• Proceedings of the SAREK Conference
• /
• 2004.06a
• /
• pp.130-130
• /
• 2004

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.299-301
• /
• 1996

Recently, as a result of the progress in power electronics and magnet technology, the applications of inverter fed BLDC Motor have increased for industry and home appliance. Also because of the high efficiency, good acoustic noise characteristic, BLDC Motor applications are growing. However, BLDC Motor requires position sensor, which has many problems such as high cost, more space and difficult to install. Therefore, sensorless control algorithm is being studied. In this paper, sensorless algorithm for interior permanent magnet BLOC motor adaptable for home appliance is proposed. The maximum torque per amp operation with advance angle considering load torque and speed was simulated and verified through the experiment.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1995.05a
• /
• pp.94-95
• /
• 1995

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.308-310
• /
• 1996

Recently, as a result of the progress in power electronics and microelectronics, the inverter technology is quickly developing. Also, by using the fast microprocessor and small-sized switching devices, such as IPM, the Inverter becomes more compact and cheap. This paper proposes an inexpensive and small-sized vector controller for induction motors using 87C196MC and IPM. The proposed inverter contributes further space-saving, and high performance features to motor drives system.

• 한국초전도학회:학술대회논문집
• /
• v.12
• /
• pp.59-59
• /
• 2002

• Journal of the Optical Society of Korea
• /
• v.17 no.2
• /
• pp.200-204
• /
• 2013

We propose a cell structure for the fast switching of liquid crystals by the fringe field. By forming protrusion between patterned electrodes, we can obtain enhancement of response time. The protrusion reduces the effective cell gap, with which a fast response time can be realized. There is little decrease in the transmittance because the protrusion is located between patterned electrodes. We confirmed that the total response time can be decreased by 33% with little loss of the transmittance by optimizing the shape of the protrusion structure.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.31-35
• /
• 2004

The speed competition of optical disk drive has been accelerated with the fast advancement of its storage density and data transmission technology. The continuous increase of the spinning speed of CD meets the unexpected and catastrophic failure of disk during the operation. The effect of its thickness and outer radius of disk were investigated to reduce stresses and J-integral around the crack tip. The effect of its thickness was considered ahead of the crack tip. In the effect of outer radius of disk, linear elastic fracture mechanics was used to obtain the critical crack length, which indicates the onset length for unstable crack growth. This approach is so significant as to detect the growing crack by disk drive before the catastrophic failure, which will provide the standard size of its safety for high-speed disk drive.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.302-304
• /
• 1996

In this paper, a new algorithm for sensorless speed control of switched reluctance motor (SRM) is proposed. It is based on the measurement of initial rate of change of phase current. The initial rate of rise of phase current mainly depends up on the phase inductance at the time instant when the phase is excited. Therefore, the measurement of initial di/dt permits rotor position estimation, which is used to trigger the next phase. In the proposed technique, there is no need to generate additional current pulses when a phase is not excited. Therefore, this scheme does not introduce the unwanted braking torque. Also, only one current measurement is made every time a phase is excited. This reduces the computational load on the micro-controller and enhances the speed range of the sensorless drive. By using this scheme it is possible to implement the sensorless control of SRM using low cost micro-controller.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.28-30
• /
• 1996

In the paper the authors deal with inverter fed induction motors design criteria for having a wide constant power range. In particular, the flux weakening operation is the main feature considered. The design target concerns the possibility of having a wide flux weakening region avoiding or limiting, at the same time, to oversize the motor and the inverter.

• 한국초전도학회:학술대회논문집
• /
• v.12
• /
• pp.18-18
• /
• 2002