• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.7B
• /
• pp.606-612
• /
• 2012

Visible light communications (VLC) uses modern solid-state LEDs to broadcast information. Emerging white-light LEDs allows the combination of lighting and optical wireless communication in one optical source. In this paper, a new LED lighting using one-chip-type white LED is proposed for efficient illumination and optical wireless communications. Performance analysis such as horizontal illuminance, 3-dB cut-off frequency, inter-symbol interference, signal-to-noise ratio and bit-error rate shows the effects of the shapes of LED lighting. Performance of the proposed LED lighting under the existence of obstacles is superior to that of the existing LED lighting in illumination and optical wireless communication.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.4
• /
• pp.740-749
• /
• 2015

In the visible light (VL) communication based on the conventional LED lights, depending on the increase of the communication range, the signal received at the photodiode of the VL receiver has usually the random distorted and decreased amplitude due to the path loss and fading effects of the VL channel. In order to overcome this problem, we propose, design, and implement the visible light communication circuit based on the comparator threshold voltage, where has a built-in distance compensation function. In addition, the performance of the proposed technique is evaluated and analyzed depending on the distance and communication speed through comparing the proposed VLC system based on the threshold voltage with the conventional one.

• Journal of Convergence for Information Technology
• /
• v.7 no.6
• /
• pp.167-172
• /
• 2017

In this paper, we propose a variable RGB interleaving technique for efficient data transmission in LED based visible light communication system. Visible light communication systems that utilize light as a resource for data transmission are affected by the nature of light and the three primary colors of light. However, the nature of light, such as light reflection, diffraction, and superposition, causes interference of the data to be transmitted, causing burst errors in the data. Such a problem causes the BER performance of the visible light communication system to degrade. To solve these problems, this paper attempts to utilize the variable RGB interleaving technique. Through variable RGB interleaving, data burst errors can be reduced and inter channel interference in a visible light communication system can be reduced. In addition, if the proposed system is applied to meet the QoS that depends on the importance of data or the requirements of the user, it can provide QoS requested by the user and enable efficient data transmission.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.11
• /
• pp.1078-1083
• /
• 2013

At the ubiquitous age, applications of Wireless Personal Area Network (WPAN) technology using LEDs are in progress. However, visible light communication using LED have weakness, which deteriorates performance of communication. To reduce information losses, which is caused by optical noise, such as incandescent lamps, fluorescent lamps, sunbeam etc., proposed channel coding scheme, double binary turbo codes. In this paper, encoding scheme of the proposed system is described and simulation results are analyzed. We had expected improved performance by using double binary turbo codes. Finally, performances of the proposed system came up to our expectations.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.65-67
• /
• 2021

This thesis is to proposer a new algorithm for a position measurement system using a trilateration method through visible light communication(VLC), by light emitting diode(LED). The length from each LED to the sensor is derived, and location information is found using trilateration method based on the derived length. Unlike th existing positioning system using visible light communication, the proposed positioning system is simpler and more cost effective because it does not require communication between the transmitter and the receiver.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.1
• /
• pp.166-171
• /
• 2012

In this paper, short-range underwater wireless communication technique using visible LEDs is proposed. As an alternative to conventional acoustic system, visible LED communications show high quality and high speed data transmission characteristics. We design a frequency modulation-based optical wireless audio transmission system. The CD4046B phase-locked loop device is applied to implement the frequency modulation and demodulation. With a transmission modulation of 100 kHz, audio signal has successfully received at a transmission distance of 30 cm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.9
• /
• pp.2174-2182
• /
• 2013

This paper analyzed the PHY technology of IEEE 802.15.7 which is a technology trend and international standard of the LED-based VLC communication system. Also, the study analyzed the complexity of the system as well as the reception performance in a visible light wireless channel environment by analyzing detailed technology of PHY I mode and designing the RS code and block interleaver. According to the result, concerning PHY I which is operated in a single mode, it was confirmed that the complexity in designing the system was higher compared with an environment of the transmission of a short massage. Also it was confirmed that in a multi-path visible light channel environment, the reception SNR=1.5dB was required additionally.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.9
• /
• pp.787-794
• /
• 2012

The visible light communication is considered as a next generation communication technology, when utilizes LED and PD for communication. Since it is easy to provide LOS communication environment along with cheap deployment cost, the positioning system based on VLC has been actively studied. However, the existing positioning system using VLC requires a complex computation and an additional deployment cost due to sensors for example. In this paper, we propose a new positioning system based on VLC which does not require additional complexity and the cost. In addition, the procedure for operating LED panels for positioning and the recognition schemes of pilot signal are proposed. The performance of recognition schemes of pilot signal is analyzed through the computer simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.3
• /
• pp.588-594
• /
• 2015

Although GPS technology for location positioning system has been widely used, it is difficult to be used in intelligent transport systems, due to the large positioning error and limited area for receiving radio signals. Thanks to the rapid development of LED technology, LED lights become popular in many applications. Especially, visible light communications (VLC) has raised a lot of interests because of the simultaneous functioning of LED illumination and communication. Recent studies on positioning system using VLC mainly focused on indoor environments and still difficult to satisfy positioning accuracy and simple implementation simultaneously. In this paper, we propose a positioning system based on VLC using the coordinate information of LEDs installed on the road infrastructure. Extracting the LED signal, obtained through VLC, from the easily accessible camera image, it is possible to estimate the position of the car on the road. Simulation results show that the proposed scheme can achieve a high positioning accuracy of 1 m when large number of pixels is utilized and the distance from the LED light is close.

• Journal of Convergence Society for SMB
• /
• v.6 no.4
• /
• pp.99-106
• /
• 2016

In this paper, we propose an adaptive FEC scheme in visible light communication using white LED. To this end, we investigate the red, green and blue mixing ratio of white LED in order to achieve the white color, and the mixing ratio of those wavelength can be defined as 4 types. Based on those properties, the FEC technique is applied to the wavelength band with the lowest mixing ratio according to mixing ratio types. At that point, we use a LDPC channel coding scheme as the FEC technique. Therefore, the proposed system can mitigate the reduction of data rate and improve total BER performance.