• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.1
• /
• pp.35-42
• /
• 2010

This paper presents the Two-stage LED Driving system using LLC resonant converter for LED lighting application. Due to the existence of the nonisolation DC/DC converter to control the LED current and the light intensity, the conventional three-stage LED Driving system has the problem of low power conversion efficiency. To solve this problem, a novel scheme without any nonisolation DC/DC converter is proposed, in which, the isolated DC/DC converter, e.g., LLC resonant converter in the paper, can perform the LED current control and stage, e.g., PFC stage and LLC stage, the efficiency can be significantly improved. Moreover, the cost and the volume of the whole LED driving system can be reduced compared to those of the conventional ones. The operational principle and the characteristics of the proposed scheme are presented. The proposed scheme is verified experimentally with a 45W output prototype LED driver.

• Animal Bioscience
• /
• v.36 no.5
• /
• pp.731-739
• /
• 2023

Objective: This study was to evaluate the interaction of three different light-emitting diode (LED) light colors (white, green, and blue) and three intensities (5, 10, and 15 lx) on slaughter performance, meat quality and serum antioxidant capacity of broilers raised in three-layer cages. Methods: A total of 648 (8-days-old) male broiler chicks (Cobb-500) were randomly assigned in 3×3 factorially arranged treatments: three light colors (specifically, white, blue, and green) and three light intensities (namely, 5, 10, and 15 lx) for 35 days. Each treatment consisted of 6 replicates of 12 chicks. The test lasted for 35 days. Results: The semi-eviscerated weight percentage (SEWP) in 5 lx white was higher than that in 15 lx (p<0.01). The eviscerated weight percentage (EWP) (p<0.05) and water-loss percentage (WLP) (p<0.01) decreased in 10 lx white light than those in green light. Under blue light, the content of hypoxanthine (Hx) in muscle was lower than that under white and green light (p<0.01). The content of malondialdehyde (MDA) in 15 lx blue light was higher than that in 10 lx green light (p<0.05). Light color had an extremely significant effect on thigh muscle percentage, WLP, Hx, and crude protein content (p<0.01). Light intensity had a significant effect on SEWP (p<0.05), EWP (p<0.05), lightness (L^*) value (p<0.05), WLP (p<0.01), and the contents of superoxide dismutase (p<0.05), MDA (p<0.01), glutathione peroxidase (p<0.01). Conclusion: Using white LED light with 10 lx light intensity can significantly improve the chicken quality of caged Cobb broilers, improve the content of inosine acid in chicken breast and enhance the antioxidant capacity of the body. We suggest that the broiler farm can use 10 lx white LED light source for lighting in 8 to 42 days.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1297-1299
• /
• 2009

A series of $Eu^{2+}/Mn^{2+}$ co-activated $Ba_{1.98-x}Sr_xZnS_3$ red emission phosphors was synthesized using the polymerizable complex method. The excitation spectra of the materials contain two wide bands centered at 345nm and 445nm, implicating their possible use for white LED lighting applications. In addition, substitution of Sr for Ba by 20% (x=0.4) improved drastically the emission intensity as well as the internal quantum efficiency compared to those for Sr-free $Ba_2ZnS_3:Eu^{2+}/Mn^{2+}$ phosphor.

• Journal of Applied Reliability
• /
• v.12 no.4
• /
• pp.275-285
• /
• 2012

This paper presents a changes of luminescence property for converted white LEDs with the commercially available silicate phosphor. If silicate phosphor's quantity increase step by step. luminescence property will be changing. we analyze luminescence property for these change and carry out the high temperature aging test for 7,000 hours, the high temperature and humidity aging test for 7,000 hours for reliability. LED degradation not only results in reduced light output but also in color changes. so we monitor correlated color temperature (CCT), chromaticity coordinates(x, y) and spectrum intensity. Those results suggest that humidity factor more bad effect in color changes than temperature factor and Lighting quality is related with quantity of phosphor.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.602-604
• /
• 2016

In this paper, we propose that it can control the interior lighting, LED and alarm clocks based on Bluetooth. The proposed 'Bluetooth based LED Alarm Lamp'may be an ON / OFF by using a Bluetooth module, by the light sensor and voltage transformers were designed to adjust the ON / OFF and light intensity. Also 7-segment display the clock, it was used a piezo-buzzer that designed to ring an alarm in time. And to decrease the voltage by using the touch sensor can adjust the light brightness. It was also added the ability to align the alarm. This piece (Bluetooth based LED Alarm Lamp) can provide a comfortable environment inside the room of a resident if the environment is dark when voltage is maintained to be ON automatic system. And designed with emphasis being able to improve the quality of sleep due to weak light.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.10a
• /
• pp.322-323
• /
• 2015

Traditional rotation type large beacon was characterized by frequent failure, long repair time and high cost etc. These problems are caused by traditional light sources(metal halide lamps or tungsten halogen lamps). In order to solve these problems, IALA standards-based(efficiency and reliability) large LED beacon technologies are needed. we developed by applying a LED. The object of the this project, to design a reflective optics and the high power LED lighting engine module. And to develop a rotational speed control system for controlling flash pattern of beacon. As a result, to develop of LED beacon for landfall mark that distance to reach the light 20NM to 27NM.

• Horticultural Science & Technology
• /
• v.34 no.1
• /
• pp.84-93
• /
• 2016

Plant factories with artificial lights require a large amount of electrical energy for lighting; therefore, enhancement of light use efficiency will decrease the cost of plant production. The objective of this study was to enhance the light use efficiency by using filters to diffuse the light from LED sources in plant factory conditions. The two treatments used diffuse glasses with haze factors of 40% and 80%, and a control without the filter. For each treatment, canopy light distribution was evaluated by a 3-D ray tracing method and canopy photosynthesis was measured with a sealed acrylic chamber. Sixteen lettuces for each treatment were cultivated hydroponically in a plant factory for 28 days after transplanting and their growth was compared. Simulation results showed that the light absorption was concentrated on the upper part of the lettuce canopy in treatments and control. The control showed particularly poor canopy light distribution with hotspots of light intensity; thus the light use efficiency decreased compared to the treatments. Total light absorption was the highest in the control; however, the amount of effective light absorption was higher in treatments than the control, and was highest in treatment using filters with a haze factor of 80%. Canopy photosynthesis and plant growth were significantly higher in all the treatments. In conclusion, application of the diffuse glass filters enhanced the canopy light distribution, photosynthesis, and growth of the plants under LED lighting, resulting in enhanced the light use efficiency in plant factory conditions.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.25-27
• /
• 2007

$Eu^{2+}$-doped $Ca_2Si_5N_8$ was grown on Si(100) substrate using metal-organic deposition (MOD) method and post-annealed at $900^{\circ}C$ in various atmosphere. Luminescence properties of these thin films were investigated with variations of $Eu^{2+}$-doped concentrations and annealing atmosphere. Thin film was formed with clean surface and uniform thickness of about 72 nm. From the measurements of luminescence properties of thin films, film must be post-annealed in nitrogen or mixture of nitrogen and hydrogen atmosphere to emit a sufficient light. For $Ca_{1.5}Eu_{0.5}Si_5N_8$ thin film annealed at $900^{\circ}C$ in nitrogen atmosphere, excitation band from 380 to 420 nm was detected with the maximum intensity at 404 nm and two broad emission bands from 530 to 630 nm were observed. These broad excitation and emission bands must be attributed to the nitrogen incorporations into the films. From the results, $Ca_{2-x}Eu_xSi_5N_8$ thin film has probability for next generation thin film lighting applications such as light emitting diode (LED) or electro-luminescence (EL).

• Journal of Bio-Environment Control
• /
• v.25 no.4
• /
• pp.294-301
• /
• 2016

This study was conducted to analyze the seedling quality of korean melon and the growth after transplanting of korean melon nursed under the LED sources. LED sources were RB7 (Red:Blue=14:2), RB3 (Red:Blue=12:4) and Blue(B=16). Photosynthetic photon flux density(PPFD) was 50, 100 and $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. The lighting treatment was started after graft-taken and was applied for 20 days at 4 hours(05:30 and 07:30, 17:30 and 19:30) per day. Plant height and stem diameter of scion were longer and thicker under a high ratio of blue light condition. Dry matter ratio and compactness were highest in RB3 compared to the other LED sources treatments. $CO_2$ exchange rate increased $5.44{\mu}molCO_2{\cdot}m^{-2}{\cdot}s^{-1}$ under RB7 $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ and dropped to negative values under control. PPFD $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ of RB3 resulted in the longest plant height by 132.3cm and flowering ratio also was the highest by 75%.

• Korean Journal of Materials Research
• /
• v.21 no.5
• /
• pp.250-254
• /
• 2011

We have synthesized bluish-green, highly-efficient $BaSi_2O_2N_2:Eu^{2+}$ and $(Ba,Sr)Si_2O_2N_2:Eu^{2+}$ phosphors through a conventional solid state reaction method using metal carbonate, $Si_3N_4$, and $Eu_2O_3$ as raw materials. The X-ray diffraction (XRD) pattern of these phosphors revealed that a $BaSi_2O_2N_2$ single phase was obtained. The excitation and emission spectra showed typical broadband excitation and emission resulting from the 5d to 4f transition of $Eu^{2+}$. These phosphors absorb blue light at around 450 nm and emit bluish-green luminescence, with a peak wavelength at around 495 nm. From the results of an experiment involving Eu concentration quenching, the relative PL intensity was reduced dramatically for Eu = 0.033. A small substitution of Sr in place of Ba increased the relative emission intensity of the phosphor. We prepared several white LEDs through a combination of $BaSi_2O_2N_2:Eu^{2+}$, YAG:$Ce^{3+}$, and silicone resin with a blue InGaN-based LED. In the case of only the YAG:$Ce^{3+}$-converted LED, the color rendering index was 73.4 and the efficiency was 127 lm/W. In contrast, in the YAG:$Ce^{3+}$ and $BaSi_2O_2N_2:Eu^{2+}$-converted LED, two distinct emission bands from InGaN (450 nm) and the two phosphors (475-750 nm) are observed, and combine to give a spectrum that appears white to the naked eye. The range of the color rendering index and the efficiency were 79.7-81.2 and 117-128 lm/W, respectively. The increased values of the color rendering index indicate that the two phosphor-converted LEDs have improved bluish-green emission compared to the YAG:Ce-converted LED. As such, the $BaSi_2O_2N_2:Eu^{2+}$ phosphor is applicable to white high-rendered LEDs for solid state lighting.