• Journal of Sensor Science and Technology
• /
• v.24 no.4
• /
• pp.232-238
• /
• 2015

In this paper, we introduce a passive transponder in which an LED is used for both a light transmitter and a receiver, and a solar cell is used for supplying power to the all devices in the transponder. The LED in the transponder operates as a photodetector in the receiving mode, and acts as a light source in the transmitting mode. The current responsivity of the LED detector was measured to be in the order of $10^{-4}A/W$, and the receiving bandwidth with a load resistance of $10k{\Omega}$ was about 10 to 30 kHz. Using the LED for an optical transceiver in a VLID transponder, the detection range was about 70 cm when the transponder was illuminated by the visible light from a $3{\times}3$ LED array in a reader.

• Korean Journal of Medicinal Crop Science
• /
• v.28 no.3
• /
• pp.200-208
• /
• 2020

Background: Salvia miltiorrhiza Bunge has been used in traditional medicine. The type of light source has an effect on the growth properties and composition of functional compounds in plants. In this study, we analyzed the effects of different artificial light sources on the growth characteristics as well as antioxidant and antimicrobial activities of S. miltiorrhiza. Methods and Results: Seedlings of S. miltiorrhiza were grown under various artificial light sources, including fluorescent light (FL), light emitting diode (LED), and microwave electrodeless light (MEL), for 8 weeks. Growth characteristics were the best in plants treated with MEL. DPPH scavenging activity of the shoot was more pronounced with the FL treatments, while the roots were more active in plants grown under single wavelength lights (i.e., blue and red LEDs). Among the different light source treatments, the blue LED resulted in a higher total phenolic content in the plants. Furthermore, growing plants growth under the red LED enhanced their total flavonoid content. Notably, the antimicrobial properties of plants varied significantly between light source treatments in this study. Except for E. coli, all the tested microorganisms were susceptible to the plant extracts. Conclusions: The type of light source may be an important parameter for the enhancement of plant growth and functional compounds in S. miltiorrhiza.

• Korean Journal of Agricultural Science
• /
• v.44 no.2
• /
• pp.261-271
• /
• 2017

The aim of this study was to investigate the amount of glucosinolates (GSLs) in kale sprouts (Brassica oleracea L. var. acephala) ('TBC') according to different concentrations of sulfur ions in sprout's nutrient solutions (0.0, 0.5, 1.0, and 2.0 mM) and to different light sources [Fluorescent lamp, Red, Blue, and Mix (R+B) LED]. Kale sprouts were cultivated in a growth chamber for 13 days in sulfur solutions. Kale sprouts were treated with fluorescent lamp and LED light sources for 5 days, from eight days after sowing to harvest. Amount of seven types of GSLs (progoitrin, sinigrin, 4-hydroxyglucobrassicin, glucobrassicin, 4-methoxyglucobrassicin, gluconasturtiin, and neoglucobrassicin) were measured in kale sprouts after harvest. The total GSL content was influenced by different sulfur solution concentration, and it was the highest at S 0.5 mM ($172.54{\mu}mol{\cdot}g^{-1}DW$) and the lowest at S 2.0 mM ($163.09{\mu}mol{\cdot}g^{-1}DW$). The GSL content was influenced by different light source, and it was the highest with Red LED ($159.23{\mu}mol{\cdot}g^{-1}DW$) and the lowest with Blue LED ($147.57{\mu}mol{\cdot}g^{-1}DW$). As the sulfur solution concentration increased under all light source, progoitrin and sinigrin contents tended to decrease while glucobrassicin content showed an upward tendency for all of the light sources. The content of glucobrassicin was higher than that of progitrin when treated with sulfur solutions for all LED light sources. Sinigrin, which has excellent anti-cancer effects, showed the highest rate (92.2%) among all the GSLs, under all of the light sources.

• Korean Journal of Optics and Photonics
• /
• v.27 no.2
• /
• pp.73-80
• /
• 2016

In this paper, we report the results of a study on the design and fabrication of a light-guiding plate (LGP) using a hybrid light-emitting diode (LED) and sunlight source that can be applied to a photobioreactor. LGP patterns for the LED source were designed and engraved on an LGP, together with previously reported patterns for a sunlight source. A control system for the hybrid LGP was designed to maintain the output photon flux density (PFD) from the LGP at a constant value. When the target value of the output PFD was set to $70{\mu}E/(m^2{\cdot}s)$, the error range of the output PFD was found to be within ${\pm}2%$.

• Horticultural Science & Technology
• /
• v.31 no.4
• /
• pp.415-422
• /
• 2013

This study was conducted to establish the optimum LED light source and quality for growth of Wasabia japonica seedlings in the LED chamber plant factory system. The light treatments were combined with four colors LED (red, blue, white, far-red), irradiation time ratio of the red and blue LED per minute(1:1, 2:1, 5:1, 10:1), and duty ratio of mixed light (100%, 99%, 97%). The growth response of W. japonica was the greatest in the R + B mixed light treatment, and seedlings grown in the red LED alone was higher than blue LED alone in the monochromic radiation treatments. In the R + B mixed LED, 1:1 ratio of R and B was the best for total biomass and tiller production. In mixed light treatments, the growth response of W. japonica was highest in the 100% duty ratio with R + B mixed light, while that was highest in the 97% duty ratio with R + B + W mixed light. Leaf area and dry weight were increased in the red light treatment alone, while specific leaf area was increased in the blue light alone. With the increasing red LED light ratio, leaf area and dry weight of W. japonica was significantly increased under the R + B mixed light treatment. In mixed light treatments, the leaf growth responses of W. japonica was highest in the 97% duty ratio with R+B mixed light, while that was highest in the 100% duty ratio with R + B + W mixed light. For cultivating W. japonica in a plant factory, treating red LED supplemented with a blue light or higher ratio of the red to blue LED was benefit to promote the growth of W. japonica.

• Korean Journal of Optics and Photonics
• /
• v.19 no.2
• /
• pp.116-121
• /
• 2008

A two dimensional point light source array can replace both the viewing zone forming optics and the back light panel in the contact-type 3 dimensional imaging systems based on LC panels. This replacement can make the system structure of the 3 dimensional imaging systems no different from that of the conventional LCD and can reduce undesirable visual effects caused by the viewing zone forming optics. The problem with the point light source array is the visual quality deterioration of the system due to the non-ideal nature of the array.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.157-159
• /
• 2006

The advantages of LED(Light Emitting Diode) are low electric power consumption, long life time and excellent visibility. And a LED light source does not include the mercury(Hg) and or a filament, it is expected as an environmentally friendly next generation light source with its good reliability. In order to design and develope the flash lantern using LED for aironautical ground lights, technical trends and new standards about the aironautical ground lights were inspected, and power consumption and flash time for effective luminous intensity of aironautical ground lights were analyzed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.4
• /
• pp.954-964
• /
• 2015

In this research, an overlapped illumination model was newly proposed for designing a freeform LED lens with a uniform illuminance distribution on its illuminating plane. Based on the proposed model and conventional illumination models, freeform lenses were designed and their performances and tolerances were compared. As a result of the tolerance analysis about thickness change in lens, position, size change, central direction change of light emission and characteristic change in LED source. This proposed model and divergent illumination model are similar to the performance about central direction change of light emission in LED source. but the uniformity illumination value in this proposed model is more remarkably value than it in divergent illumination model about characteristic change in LED source.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.10
• /
• pp.14-22
• /
• 2011

The artificial lights to be introduced for the plant factories is requiring the artificial light resources with minimizing the energy consumption to reduce the greenhouse gases which is a major cause of global warming, and maximizing the efficiency in photosynthesis effect light-wave range, in which the plants can be greatly grown and developed, and having the signal light-wave range for forming the light types. the best growing and developing environment for the plants has recently realized with utilizing the LED(Lighting Emitting Diode) lamps, as a environment-friendly green lamps, which can elevating the light efficiency with using only the specific light wave range. In this study, to provide the necessary lights for the full artificial light type of the plant factory, the following research/study and experiments has been conducting. experiments of the spectrum for each light sources, and LED, The intensity of illumination, Irradiance, Photosynthesis Photon Flux Density.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.3
• /
• pp.361-367
• /
• 2011

In this paper, it was attempted to analyze the optimal design of light emitting diode (LED), a source of back light unit (BLU). LED is beginning with commercialized red LED which is made by GaAsP compound semiconductor, and has been developed focusing on liquid crystal panel. In order to get the optimal design, optical simulation was made by analyzing luminosity shape, reflector angle, chip depth, and chip position of LED lighting. Final results show that the proposed LED characteristics were useful to increase light efficiency and it has been proven by distribution chart for actual exposed light on the light guide panel (LGP).