• Wind and Structures
• /
• 제38권2호
• /
• pp.129-146
• /
• 2024

Aiming at the problem of non-stationary wind field simulation of downbursts, a non-stationary down-burst generation system was designed by adding a nozzle and program control valve to the inlet of the original wall jet model. The computational fluid dynamics (CFD) method was used to simulate the downburst. Firstly, the two-dimensional (2D) model was used to study the outflow situation, and the database of working conditions was formed. Then the combined superposition of working conditions was carried out to simulate the full-scale measured downburst. The three-dimensional (3D) large eddy simulation (LES) was used for further verification based on this superposition condition. Finally, the wind tunnel test is used to further verify. The results show that after the valve is opened, the wind ve-locity at low altitude increases rapidly, then stays stable, and the wind velocity at each point fluctuates. The velocity of the 2D model matches the wind velocity trend of the measured downburst well. The 3D model matches the measured downburst flow in terms of wind velocity and pulsation characteris-tics. The time-varying mean wind velocity of the wind tunnel test is in better agreement with the meas-ured time-varying mean wind velocity of the downburst. The power spectrum of fluctuating wind ve-locity at different vertical heights for the test condition also agrees well with the von Karman spectrum, and conforms to the "-5/3" law. The vertical profile of the maximum time-varying average wind veloci-ty obtained from the test shows the basic characteristics of the typical wind profile of the downburst. The effectiveness of the downburst generation system is verified.

• 한국수자원학회논문집
• /
• 제56권spc1호
• /
• pp.1059-1069
• /
• 2023

댐붕괴흐름은 댐이 갑자기 붕괴하여 제어가 어려운 상태의 고속흐름이 방출되는 현상이다. 이 연구에서는 3차원의 댐붕괴흐름을 모의하기 위해 OpenFOAM을 사용하여 층류 및 난류 모델을 적용하고 그 결과를 비교하였다. 난류 모의를 위해 레이놀즈 평균 나비에-스토크스 (Reynolds-Averaged Navier-Stokes) 모델, 구체적으로 k-ε 모델을 사용하였다. 수리모형실험과 함께 수정된 다층 블록 장애물 시나리오를 대상으로 두 가지 모델을 평가하였다. 두 모델 모두 댐붕괴흐름을 효과적으로 재현하였으며, 난류 모델은 흐름의 변동성을 감소시키는 역할을 보여줬다. 그러나 난류 모델에서의 과도한 에너지소산은 수위를 과소 평가하게 하는 것으로 나타났다. 수치기법 및 격자 해상도를 개선하여 적용한 결과 흐름재현성이 향상되었는데 이는 특히 구조물 근처의 난류흐름에서 두드러졌다. 모델 안정성의 경우 난류모델의 사용여부보다는 수치기법 및 격자 해상도의 개선에 더 크게 영향을 받았다. k-ε 모델에 내재된 시간평균처리의 특성은 불연속성과 불안정성이 두드러진 댐붕괴흐름을 재현하는 데 한계가 있음을 나타냈다. RANS 모델을 포함한 난류모의는 방대한 계산자원이 필요하지만, 층류 모델과 비교하여 성능 향상이 제한적이었다. 댐붕괴흐름을 정확히 재현하기 위해 LES (Large Eddy Simulation) 및 DNS (Direct Numerical Simulation)과 같은 고급 난류 모델의 사용이 권장되며, 이를 위해서는 미세한 공간 및 시간 스케일의 구성이 필수적이다. 이 연구를 통해 댐붕괴흐름을 모의할 때 기본적으로 사용할 수 있는 주요 접근법과 적용가능성을 측정하였으며, 구조물 근처에서 난류흐름에 대한 정확한 표현의 중요성을 강조할 수 있었다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 추계학술대회 논문집
• /
• pp.204-212
• /
• 2003

As the first step to investigate the nonlinear interactions between turbulence and marine structures inside a viscous NWT, a LES technique was applied to the turbulent channel flow for $Re_{T}=150$, in this paper. The employed models were 4 types, such as the Smagorinsky model, the Dynamic SGS model, the Structure Function model and the Generalized Normal Stress model. The simulated data in time-series for the LESs were averaged in both time and space and performed statistical analysis. And results of the LESs were compared with those of a DNS developed in the present study and two spectral methods by Yoon et al.(2003) & Kim et al.(1987). It seems to be quite difficult to evaluate their performances to the present problem, but is seen that the accuracy of LESs are still related to the number of grids(or fine grid size).

• 한국해양공학회지
• /
• 제29권1호
• /
• pp.9-15
• /
• 2015

We investigated the Reynolds number effects on the flow over a twisted offshore structure in the range of 3×10³≤ Re ≤ 1 × 10⁴. To analyze the effect of the twisted surface treatment, a large eddy simulation (LES) with a dynamic subgrid model was employed. A simulation of the cylindrical structure was also carried out to compare the results with those of the twisted offshore structure. As Re increased, the mean drag and lift coefficient of the twisted offshore structure increased with the same tendency as those of the cylindrical structure. However, the increases in the mean drag and lift coefficient of the twisted offshore structure were much smaller than those of the cylindrical structure. Furthermore, elongated shear layer and suppressed vortex shedding from the twisted offshore structure occurred compared to those of the cylindrical cylinder, resulting in a drag reduction and suppression of the vortex-induced vibration (VIV). In particular, the twisted offshore structure achieved a significant reduction of over 96% in VIV compared with that of the cylindrical structure, regardless of increasing Re. As a result, we concluded that the twisted offshore structure effectively controlled the flow structures with reductions in the drag and VIV compared with the cylindrical structure, irrespective of increasing Re.

• Wind and Structures
• /
• 제26권4호
• /
• pp.215-229
• /
• 2018

The appearance of a rivulet at the upper surface of a stay cable is responsible for rain-wind-induced vibration (RWIV) of cables of cable-stayed bridges. However, the formation mechanism of the upper rivulet and its aerodynamic effects on the stay cable has not been fully understood. Large eddy simulation (LES) method is used to investigate flow around and aerodynamics of a circular cylinder with an upper rivulet at a Reynolds number of 140,000. Results show that the mean lift coefficients of the circular cylinder experience three distinct stages, zero-lift stage, positive-lift stage and negative-lift stage as the rivulet located at various positions. Both pressure-induced and friction-induced aerodynamic forces on the upper rivulet are helpful for its appearance on the upside of the stay cable. The friction-induced aerodynamic forces, which have not been considered in the previous theoretical models, may not be neglected in modeling the RWIV. In positive-lift stage, the shear layer separated from the upper rivulet can reattach on the surface of the cylinder and form separation bubbles, which result in a high non-zero mean lift of the cylinder and potentially induces the occurrence of RWIV. The separation bubbles are intrinsically unsteady flow phenomena. A serial of small eddies first appears in the laminar shear layer separated from the upper rivulet, which then coalesces and reattaches on the side surface of the cylinder and eventually sheds into the wake.

• 한국화재소방학회논문지
• /
• 제26권1호
• /
• pp.31-37
• /
• 2012

본 연구는 주거용 건축물의 열역학적 수치해석모델을 검토하는데 목적이 있다. 화재하중과 화재강도는 성능설계의 사용이 증가함에 따라 건축물 화재안전 설계에 중요한 요소으로 대두되고 있으며, 컴퓨터 성능의 발전으로 수치해석을 통한 예측이 가능해 지고 있다. 주거 가연물의 연소특성을 예측하기 위해 각가연물의 수치해석용 모델을 설계하였다. 해석된 결과를 검증하기 위해 수치해석의 결과를 실물 화재실험의 결과와 비교하였다. 수치해석을 위해 FDS5를 사용하였으며, 난류해석을 위해 LES모델이 적용하였다. 검증결과 화염전파 현상 및 온도곡선은 실험결과와 정성적으로 잘 일치함을 확인하였다.

• 한국생산제조학회지
• /
• 제25권3호
• /
• pp.182-188
• /
• 2016

This study investigates cavity flows through a guide grill above a resonator. Vortex distributions and intake flows are simulated for various shapes of the guide grill. The flows are assumed to be compressible, unsteady, and turbulent. Numerical simulations are conducted using a large eddy simulation (LES) model. To analyze the effect of the guide grill shape, three cavity lengths (0.2H, 0.6H, and 1.0H) and cavity angles ($30^{\circ}$, $45^{\circ}$ and $60^{\circ}$) are considered based on resonator height (H). The results show that the vortex generated in the resonator by cavity flow increases with cavity length. Thus, the intake flow is minimum at the smallest cavity length and angle. However, when cavity length is equal to resonator height, the intake flow decreases. The maximum intake flow occurs at a cavity angle $45^{\circ}$ at higher cavity lengths owing to the interaction between the vortex in the resonator and intake flow.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.1984-1989
• /
• 2008

In this study, fire simulations were performed to analyze the characteristics of the fire driven flow and the effects of the platform screen door on the smoke flow in the station, when the fire occurred in the center of the platform. Soongsil Univ. station (line number 7, 47m in depth underground) was chosen which was the one of the deepest underground subway stations in the Seoul metro, SMRT. The parallel computational method was employed to compute the heat and mass transfer eqn's with 6 CPUs of the linux clustering machine. The fire driven flow was simulated with using FDS code in which LES method was applied. The Heat release rate was 10MW and The Ultrafast model was applied for the growing model of the fire source. The 10,000,000 structured grids were used.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2016년도 학술발표회
• /
• pp.400-400
• /
• 2016

자연하천에서 다양한 목적으로 설치된 수공구조물을 볼 수 있으며 대표적으로 교량의 교각을 들 수 있다. 교각 주위에서 발생하는 국부세굴은 교량붕괴의 가장 큰 원인이므로 이에 대한 연구는 필수적이다. 수리실험 또는 수치모형을 이용하여 교각주변의 국부세굴에 관한 많은 연구들이 수행되었지만 세굴인자의 특성 및 메커니즘에 대한 연구는 여전히 부족하다. 본 연구에서는 LES(large-eddy simulation)에 유사이송 및 하상변동 모형과 결합하여 2개의 원형교각 주변의 흐름 및 세굴을 수치모의 하였다. LES와 유사이송 및 하상변동 모형의 결합은 난류의 영향을 직접 모형에 고려할 수 있기 때문에 교각 주변에서 발생하는 말굽형 와 구조와 같은 복잡한 흐름에 의한 영향이 반영된다. 계산영역은 흐름방향으로 10 m, 횡 방향으로 2.4 m로 하였고, 지름(D) 0.16 m를 가지는 원형교각을 유입부로부터 2.4 m 떨어진 위치에 배치하였다. 이때 두 개 교각사이의 각은 $0^{\circ}{\sim90^{\circ}$이고 원형교각 사이의 거리는 5D로 하였다. 수치모의에 사용된 조건은 이전의 수리실험(Khosronejad et al., 2012)을 참고하여 접근평균유속은 0.25 m/s, 수심은 0.15m를 사용하였다. 수치모의는 원형교각 주변의 최대세굴심이 평형상태에 이를 때 까지 수행하였다. 접근각도 변화에 따른 원형교각 주변의 세굴과정 및 특성을 분석하였으며 최대 세굴심 결과를 Hannah(1978)의 수리실험결과와 비교하였다.

• Wind and Structures
• /
• 제28권6호
• /
• pp.389-404
• /
• 2019

In coastal regions, it is common to witness significant damages on low-rise buildings caused by hurricanes and other extreme wind events. These damages start at high pressure zones or weak building components, and then cascade to other building parts. The state-of-the-art in experimental and numerical aerodynamic load evaluation is to assume buildings with intact envelopes where wind acts only on the external walls and correct for internal pressure through separate aerodynamic studies. This approach fails to explain the effect of openings on (i) the external pressure, (ii) internal partition walls; and (iii) the load sharing between internal and external walls. During extreme events, non-structural components (e.g., windows, doors or rooftiles) could fail allowing the wind flow to enter the building, which can subject the internal walls to lateral loads that potentially can exceed their load capacities. Internal walls are typically designed for lower capacities compared to external walls. In the present work, an anticipated damage development scenario is modelled for a four-story building with a stepped gable roof. LES is used to examine the change in the internal and external wind flows for different level of assumed damages (starting from an intact building up to a case with failure in most windows and doors are observed). This study demonstrates that damages in non-structural components can increase the wind risk on the structural elements due to changes in the loading patterns. It also highlights the load sharing mechanisms in low rise buildings.