• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12B
• /
• pp.1586-1594
• /
• 2011

LED-ID (light emitting diode - identification) technology is the new paradigm in the identification technology environment. LED-ID system typically needs line of sight (LOS) that supports narrow FOV transceivers links to achieve high data rate. On the other hand, narrow FOV reduces the coverage area. Therefore, the number of tags is increased significantly to cover the whole area. In this case number of link switching is increased when the reader moves within whole coverage area. Link switching delay is the important factor for the moving reader to maintain the communication with high data rate and better QoS. In this paper we propose in literature a new link switching scheme and measure the link switching delay time for LED-ID system. The simulation results show that the proposed link switching scheme is a possible candidate for multi-tag LED-ID system.

• Journal of Satellite, Information and Communications
• /
• v.5 no.2
• /
• pp.69-74
• /
• 2010

In this paper, we present an indoor positioning system based on light emitting diode (LED). Because LED is a semiconductor light emitting device, we can easily switch and modulate electrical signals into lightwave signals at high speed using LEDs. We assigned unique 8-bit ID address to each LED lights. Photo diode receives data from 16-LED lights and takes correlation coefficient beteween received data and each LED-ID. Using correlation coefficient, proposed positioning system shows resolution of 50 cm in dimensions of $4\;m\;{\times}\;4\;m\;{\times}\;2\;m$.

• Journal of Satellite, Information and Communications
• /
• v.12 no.4
• /
• pp.157-161
• /
• 2017

Effective management of ULD (Unit Load Device) in Air Cargo Transportation is one of the Airline's main concerns. At present, the way of management of ULD which has the ID tag based on RFID is carried by cargo control staff with PDA. However, the activity of ULD management is limitted due to complexity of cargo terminal facilities. In this study, we offer the effective way of management of ULD by the DRONE equipped by LED-ID & RFID READER at the higher altitude in Air Cargo Terminal to recover the difficulty of identification due to complexity of terminal facilities. Further to the above, we suggest the operational effectiveness, limitation, and the direction of future research.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.5A
• /
• pp.358-366
• /
• 2012

LED-ID (Light Emitting Diode - Identification) is one of the key technologies for identification, data transmission, and illumination simultaneously. This is the new paradigm in the identification technology environment. There are many issues are still now challenging to achieve high performance in LED-ID system. Collision issue is one of them. Actually this is the most significant issue in all identification system. LED-ID system also suffers from collision problem. In our system, collision occurs when two or more readers transmit data to tag at the same time or vice versa. There are many anti-collision protocols to resolve this problem; such as: Slotted ALOHA, Basic Frame Slotted ALOHA, Query Tree, Tree Splitting, and Q-Algorithm etc. In this paper, we propose modified Q-Algorithm to resolve collision at tag. The proposed protocol is based on Q-Algorithm and used the information of arrived readers to a tag from neighbor. The information includes transmitting slot number of readers and the number of readers that can be arrived in next slot. Our proposed protocol can reduce the numbers of collision slot and the successful time to identify all readers. In this paper our simulation and theoretical results are presented.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.2
• /
• pp.115-121
• /
• 2013

LED-ID (Light Emitting Diode-Identification) network is envisioned to be the next generation indoor wireless communication medium by which simultaneously high speed data transmission, identification, and illumination are possible. In spite of being extremely promising, it suffers from much impairment. Signals having different propagation paths can suffer from delays, and phase shifts which will eventually result interference. The probability of interference is also increased when communication links are established between a tag and several readers. Therefore it is necessary to reduce the interference in LED-ID network to ensure quality of service. It is possible to avoid interference by knowing the information about readers prior to assign the available spectrum. In this paper, we have proposed dynamic spectrum decision using cognitive radio concept. The simulation results justify that the proposed scheme is better than the conventional scheme.

• Journal of Digital Contents Society
• /
• v.15 no.1
• /
• pp.129-136
• /
• 2014

Wi-Fi fingerprinting system is a very popular positioning method used in indoor spaces. The system depends on Wi-Fi Received Signal Strength (RSS) from Access Points (APs). However, the Wi-Fi RSS is changeable by multipath fading effect and interference due to walls, obstacles and people. Therefore, the Wi-Fi fingerprinting system produces low position accuracy. Also, Wi-Fi signals pass through walls. For this reason, the existing system cannot distinguish users' floor. To solve these problems, this paper proposes a LED fingerprinting system for accurate indoor positioning. The proposed system uses a received optical power from LEDs and LED-Identification (LED-ID) instead of the Wi-Fi RSS. In training phase, we record LED fingerprints in database at each place. In serving phase, we adopt a K-Nearest Neighbor (K-NN) algorithm for comparing existing data and new received data of users. We show that our technique performs in terms of CDF by computer simulation results. From simulation results, the proposed system shows that a positioning accuracy is improved by 8.6 % on average.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.11
• /
• pp.1078-1083
• /
• 2013

At the ubiquitous age, applications of Wireless Personal Area Network (WPAN) technology using LEDs are in progress. However, visible light communication using LED have weakness, which deteriorates performance of communication. To reduce information losses, which is caused by optical noise, such as incandescent lamps, fluorescent lamps, sunbeam etc., proposed channel coding scheme, double binary turbo codes. In this paper, encoding scheme of the proposed system is described and simulation results are analyzed. We had expected improved performance by using double binary turbo codes. Finally, performances of the proposed system came up to our expectations.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.5
• /
• pp.623-629
• /
• 2018

Smart Factory is a concept of automatic production system of machines by the fusion of ICT and manufacturing. As a base technology for realizing such a smart factory, there is an increasing interest in a low-power environmentally friendly LED lighting system, and researches on so-called optical ID related application technologies such as communication using a LED and position recognition are actively underway. In this paper, We have proposed a system that can reliably identify logistics location and additional information without being affected by electromagnetic interference such as high voltage, high current, and generator in the plant. Through the basic experiment, we confirmed the applicability of the color ID recognition rate from 98.8% to 93.8% according to the eight color variations in the short distance.

• Electronics and Telecommunications Trends
• /
• v.23 no.5
• /
• pp.32-39
• /
• 2008

반도체 LED가 조명 인프라를 바꾸는 신성장 기술로 급부상하고 있다. LED는 백열전등에 비하여 전기 절감 효과가 높고, 형광등에 비하여 수은을 사용하지 않아 친환경적이다. 통신 및 조명 환경 변화에 부응한 기술로서, LED 조명과 동시에 통신을 할 수 있는 가시광 무선통신 융합 기술이 등장하였다. 본 고에서는 조명과 통신의 전혀 다른 산업이 융합된 기술로 탄생하게 된 기술적 배경, 가시광 무선통신의 국내 및 국제 표준동향, LED 조명통신 융합 기술에 의한 융합 서비스를 설명한다. 가시광 무선통신 기술은 눈으로 확인하는 통신, 빛 색에 따른 선별통신, LOS 통신 보안을 보장해주는 것이 특징이다. 또한, 조명통신 융합에 의해 광 ID, 광센서, 초정밀 실내 측위, M2M 등의 신규 융합 서비스도 제공할 수 있다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2005.04a
• /
• pp.139-142
• /
• 2005

This paper describes an automatic finite element (FE) mesh generation for three-dimensional structures consisting of free-form surfaces. This mesh generation process consists of three subprocesses: (a) definition of geometric model, i.e. analysis model, (b) generation of nodes, and (c) generation of elements. One of commercial sol id modelers is employed for three-dimensional sol id structures. Node is generated if its distance from existing node points is similar to the node spacing function at the point. The node spacing function is well control led by the fuzzy knowledge processing. The Delaunay method is introduced as a basic tool for element generation. Automatic generation of FE meshes for three-dimensional sol id structures holds great benefits for analyses. Practical performances of the present system are demonstrated through several mesh generations for three-dimensional complex geometry.