• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.6
• /
• pp.1219-1226
• /
• 2017

In this paper, it is performed the optimal design of the UV LED bar which can be used variously. The UV LED Bar emits ultraviolet rays, so it is important to emit ultraviolet rays constantly for the purpose of use. In order to emit a certain amount of ultraviolet rays as ever, the ultraviolet ray emission should be driven by a constant current source within the operable input voltage range. And also the heat dissipation is particularly important because of the long ultraviolet emission retention time due to the UV utilization characteristics. In addition, since human body protection is essential, the algorithm is configured to operate according to human body detection using distance sensor and Bluetooth. Three 365nm UV LEDs were used in series to emit ultraviolet UVA, operating at the constant current of 500mA with an efficiency of 87.5% and a power consumption of 6.006W. The ultraviolet radiation dose was measured at $5.35mW/cm^2$ at the distance of 10 cm when measured by the Lutron ultraviolet measuring instruments.

• Journal of Korea Multimedia Society
• /
• v.23 no.11
• /
• pp.1383-1387
• /
• 2020

Recently, a 4-col 7-row LED Screen that provides various information of major roads and local governments has been installed and operated. However, due to deterioration due to changes in temperature and humidity, deterioration due to static electricity, and mechanical stress, partial module failure of the display may occur, which is a major cause of missing information of vitally given to citizens. However, there have been frequent cases where the 4-col and 7-row LED Screen that have failed due to reasons such as installed location where the signboards are installed on the road and outdoor, the lack of monitoring means at all times, and the lack of manpower is often neglected for a long time. Following this flow, this paper proposes a method to detect defective modules by analyzing the images collected through the camera fixed to the front part of the LED display.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.12
• /
• pp.1081-1088
• /
• 2013

Hyperspectral cameras acquire reflectance values at many different wavelength bands. Dimensions tend to increase because spectral information is stored in each pixel. Several attempts have been made to reduce dimensional problems such as the feature selection using Adaboost and dimension reduction using the Simulated Annealing technique. We propose a novel material detection method that consists of four steps: feature band selection, feature extraction, SVM (Support Vector Machine) learning, and target and specific region detection. It is a combination of the band ratio method and Simulated Annealing algorithm based on detection rate. The experimental results validate the effectiveness of the proposed feature selection and band ratio method.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.4
• /
• pp.404-409
• /
• 2004

We fabricated photo-sensor for fluorescence detection in LOC. LOC is high throughput screening system. Our LOC screens biochemical reaction of protein using the immunoassay, and converts biochemical reaction into electrical signal using LIF(Laser Induced Fluorescence) detection method. Protein is labeled with rhodamine intercalating dye and finger PIN photodiode is used as photo-sensor We measured fluorescence emission of rhodamine dye and analyzed tendency of fluorescence detection, according to photo-sensor size, light intensity, and rhodamine concentration. Detection current was almost linearly proportional to two parameters, intensity and concentration, and was inversely proportional to photo-sensor size. Integrated LOC consists of optical-filter deposited photo-sensor and PDMS microchannel detected 50 (pg/${mu}ell$) rhodamine. For integrated LOC including light source, we used green LED as the light source and measured emitted fluorescence.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.3
• /
• pp.457-463
• /
• 2011

As computer related technologies are developed, interests in augmented reality technologies are greatly increasing. Augmented reality is a technology that composes digital contents from the real input images through camera and it enables interaction with users. This study designed a directional marker using LED light that emits infrared ray, then, provided a detection algorithm and a marker information extraction method that can realize various virtual objects as augmented reality from one marker. The newly designed method provides a solution to settle the problems in existing marker technologies such as decrease of immersiveness and read rate and single information expression, and at the same time it can minimize the cost or time consumption in marker information storage.

• Journal of Korea Game Society
• /
• v.17 no.3
• /
• pp.45-52
• /
• 2017

This paper proposes a new strategy of emotion-based music visualization. Emotional LED lighting control system is suggested to help audiences enhance the musical experience. In the system, emotion in music is recognized by a proposed algorithm using a dimensional approach. The algorithm used a method of music emotion variation detection to overcome some weaknesses of Thayer's model in detecting emotion in a one-second music segment. In addition, IRI color model is combined with Thayer's model to determine LED light colors corresponding to 36 different music emotions. They are represented on LED lighting control system through colors and animations. The accuracy of music emotion visualization achieved to over 60%.

• Journal of Sensor Science and Technology
• /
• v.20 no.6
• /
• pp.412-419
• /
• 2011

In this paper, we used the inter-bit noise detection method in order to reduce the effects of noise light in a visible light identification system that uses a visible LED as a carrier source. A visible light identification system consists of a reader and a transponder. When the enable signal from the reader is detected, the transponder encodes the response data in RZ(Return-to-Zero) bit stream and sends response signal by modulating a visible LED. The reader detects the response signal mixed with noise light, samples the noise voltage in each blank low time between data bits of the RZ signal, and recovers the original data by subtracting the sampled noise from the received signal. In experiments, we improved the signal-to-noise ratio by 20dB using the inter-bit noise detection method.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.5
• /
• pp.919-926
• /
• 2023

In this paper, we implemented the surveillance camera system capable of day and night shooting. To this end, it is designed to capture clear images even at night using a CMOS image sensor as well as an IR-LED. In addition, a relatively simple motion detection algorithm was proposed through color model separation. Motions can be detected by extracting only the H channel from the color model, dividing the image into blocks, and then applying the block matching method using the average color value between consecutive frames. When motions are detected during filming, an alarm sounds automatically and a day and night motion detection system is implemented that can capture and save the event screen to a PC.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.10B
• /
• pp.1246-1251
• /
• 2011

In this paper, BPSK-OFDM-based LED communication systems are applied to watermarking techniques, were studied on how to transfer the additional information data with at the same time as the transfer of LED communication data. For watermarking kasami code was used as spreading codes, and spread additional data is controlled by small signal level to be BPSK-OFDM does not affect the optical signal. BPSK-OFDM is added to an optical signal is transmitted. The performance of the spreading code as a kasami code is autocorrelation of the noise-free environment, under the noise environment was confirmed by autocorrelation. BPSK-OFDM-based LED communication system has been applied proposed technique throughout the simulation in analyzed to BER of BPSK-OFDM DER performance and watermark signal level according to signal size level of data. That was availability confirmed for watermarking data transmit techniques data as being analysis detection performance of watermarking information using LED communication according to the code.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.5
• /
• pp.143-150
• /
• 2018

With the rapid development of RF based high speed wireless communication technology, devices that can be applied to IoT networks based on RF bandwidth are rapidly spreading, nevertheless, the development speed of the RF communication is not possible to keep up with the spread of the RF band for wireless communication. In this situation, OWC technology that uses visible light source as a transmitter is attracting attention as a technology that can overcome the band exhaustion problem of RF based wireless communication technology. Although, due to the distortion of the LED illumination shape by camera exposure time and LED blinking period, the LED illumination detection rate is degraded and the RoI setting is inaccurate. In this paper, we propose an adaptive median filter applied LED illumination detection algorithm for low rate CamCom, it is possible to detect a clear RoI and LED illumination. This research will be able to play a role as a complementary material of RF based wireless communication technology efficiently.