• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.3
• /
• pp.1-6
• /
• 2004

Recently the examples of a designing a building-lighting to which LED, a solid state Lighting, is applied are increasing in number, but the development of lighting apparatus and the techniques applied to a designing lighting apparatus frequently don't fit to a new source of light. This essay refers to the matters relevant to the techniques for designing a lighting, which are controlled with a digital technology, and the effectiveness of a "Interactive-lighting technique" which has a ductility by a sensor with developing a digital source of light module and applying it to a real designing a building-lighting . In the negative aspect that a digital technology can standardize a space for a lighting, a "Interactive-lighting Technique", which detects an analogic change of nature through a sensor and produces it, can become a new alternative one.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.6
• /
• pp.506-511
• /
• 2017

LED lighting, which many companies are pursuing commercialization, is a representative green energy technology. However, the LED lighting for broadcasting image should have high output and easy portability compared with general LED lighting devices for street lamps, advertisement or transportation devices. Therefore, while shooting a broadcast image if you use LEDs as a substitute light source for halogen lamps and fluorescent lamps that are large in size and uncomfortable to handle it is expected that the lightening of the equipment will activate the broadcasting image lighting equipment industry. After considering the mass production of the LED module board and the SMT production size of the chip mounter, the board size was determined considering the overall size of the product by model. In this paper, four 20W LED boards are arranged vertically in order to produce an 80W board. In other words, by sharing LED module board size by model, high power LED lighting equipments of 120W and 200W can be selected as an increase in the number of boards.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.11a
• /
• pp.95-100
• /
• 2007

Channel letter용 High Power LED Module 개발하기 위하여, 1W 백색(단색) LED 1EA LED Module과 1W 백색(단색) LED 3EA LED Module, 3W RGB LED 1EA LED Module에 대한 3종의 제품 개발하고, 고효율 RGB LED SMPS 회로 설계, 광색 가변을 위한 RGB LED 최적 배치 및 렌즈 설계, 고출력 1W LED Module 방열 설계 및 기구 개발, SMPS 회로 및 RGB LED 배열 회로 통합 시제품 직접 제작하였다, 신뢰성 평가 및 성능 시험 등을 실시하였으며, T자형 Channel letter에 기존 고휘도 LED Module과 개발된 고출력 LED Nodule을 동시에 적용한 결과, 기존 고휘도 LED Module를 사용하였을 경우에는 $1W{\times}10$개로 10W의 전력을 소비하였으나 개발된 고출력 LED Nodule은 $3W{\times}3$개로 9W의 전력을 소비하였으며 1W의 에너지가 절감되었음에도 불구하고 평균 휘도는 약 2.5배, 균제도는 1.43 배가 더 우수한 결과를 얻었다.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.166-167
• /
• 2017

높은 효율과 긴 수명 등으로 형광등을 대체하며 차세대 조명기구로 각광받고 있는 LED 는 필수불가결적으로 PFC 및 DC-DC 컨버터 등으로 구성된 구동회로가 필요하다. 일반적으로 이러한 LED 구동회로의 조건으로 전체 90 % 이상의 고효율이 요구되고 있으나 Two-Stage 로 구성된 구동회로의 하드 스위칭에 따른 손실 및 기타 요건들에 의한 전력소모로 인해 실질적으로 완벽하게 조건을 달성하기 까다롭다. 최근에는 이러한 구동조건을 달성하기 위해 브릿지리스 PFC 컨버터를 적용한 Two-Stage 를 사용하거나 순환 전류 및 스위칭 손실이 보다 적은 LLC 공진 컨버터를 LED 용 구동회로에 접목하는 추세이다. 이에 따라서 본 논문은 LED 조명용 Single-stage LLC 공진 컨버터를 구성하여 동작특성을 분석하였다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.15-18
• /
• 2009

Photopia, LightTools, and ASAP are typical software for optical design of a luminaire. Through using various lighting simulation software some different results can be found under the same conditions. Therefore, the purpose of this paper is to compare simulated photometric data and values illuminance of different types of LED prism luminaires under the same conditions. Then, LED prism luminaires were divided into the linear type and the planar type. Also three kinds of prism angles were divided into $30^{\circ}$, $45^{\circ}$, and $60^{\circ}$. In addition, the reasons for such differences were analyzed.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.2241_2242
• /
• 2009

본 논문은 강의실 조명설계로 2/40W FL${\times}$9와 2/25W LED FL${\times}$12를 Relux 2007를 이용하여 모델링을 통한 시뮬레이션을 측정 하였으며, 두 램프를 비교 분석하여 가장 이상적인 조명기구 및 조도 값을 알아본다. 이 시뮬레이션 결과 2/40W FL${\times}$9의 경우가 2/25W LED FL${\times}$12를 사용했을 때 보다 조도와 균제도가 높게 측정되었고, 소비전력은 2/25W LED FL${\times}$12 매입했을 때가 낮게 나왔다. 금후 LED 형광등 조명설계에 있어서 도움을 줄 수 있을 것으로 기대된다.

• KIEAE Journal
• /
• v.15 no.2
• /
• pp.117-122
• /
• 2015

Purpose: Generally, 30% of the total energy consumption in office building is used for artificial indoor lightings, and almost 75-85% of electric power in fluorescent and Light-Emitting Diode (LED) lightings can be dissipated as a form of heat into indoor environment. The heat generated by indoor lightings can cause the increase of cooling load in office buildings. Thus, it its important to consider indoor lightings as a heat and light source, simultaneously. Method: In this study, we installed two kinds of indoor lightings including fluorescent and LED lightings and measured surface temperature of both indoor lightings. In addition, we obtained ambient temperature of indoor space and finally calculated total heat dissipated from plenum area and surface of lightings. Result: Total indoor heat gain was 87.17Wh and 201.36Wh in cases of six 40W-LED lightings and 64W-fluorescent lightings, respectively.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.161-164
• /
• 2008

ELS(Edge Light System)을 이용한 40W조명 시스템을 개발하기 위하여, ELS에 적합한 LED를 선정하고, 색온도 제어라 광색제어를 위한 구동회로 및 제어회를 설계 제각 하였으며, 0.5W R,G,B 4 IN 1 Package 를 적용하여 LED 180EA를 사용하여 LED Lighting System을 개발하였다. ELS LED Lighting System은 40W급 LED SMPS 구동회로 및 광색/색온도 제어회로 설계, 면발광을 위한 ELS 설계, 방열 설계 및 기구 구조 설계를 통하여 개발되었으며, 직접 시제품을 제작하고 그 성능을 측정하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.4
• /
• pp.733-737
• /
• 2007

The object of this paper is to propose a method to solve resulting heat in using numerous modulized watt-class LEDs in MCPCB as lighting device. To use LED for lighting, the chip needs to have a large capacity, resulting in extra heat in P-N connection area. To solve this problem, a Pottier Module, heat-sink panel and a fan was installed to measure variations in the temperature. Additionally, temperature variation characteristics were observed according to the heat conductor panel connecting cooling module and heat-sink panel, insulator and thermal grease. As a result, the type and amount of heat-sink panel was the most important facto. The fan would effect the temperature by max. $18[^{\circ}C]$ while other materials affected the temperature by $2{\sim}3[^{\circ}C]$, showing significant difference.

• Journal of the Korean Solar Energy Society
• /
• v.23 no.1
• /
• pp.68-75
• /
• 2003

본 논문에서는 파랑, 녹색, 호박색 빨강색, 백색 등 고휘도 5mm LED(light emitting diode)의 기본적인 분광분포(SED: spectral energy distribution) 특성을 분석하였으며, LED램프의 중요한 광학 특성인 광속, 효율 피크 파장$({\lambda}p)$, 가중치 평균 파장, 반치폭(FWHM, $\Delta\lambda$), 색도좌표, 주 파장, 자극순도(Pe)와 휘도순도(Pc) 등을 측정 및 실험하였다. 제시된 LED램프의 특성 데이터는 앞으로 LED램프를 사용한 새로운 조명등기구를 개발하는데 많은 도움을 줄 것이며, 이러한 측정 데이터들은 조명용 광원으로서 LED램프의 사용 대체 가능성을 나타낸다.