• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1999년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.208-213
• /
• 1999

Space Physics Sensor (SPS) on-board the KOMPSAT-1 consists of the High Energy Particle Detector (HEPD) and the Ionospheric Measurement Sensor (IMS). The HEPD is to characterize the low altitude high energy particle environment and the effects on the microelectronics due to these high energy Particles. It is composed of four sensors: Proton and Electron Spectrometer(PES), Linear Energy Transfer Spectrometer (LET), Total Dose Monitor (TDM), and Single Event Monitor(SEM). 35MeV proton beam from the medical KCCH cyclotron, at Korea Cancer Center Hospital in Seoul, is used to calibrate the PES. Primary proton beam of 35MeV scattered by polypropylene target is converted to various energy Protons according to the elastic collision kinematics. In this calibration, the threshold level of the proton in the PES can be determined and the energy ranges of PES channels are also calibrated.

• 한국염색가공학회지
• /
• 제27권2호
• /
• pp.119-125
• /
• 2015

The effects of e-beam irradiation on water-repellency and washing durability of water-repellent finished chemically-recycled PET(CR-PET) fabrics were investigated. As results, more doses of e-beam irradiation damaged the fabric surface more severely. It was thought because the high densed energy was formed, where the more e-beam was converged. The contact angle measurement showed that as the dose of e-beam irradiation increased, water wettability of the CR-PET fabric increased slightly. It was thought to be due that the surface etching by e-beam irradiation let water droplet permeate into the fabric surface better. The concentration of the water-repellent finishing agent was more important factor than curing temperature as finishing parameter. It was considered because the water-repellent finishing agent used in this study got to cure sufficiently at low temperature. Consequently, e-beam irradiation improved the washing durability of water-repellent finishing on the CR-PET fabrics.

• 복식
• /
• 제53권1호
• /
• pp.1-15
• /
• 2003

This study as one of a series of systematic studies about dancing costumes will compare the costumes of the middle age with their normal style of dress. In brief, this study wants people to know about middle a9e dancing costumes and understand the culture in the middle ages. It was found that people's everyday clothes in the middle age such as Surcot. Surcot-ouvert, Pourpoint, Houppelande were used as dancing costumes. They were, however. changed from the public's clothes which were tight and long. Rather than wearing costume over others. dancers wore costumes which had slits on skirt or sleeves to increase motion. With the Wild Man of the Wood's which only nobles used for their dancing costumes. costumers highlighted the beauty of human body There were various costume materials used in the middle ages like silk. cotton fabrics, linen or brocade. These materials were used for Surcot and Pourpoint as dancing costumes. The naturalness of nature or geometric patterns also was expressed on the costumes. Further about those patterns, because the development of stained glass, vivid colors were used especially red, light green, blue etc. As for the hair styles used, dancers let their hair down and put a jeweled crown over their hair. In summation. dancers wore the same clothes that normal People did, but the costumes were different depending on social status and gender. The costumes of ordinary people's were based upon ordinary clothes that moved and emphasized the dynamic motion. On the other side, the court dancers' costumes were very fancy. symbolizing a measurement of nobles' from wealth and authority. as well as an expression of a sense of beauty, The main features of middle ages follows. : To emphasize vitality, there were long slits on the side of skirt. Hair decorations and jewels are more used than in the ancient age's. To hide a dancer's social status. they could use a mask. Wild Man of the Wood's was used for the body makeup. All these features of the dancing costumes must contribute to the progress of the dance in the middle age's.

• 가정과삶의질연구
• /
• 제4권2호
• /
• pp.103-117
• /
• 1986

The purpose of this study is to provide the basic information for the improvement of housewives consciousness and satisfaction of household work by analyzing the data regarding the housewives consciousness and satisfaction toward household work. The research problems was described as follows; 1) How independent variables influence the housewives consciousness of household work. 2) How independent variables influence the satisfaction of household work. 3) How relate the housewives consciousness and the satisfaction of household work. The research was conducted on 354 housewives in Seoul during the end of January and the beginning of March, 1986. As for the measurement of the instrument, questionnaire with 46 items was made by investigator. The data were analyzed by frequency, percentage, mean and t-test, F-test, Scheffe-test, Pearson-r. The results were summarized as follows; 1) Among the independent variables, the ages of housewives, durations of marriage, psychologica satisfaction were variables to have influence on the housewives consciousness towark household work. 2) Among the independent variable,s the socio-economic status, durations of marriage, psychological satisfaction were variables to have influence on the satisfaction of household work. 3) There were strong positive correlationship between the housewives consciousness and the satisfaction of household work. As a result, it is necessary to minimize the repetition and the overload of house-hold chores through the rationalization of household work and also to divide householdwork properly to family members. We let the housewives feel that her ability can be obtained from the household work. Especially the housewives must have a clear and a high level of consciousness of the household work an expect to receive high value of her household work from the family members. In order to do so, it seems to be important that housewives makes on great effort to have a positive value system and attitudes toward the consciousness and satisfaction of household work. We also must develop those factors through school and home education.

• 수산경영론집
• /
• 제33권2호
• /
• pp.1-29
• /
• 2002

The main objective of this research aims at analyzing efficiency of government financial transfers(GFTs) to the Korean fisheries sector, using the Linear Structural Relations model(i.e., LISERL model) and the field survey data. Most policies of GFTs tend to be implemented to protect industries with weak competitive advantages such as infant and/or primary industries. Specific policy instruments include income transfers, government loans with lower interest rates, taxes and the like. Fishing activities are made at a highly changeable natural environment of the ocean with a great amount of risk and uncertainty. Fishing households make their livelihood under the small-scale fisheries. Such fisheries and fishing households have also a relatively weak market power. Because of these fisheries characteristics most coastal states have adopted a variety of government support programs. However, despite such a huge government support, during the past several decades the world fishing communities have seen a tendency of continuous fishereis resource overexploitation. For this resason there have been hot debates over the government support policies for fisheries through OECD, FAO, WTO, and UNEP. In general, policy evaluations tend to be made on the basis of benefit-cost(B/C) analysis. However, the B/C analysis may produce results quite different from real ones primarily due to many unmeasurable effects. Thus, the authors composed simple questionaires and let fishermen, government officials and academic people answer the questions. The survery was made in several ways such as post-mail and personal/group interviews. In recent years, for analysis of policy performances and effectiveness, the LISREL model has often been used, which consists of structural and measurement eqquations. This model has a good advantage of transforming unobservable variables to observable ones so that it helps construct endogenous cause and effect relationships among relevant variables. The evaluation was done from the two aspects: policy results and policy effectiveness. The policy result evaluation showed that there is a need for improvement for policy problem perception and decision-making process, while the policy effect evaluation suggested that the policy goals were successfully achieved and social justice was improved from the perspective of the entire society as well. However, the research results showed that the GFT policies rendered little contrubtion to narrowing down the gap between GFT beneficiaries and non-beneficiaries incomes.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 춘계종합학술대회
• /
• pp.179-182
• /
• 2005

최근 유전자 조작 식품이나 농산물의 잔류농약, 중금속 문제가 크게 부각 되면서 식품의 안전성 및 질적인 측면들에 대한 소비자들의 인식이 점차 높아지고 있다. 그러나 유럽, 미국, 일본 등의 나라들이 빠르게 생산이력 시스템을 도입하고 있는 것과 달리 국내에서는 이와 관련된 연구가 아직 미비하여 대책이 필요한 실정이다. 이에 본 논문에서는 생산, 수확 후 관리, 포장, 배송, 저장 등 농장에서 식탁으로 전달되는 모든 과정에서 발생될 수 있는 위해요소의 개입을 낮출 수 있도록 생산이력 시스템을 설계하였다. 그리고 소비자가 이 과정을 직접 확인 할 수 있도록 우수농산물관리제도(GAP : Good Agriculture Practices)를 기반으로 국내 농업 구조에 맞게 데이터 구조를 정의하여 시스템을 구현하였다.

• 정보처리학회논문지A
• /
• 제16A권5호
• /
• pp.381-388
• /
• 2009

무선인터넷 기술의 발달과 응용의 확산으로 위치정보를 이용한 위치기반 서비스 형태는 더욱더 다양해 지고 있다. 특히, 언제 어디서나 사람과 사물 같은 객체의 위치를 인식하고 이를 기반으로 유용한 서비스를 제공하는 유비쿼터스 위치기반 서비스(Ubiquitous Location Based Services : u-LBS)가 중요한 서비스로 대두되고 있다. 이와 관련하여 본 논문에서는 차량 충돌 위치와 관련한 서비스 시스템을 제안한다. 제안 된 시스템에서 사용된 GPS Packet에는 위치에 대한 정보와 차량 충돌에 대한 충돌 세기와 시간, 차량에 대한 NodeID 등으로 구성되어 있다. 이러한 데이터들을 이용하여 하나의 패킷이 만들어 지게 되고 차량 간 충돌이 발생할 경우 차량에서 Gateway로 전송된다. Gateway에서 Server로 전송된 패킷은 충돌 여부를 판단하여 위급상황으로 판단되면, 구급센터로 위치정보와 충돌측정여부에 대하여 알려주게 된다. 또한, 이러한 위급상황에 대해서는 외부에 있는 가족 등의 관련된 사람들에게 무선으로 무선단말기(PDA, 휴대폰)를 통해 알려주게 된다. Server에 들어오게 되는 충돌 정보들은 Database에 저장이 되도록 구성하였다. 아울러, 제안한 u-LBS시스템의 유효성을 검증하기 위한 실험을 수행하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.533-538
• /
• 2003

It has been shown that ion implantation produces remarkable improvements in surface-sensitive physical and chemical properties as well as other mechanical properties, in polymers. In this study, ion implantation was performed onto polymer, PC(polycarbonate), in order to investigate surface hydrophilic property through contact angle measurement using distilled water. PC was irradiated with N, Ar, Xe ions at the irradiation energy of $20\;{\sim}\;50keV$ and the dose range of $5{\times}10^{15},\;1{\times}10^{16},\;7{\times}10^{16}\;ions/cm^2$. The contact angle of water has been reduced with increasing fluence and ion mass but increased with increasing implanted energy. The changes of chemical and structural property are discussed in view of infrared spectroscopy and FT-IR, XPS, which shows increasing C-O bonding and C-C bonding. The root mean square of surface roughness examined by means of AFM changed smoothly from 0.387nm to 0.207nm and the change of wettability was discussed with respect to elastic and inelastic collisions obtained as results of TRIM simulation. It was found that wettability of the modified PC surface was affected on change of functional group and nuclear stopping or linear energy transfer(LET, energy deposited per unit track length per ion) that causes chain scission by displacing atom from polymer chains, but was not greatly dependant on surface morphology.

• 대한원격탐사학회지
• /
• 제15권4호
• /
• pp.289-295
• /
• 1999

Space Physics Sensor (SPS) on-board the KOMPSAT-1 consists of the High Energy Particle Detector (HEPD) and the Ionospheric Measurement Sensor (IMS). The HEPD is to characterize the low altitude high energy particle environment and the effects on the microelectronics due to these high energy particles. It is composed of four sensors: Proton and Electron Spectrometer(PES), Linear Energy Transfer Spectrometer (LET), Total Dose Monitor (TDM), and Single Event Monitor (SEM). 35 MeV proton beam from the medical KCCH cyclotron, at Korea Cancer Center Hospital in Seoul, is used to calibrate the PES. Primary proton beam of 35MeV scattered by polypropylene target is converted to various energy protons according to the elastic collision kinematics. In this calibration, the threshold level of the proton in the PES can be determined and the energy ranges of PES channels are also calibrated.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제7권4호
• /
• pp.228-235
• /
• 2007

The main purpose of this paper is to manage the container property effectively at the container yard by applying the RTLS technology to the field of port logistics. Yet, many kinds of noises happen to be inputted with the distance value(between the reader and the tag) which is to be inputted into the location identification algorithm, which makes the distance value jumped due to the system noise of the ultrasonic sensor module and the measurement noise. The Kalman Filter is widely used to prevent this jump occurrence; the noises are eliminated by using the EKF(Extended Kalman Filter) while considering that the distance information of the ultrasonic sensor is non-linear. Also, the 3D RTLS system at the port container yard suggested in this research is designed not to be interrupted for its ultrasonic transmission by positioning the antenna at the front of each sector of the container where the active tags are installed. We positioned the readers, which function as antennas for location identification, to four places randomly in the absolute coordinate and let the positions of the active tags identified by using the distance data delivered from the active tags. For the location identification algorithm used in this paper, the triangulation measurement that is most used in general is applied and newly reorganized to calculate the position of the container. In the first experiment, we dealt with the error resulting in the angle and the distance of the ultrasonic sensor module, which is the most important in the hardware performance; in the second, we evaluated the performance of the location identification algorithm, which is the most important in the software performance, and tested the noise cancellation effects for the EKF. According to the experiment result, the ultrasonic sensor showed an average of 3 to 5cm error up to $45^{\circ}$ in case of $60^{\circ}$ or more, non-reliable linear distances were obtained. In addition, the evaluation of the algorithm performance showed an average of $4^{\circ}{\sim}5^{\circ}$ error due to the error of the linear distance-this error is negligible for most container location identifications. Lastly, the experiment results of noise cancellation and jump preservation by using the EKF showed that noises were removed in the distance information which was entered from the input of the ultrasonic sensor and as a result, only signal was extracted; thus, jumps were able to be removed and the exact distance information between the ultrasonic sensors could be obtained.