day during four weeks. we selected the Chung-Wan($CV_{12}$), Chunchu($S_{25}$). Hapkok($LI_4$), Naegwan($P_6$), Yongdo($H_4$) acupoints and treated the patients two times per week during four weeks. One week later, we investigated the changes of the pressure pain around left side Pokkyol($SP_{14}$), the symptoms. and the skin temperature changes on Pokkyol($SP_{14}$) and Kimun($LR_{14}$) around, by using the D.I.T.I. Results : In the correlation between the severity of the pressure pain around left side Pokkyol($SP_{14}$) and the thermal differences on Pokkyol($SP_{14}$) and Kimun($LR_{14}$) around, before the treatment, the more the pain was severe, the more the skin temperature was differential significantly. In the correlation between the severity of the symptoms and the thermal differences on Pokkyol($SP_{14}$) and Kimun($LR_{14}$) around, before the treatment, the more the symptom was severe, the more the skin temperature was differential significantly. In the changes of the pressure pain around left side of Pokkyol($SP_{14}$), the improved were significantly higher than the unimproved. In the changes of the symptoms, the improved were significantly higher than the unimproved. In the correlation between the changes of the pressure pain around left side Pokkyol($SP_{14}$) and the changes of the thermal differences at the pre and post- treatment, the more the pain was improved, the more the thermal change was widened significantly. In the correlation between the changes of the symptoms and the changes of thermal differences at the pre and post-treatment, the more the symptom was improved. the more the thermal change was widened significantly. Conclusions : Above the results, the treatments was effective and the digital infrared computer thermographic imaging (D.I.T.I) was useful to prove the improvements of the pressure pain and the symptom with the irritable bowel syndrome patients.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.335-338
• /
• 2005

In this paper, we propose a downlink power control scheme to apply in the unequal error protection multi-code CDMA mobile medicine system. The mobile medicine system contains (i) blood pressure and body temperature measurement value, (ii) ECG medical signals measured by the electrocardiogram device, (iii) mobile patient's history, (iv) G.729 audio signal, MPEG-4 CCD sensor video signal, and JPEG2000 medical image. By the help of the multi-code CDMA spread spectrum communication system with downlink power control scheme and unequal error protection strategy, it is possible to transmit mobile medicine media and meet the quality of service. Numerical analysis and simulation results show that the system is a well transmission platform in mobile medicine.

• Journal of the Korean Society of Combustion
• /
• v.16 no.4
• /
• pp.38-45
• /
• 2011

Coal-derived syngas has been utilized by main fuel at IGCC power plant. Research efforts for investigating the characteristics of premixed and nonpremixed flames at gas-turbine condition have been conducted. The present study has been mainly motivated to evaluate the capability of the detailed chemical kinetics to predict the syngas laminar flame speed. Special emphasis is given to the effects of pressure, temperature, syngas composition, and dilution level on the characteristics of premixed and nonpremixed flames. The predicative capability of a number of detailed mechanism for laminar flame speed is compared to experimental data. From these results, detailed kinetics of Davis et al. and Li et al. have the best conformity with the experiments in the all the case of parametric studies.

• Nuclear Engineering and Technology
• /
• v.52 no.7
• /
• pp.1452-1461
• /
• 2020

A triple bubbler sensor was tested in LiCl-KCl molten salt from 450 to 525 ℃ in a transparent furnace to validate thermal-expansion corrections and provide additional molten salt data sets for calibration and validation of the sensor. In addition to these tests, a model was identified and further developed to accurately determine the density, surface tension, and depth from the measured bubble pressures. A unique feature of the model is that calibration constants can be estimated using independent depth measurements, which allow calibration and validation of the sensor in an electrorefiner where the salt density and surface tension are largely unknown. This model and approach were tested using the current and previous triple bubbler data sets, and results indicate that accuracies are as high as 0.03%, 4.6%, and 0.15% for density, surface tension, and depth, respectively.

• Journal of the Korean Ceramic Society
• /
• v.53 no.6
• /
• pp.647-651
• /
• 2016

SiC films were prepared on glassy carbon substrates by laser chemical vapor deposition under a high pressure of $10^4Pa$ using a diode laser (wavelength = 808 nm) and a polysilaethylene precursor. (111)-oriented SiC films were formed at a deposition temperature ($T_{dep}$) range of 1150 - 1422 K. At $T_{dep}=1262K$, the SiC film with a high Lotgering factor of above 0.96 showed an exhibited pyramid-like surface morphology and flower-like grains. The highest deposition rate ($R_{dep}$) was $220{\mu}m\;h^{-1}$ at $T_{dep}=1262K$.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2310-2315
• /
• 2008

In this paper, study on performance analysis of bubble pump on the domestic solar water heater system is presented. Device of this experiment is consisted of bubble pump, solar collector and heat exchanger. At the mean time, this system have attached temperature sensors and pressure sensors at bubble pump. In addition, the flow meter was installed at outlet of heat exchanger. And then result of experimental study, average value of the heat exchange amount in heat exchanger was about 7.9kcal/hr, the maximum value of the heat amount in water tank($0.4m^3$) was 489.7kcal/hr and the maximum value of the mass flow rate in bubble pump was about $0.5{\ell}/min$.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.16 no.4
• /
• pp.137-144
• /
• 2008

This study deals with on-line fault detection and diagnosis(FDD) for heat exchangers of a variable speed refrigeration system(VSRS) based on current information. The current residual which is the difference between real detected current from current sensors and estimated current from no fault model was utilized to diagnose faults of the heat exchangers. Comparing to the conventional FDD of constant refrigeration system based on temperature and pressure information, the suggested FDD method shows better robustness to the VSRS which has a feedback control loop. Moreover the suggested method can be expected more precise and faster diagnosis of faults about heat exchangers. Throughout some experiments, the validity of the method was verified.

• Animal Bioscience
• /
• v.37 no.4_spc
• /
• pp.742-754
• /
• 2024

Asia is not only the primary region for global pig production but also the largest consumer of pork worldwide. Although the pig production in Asia has made great progress in the past, it still is confronted with numerous challenges. These challenges include: inadequate land and feed resources, a substantial number of small-scale pig farms, escalating pressure to ensure environmental conservation, control of devastating infectious diseases, as well as coping with high temperatures and high humidity. To solve these problems, important investments of human and financial capital are required to promote large-scale production systems, exploit alternative feed resources, implement precision feeding, and focus on preventive medicine and vaccines as alternatives to antibiotics, improve pig breeding, and increase manure recycling. Implementation of these techniques and management practices will facilitate development of more environmentally-friendly and economically sustainable pig production systems in Asia, ultimately providing consumers with healthy pork products around the world.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.225-230
• /
• 2013

A new heteropolyanion-based ionic ($[Hmim]_5PMo_{10}V_2O_{40}$) was synthesized by the reaction of molybdovanadophosphoric acid ($H_5PMo_{10}O_{40}$) with N-methylimidazole. [$[Hmim]_5PMo_{10}V_2O_{40}$ showed a high catalytic activity in the oxidative desulfurization of sulfur-containing compounds in 1-methylimidazolium tetrafluoroborate ($[Hmim]BF_4$) ionic liquid using 30% aqueous $H_2O_2$ as the oxidant. The catalytic system was of high activity, simplified workup and flexible recyclability. The catalytic oxidation reactivity of sulfur-containing compounds decreased in the order dibenzothiophene (DBT) > 4,6-dimethyldibenzothiophene (4,6-DMDBT) > benzothiophene (BT). The influences of various parameters including reaction time (t) and temperature (T), catalyst dosage, and oxidant to sulfur molar ratio n(O)/n(S) on the desulfurization of model oil were investigated in details. 99.1% of DBT conversion in the model oil was achieved at atmospheric pressure under the optimal conditions: n(O)/n(S) = 4:1, $60^{\circ}C$, 100 min and molar ratio of catalyst to sulfur of 0.062. The ionic liquid can be recycled six times without significant decrease in activity.

• Geomechanics and Engineering
• /
• v.29 no.4
• /
• pp.391-405
• /
• 2022

A newly proposed grouting simulation method, the sequential diffusion solidification method was introduced into the numerical simulation of combined bi-borehole grouting. The traditional, critical and difficult numerical problem for the temporal and spatial variation simulation of the slurry is solved. Thus, numerical simulation of grouting and blocking of flowing water in karst conduits is realized and the mechanism understanding of the combined bi-borehole technology is promoted. The sensitivity analysis of the influence factors of combined bi-borehole grouting was investigated. Through orthogonal experiment, the influences of proximal and distal slurry properties, the initial flow velocity of the conduit and the proximal and distal slurry injection rate on the blocking efficiency are compared. The velocity variation, pressure variation and slurry deposition phenomenon were monitored, and the flow field characteristics and slurry outflow behavior were analyzed. The interaction mechanism between the proximal and distal slurries in the combined bi-borehole grouting is revealed. The results show that, under the orthogonal experiment conditions, the slurry injection rate has the greatest impact on blocking. With a constant slurry injection rate, the blocking efficiency can be increased by more than 30% when using slurry with weak time-dependent viscosity behavior in the distal borehole and slurry with strong time-dependent viscosity behavior in the proximal borehole respectively. According to the results of numerical simulation, the grouting scheme of "intercept the flow from the proximal borehole by quick-setting slurry, and grout cement slurry from the distal borehole" is put forward and successfully applied to the water inflow treatment project of China Resources Cement (Pingnan) Limestone Mine.