• Bulletin of the Korean Chemical Society
• /
• v.33 no.5
• /
• pp.1748-1752
• /
• 2012

We carried out the tip-enhanced Raman scattering (TERS) with a tip that is functionalized with a Aunanoparticle (AuNP, with a diameter of 250 nm). The AuNP tip is fabricated by a direct mechanical pickup of a AuNP from a flat substrate, and the TERS signal from the AuNP tip - organic monolayer - Au thin film (thickness of 10 nm) is recorded. We find that such a AuNP-tip interacting with a thin film routinely yields signal enhancement larger than ${\sim}10^4$, which is sufficient not only for local (with detection area of ~200 $nm^2$) Raman spectroscopy, but also the nanometric imaging of organic monolayers within a reasonable acquisition time (~20 minutes/image).

• Bulletin of the Korean Chemical Society
• /
• v.26 no.11
• /
• pp.1701-1705
• /
• 2005

We have established an efficient method for the synthesis of the arylpiperazine derivatives in which the acylation of 2-aminopyridine, the coupling reaction of the acyl compound with piperazines, and reduction of the arylpiperazines were performed under a microwave irradiation (300 W) to afford the corresponding target compounds in quantitative yields. In all cases, the reaction times were remarkably reduced when compared with those of the conventional method.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.5
• /
• pp.713-714
• /
• 2005

• Bulletin of the Korean Chemical Society
• /
• v.27 no.3
• /
• pp.413-418
• /
• 2006

Sodium hyaluronate (NaHA), water soluble polymer having ultra-high molecular weight, is characterized by using on-line frit inlet asymmetrical flow field-flow fractionation (FI-AFlFFF) and multiangle light scattering (MALS). This study demonstrates the capability of power programming FI-AFlFFF for the separation of NaHA and the applicability of FI-AFlFFF with MALS for the characterization of molecular weight distribution and their structural information. Since sample injection and relaxation in FI-AFlFFF are achieved by using hydrodynamic relaxation, separation of high molecular weight polymers can be achieved smoothly without halting the separation flow. Experiments are carried out with the two different NaHA products (a raw NaHA sample and a thermally degraded NaHA product) and molecular weight distribution and conformations in solution are determined. Influence of sample filtration on the change of molecular weight distribution is also discussed.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.9
• /
• pp.3267-3273
• /
• 2011

Ag(I) carboxylate gelators with mixed-ligands were systemically investigated to understand the mechanism of the organic gel formation. The gelators constructed 3-D networks of nanometer-sized thin fibers which facilitated gel formation in various aromatic organic solvents, even at very low concentrations. The loss of reflection peaks in the X-ray diffraction data indicated the reduction of strong interactions between the long alkyl chains as the Ag(I) carboxylates formed gels by maximizing their interactions with the organic solvents. The gelation temperature ($T_{gel}$) was measured to explore the interaction between the gelator molecules and solvents depending on their composition and concentration. Based on the gelation phenomena, a dissociation/re-association mechanism was proposed.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1682-1684
• /
• 2002

현재 국내에서 많이 연구 개발되고 있는 펼스코로나 방식은 자동차와 같은 소규모 오염 배출 원에 적용하기엔 경제적.기술적 한계를 가지고 있으며, 또한 3원 촉매법과 같은 화학촉매환원법은 사용조건이 엄격하고 일부 오염물질의 저감만이 가능하기 때문에 종합적인 공해물질 저감대책으로서는 한계가 있다. 따라서 자동차와 같은 소규모 오염배출원에 있어서 다양한 배기오염물질의 동시처리가 가능한 경제적이고 종합적인 공해물질 저감방법의 제시는 매우 중요한 당면 과제이다. 이에 따라 본 연구에서는 현재 본 연구팀이 보유한 전기재료 및 방전분석 기술을 바탕으로 최근 국외에서 자동차 배기가스에서 공해물질의 배출억제 방안으로 활발히 연구되고 있는 유전체방벽방전 방식에 대해 체계적 실험 분석 등을 통하여 보다 효율적인 공해물질 제거방법을 도출하고자 한다.

• Journal of the Korean Wood Science and Technology
• /
• v.18 no.4
• /
• pp.79-85
• /
• 1990

Many kinds of acetosolv lignin including ricestraw and spruce lignin were pyrolyzed. and liquefied in the autoclave reactor using 50% tetralin and m-cresol solution respectively as soluble solvent and Co-Mo as catalyst. In order to promote deoxyhydrogenolysis reaction $H_2$ gas was supplied into the reactor. The ratio between lignin and the soluble solvent are lg and 10cc. The reaction conditions are $200^{\circ}-700^{\circ}C$ of reaction temperature, 10-50 atms of reaction pressure and 100-500rpm of the reactor stirrer. By the deoxyhydrogenolysis liquefaction reaction, the main chemical structures of lignin which are aryl-alkyl-${\beta}$-0-4 ether, phenylcoumaran and biphenyl etc. are easily destroyed into liqufied aromatic compounds and aliphatic compunds linked with aromatic compounds. The percent yield of monomeric phenols on the weight bvase of lignin reacted reached to 12-14% by the chemical analytic GC-MS etc.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.11
• /
• pp.3183-3189
• /
• 2010

In order to increase the specific capacitance and energy density of supercapacitors, non-aqueous supercapacitors were prepared using lithium transition-metal oxides and activated carbons as active materials. The electrochemical properties were analyzed in terms of the content of lithium transition-metal oxides. The results of cyclic voltammetry and AC-impedance analyses showed that the pseudocapacitance may stem from the synergistic contributions of capacitive and faradic effects; the former is due to the electric double layer which is prepared in the interface of activated carbon and organic electrolyte, and the latter is due to the intercalation of lithium ($Li^+$) ions. The specific capacitance and energy density of a supercapacitor improved as the lithium transition-metal oxides content increased, showing 60% increase compared to those of supercapacitor using a pure activated carbon positive electrode.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.11
• /
• pp.3788-3792
• /
• 2012

Spherical-shape melanin nanoparticles with good water-dispersibility were successfully synthesized by a simple oxidation polymerization of 3,4-dihydroxy-phenylalanin (DOPA) with $KMnO_4$. Similar features to those known from natural and synthetic melanin polymers were observed from prepared melanin nanoparticles by FT-IR, UV-Vis., and ESR spectroscopic methods. Their binding ability with several heavy metal ions from aqueous solution was quantitatively investigated, and the maximum binding capacities with melanin nanoparticles to lead, copper, and cadmium ions were obtained as 2.45, 2.17 and 1.88 mmol/g, respectively, which are much larger values than those reported from natural and synthetic melanin polymers. The large binding capacity and fast binding rate of melanin nanoparticles to metal ions can make them an excellent candidate for the remediation of contaminated water.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.11
• /
• pp.1648-1652
• /
• 2004

A set of unprecedented syndiospecific dimethyl- and diethylamino-functionalized polystyrenes was prepared by catalytically polymerizing the corresponding monomers using (pentamethylcyclopentadienyl)titanatrane/MMAO catalytic system. Dialkylamino-functionalized styrene monomers were synthesized by Wittig reaction from the corresponding aldehyde in high yield. The resulting polymers are soluble in polar organic solvents such as THF and show good thermal stability. The chemical transformation of the syndiospecific poly(4-diethylaminostyrene) also gave new polar polymers, namely syndiotactic poly(4-diethylaminostyrene hydrochloride), which is unattainable by traditional synthetic methods.