• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.6
• /
• pp.52-67
• /
• 2001

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.417-420
• /
• 2000

태양전지는 빛에너지를 전기에너지로 변환시켜주는 에너지변환 소자이다. 본 논문에서는 이 태양전지를 수신기의 전원 겸 안테나로써 사용하고자 한다. 태양전지를 수신기의 안테나로 사용하기 위해서는 태양전지가 받아 들이는 빛에너지에 음성신호를 인가해주어야 한다. 실험에서는 일정하지 않은 음성신호대신 Function Generator를 이용하여 신호를 넣어주고 이 신호를 LM741과 KA2904 내의 OP-amp를 통하여 증폭시킨 후 발광 다이오드(LED)에 인가시켜 주었다. LED의 광신호를 Solar-Cell이 받아들여, 직류전압은 전원으로 사용되고 교류신호는 음성신호로 사용된다. 본 실험은 빛을 이용한 무선 송·수신기의 기초적인 단계에 불과하나 고도의 기술이 필요하지 않으므로 그 파생효과와 발전 방향은 무궁무진하다고 할 수 있다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.9B
• /
• pp.1108-1116
• /
• 2011

The visible light communication system that transmits data by controlling light emission of LED and receives data through photo detecter is considered as one of the strong candidates of the next generation wireless communication systems. The visible light communication provides both lighting and wireless communication wherever the LED lamps are installed. Due to the feature of visible light communication system, the communication is possible within the area that LED light reaches, and the communication quality depends on the light intensity received at the receiver. In this paper, we analyze the effects of LED panel position and lighting angel on communication channel quality in visible light communication systems. Through computer simulations, we prove that position of LED panel and light angle have a great impact on illuminance and SNR of the visible light communication systems.

• Electronics and Telecommunications Trends
• /
• v.25 no.2
• /
• pp.142-151
• /
• 2010

LED는 화합물 반도체 특성을 이용해, 전기신호를 적외선 또는 빛으로 주고 받는 반도체의 일종으로 가정용 가전제품, 리모콘, 전광판, 표시기, 각종 자동화기기 등에 사용된다. LED는 최근 컴퓨터, 냉장고, 가로등, 주택용 일반 조명에 이르기까지 반도체산업을 뛰어넘을 차세대 산업군으로 주목받고 있다. LED 조명산업은 저탄소 녹색성장의 핵심축이고, 무(無)수은 친환경 아이템으로 포스트 교토의 기후협약, 저탄소사회 구현을 앞당기는 미래산업이다. 본 고에서는 LED 조명의 가치사슬 및 국내외 산업 구조를 분석하고 결론에서 시사점을 도출하고자 한다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.1
• /
• pp.245-251
• /
• 2015

In this paper, we present a design of PWM-controlled driving device for backlights in LED systems. The system can control either the brightness of the entire screen of backlights of LCD driven by LED or illumination or contrast of each partial segment of the entire screen. The PWM-controlled driving device includes the shift register that shifts the series data according to the clock signal prior to the generation of parallel data. It is also is comprised of a number of registers, a number of counters, a number of comparators, and a number of synchronizing gates (producing the PWM-controlled signals). The proposed device for backlights in LED systems can generate the PWM-controlled signal with a high degree of resolution without the increase of clock frequency. It also contains the PWM-controlled circuit that disperses and restrains the quantized noise.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.797-798
• /
• 2012

The purpose of this study to embody LED visible light communication visual signal delivery system based on TFT-LCD module and to analyze a performance for digital signals. LED lighting enables to transmit data through light, to embody visible light communication, and to control lights in different wavelengths according to LED materials and structural materials. In this study, we aim to create a transmitting and receiving sensor that has implemented LED and visual sensors to LED efficiency and existing TFT-LCD module so as to estimate and indicate a communication distance and to find out application methods and problems. Also, by implementing TFT-LCD technology and next-generation LED visual communication technology, this study aims to check the possibility of technological realization by applying them to various means of communication including ubiquitous communication.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.1
• /
• pp.63-67
• /
• 2015

White light-emitting diode (WLED) is growing interest in using both illumination and communications. This paper reports visible light communication (VLC) composed of a super bright white light-emitting diode, low cost commercial photo-diode and a Fresnel lens. LED driver is consisted of the power MOSFET and MOSFET driver that switches the LED on and off. The modulation bandwidth of the LED used was determined to be 8 MHz. However, it was possible to communicate up to 1 Mbps under illumination of 500 lx because of the weak signal power and a low spectral sensitivity of the SHF213 as a PIN photodiode. In order to enhance the system bandwidth, the LED light was focused on the PIN photodiode by use of the Fresnel lens. As a result of that, visible light link was operated up to modulation bandwidth of the LED. The signal to noise ratio can be improved by 40 dB using an optical concentration at the receiver.

• Science of Emotion and Sensibility
• /
• v.23 no.4
• /
• pp.105-116
• /
• 2020

The purpose of this study is to progress the limitations and disadvantages of existing safety clothing by applying high technology to current safety clothing that is produced and distributed only with fluorescent fabrics and retroreflective materials. Therefore, the industrial suspender-type safety belt and engineering technology are introduced, designed, and fabricated to help save a life in an emergency. First, the suspender-type safety belt to be developed is designed to emit light by LED attached to the film, and the body of the belt-wearer is recognized from a distance through retroreflection from the flashing LED. It aims to support people's safety by preventing accidents during roadside work, rescue activities, and sports activities at night. Second, with the development of advanced devices when the user is in an unconscious state due to distress or falls into an unconscious state due to distress or accident, the tilt sensor of the control unit attached to the belt automatically detects the angle of the human body and generates light and sound. It is intended to further enhance the utilization by mounting a sensing and signaling device that generates a distress signal and shaping it in the form of a belt attached to a vest that can be easily detached from the outside of the garment. When the wearer falls due to an accident, the tilt sensor of this belt detects the angle change and then the controller generates a high-frequency sound and repeated LED blinking signals at the same time. In the case of conventional safety vests, it is almost impossible to detect that the person is wearing a vest when there is no ambient light, but in case of the safety belts in this study, the sound and light signals of the safety belt enable us to find the wearer within 100 meters even when there is no ambient light.

• Proceedings of the Optical Society of Korea Conference
• /
• 2004.07a
• /
• pp.294-295
• /
• 2004

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.2
• /
• pp.433-438
• /
• 2012

With technologies available now, there are only a few virtual objects that augmented reality content can create. So, wider application of it is limited. If people want to realize any augmented reality content, out of a vast amount of materials available as well as virtual objects, the number of virtual objects that markers can render should be made to go up along with the content. In a precedent study, IR LEDs markers render marker information following On-Off signals. The number of LEDs should be raised to render as much information as possible, subsequently leading to the problem of oversized markers. This problem can be solved by generating data signals through the blinking of LEDs. This research puts forward OOK Code algorithm that represents the mode of data transmission using the light of LEDs. The amount of information that can be rendered by a marker increases and the size of the marker gets smaller, which is a merit, when it receives data signals from light.