• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.5
• /
• pp.221-227
• /
• 2008

This paper is to show the designing for LED lights driver unit. The main purpose of driver designing is high electrical efficient performance and intelligent control LED driver. Nowadays, a lightning system with some of charactestics such as an environmentally friendly purposes with a possible reduction of electric power consumptions. We constitute a intelligent contron LED control system that helps to save an electric energy, and a communication system to control the system. This LED driver can be used for intelligent light control. This product expects to improve the light control by dimming instead of interlace on/off light control that increases the social cost such as car accidents and etc.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.3
• /
• pp.109-113
• /
• 2016

In this paper, we propose efficient LED lighting control algorithm using a David star magic square. Such algorithms increases the power reduction, the heat efficiency and LED life cycle and the efficiency of the LED lighting control consumption. Lighting system using existing Magic square algorithm could be reduced to increase the heat efficiency of the LED because the LED lighting time of the reduced cross-lighting. but it has a limit to the lighting control. If should apply the this proposed algorithm, can reduces power consumption and increases LED life-cycle, heat efficiency of LED lighting module and efficiency of the lighting control of the LED. This paper proposed that algorithm is by using a David star magic square on the LED Matrix. Divided into twelve areas to move the pattern in constant time interval, to perform the cross rotation and inversion techniques to thereby light up. In this paper proposed algorithm of this paper was compared with existing Magic square approach. As a result, power consumption and heat-value and luminous flux was reduced as the conventional lighting system. And, the LED lighting control increase the efficiency.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.307-308
• /
• 2013

기존 LED(Light Emitting Diode) 백라이트 LCD(Liquid Crystal Display) TV 용 전원 장치는 다중출력 플라이백 컨버터를 사용하여 로직 보드, 영상 보드, LED 백라이트 등의 구동에 필요한 다양한 전원들을 생성, 공급한다. 특히, 기존에는 LED 백라이트의 구동을 위한 출력단에는 부스트 컨버터를 추가하여 LED 전류를 제어하였다. 따라서, 부스트 컨버터에 의한 부피 및 원가가 증가하는 단점이 있었다. 본 논문에서는 부스트 컨버터 없이 보조 스위치 하나만을 사용한 LED 구동회로를 이용하여 LED의 정전류 제어가 가능한 저 가격형 LED 구동회로의 비동기식 제어방법을 제안한다. 최종적으로 제안 회로를 32인치 LCD TV 용 LED 백라이트에 적용하여 그 실험 결과를 바탕으로 제안 회로의 타당성을 검증하였다.

• Journal of Satellite, Information and Communications
• /
• v.8 no.2
• /
• pp.17-21
• /
• 2013

A building energy-saving have been increased worldwide interest. There is continuing research on IT technology for efficient management of BEMS. Recently, It is able to control of LED and to maximize energy savings to the development of LED lighting technology. We propose the security image processing system to improve efficiency and we implement the real-time status monitoring system to surveil the object in the building energy management system. In this paper, we proposed the system of LED control using Zigbee network for connect the server. User is able to control LED light and monitering by the desktop. We implemented LED light control software on the based of Real-time monitering and LED control. Also detect human body movement.

• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.248-249
• /
• 2008

본 논문에서는 원칩 마이크로컨트롤러를 사용한 파워 LED 구동제어 시스템의 설계 및 구현에 대해 중점적으로 기술한다. 파워 LED의 조광제어 및 특정 조도에서의 정전류 구동을 위해 전류피드백을 통한 디지털 PI 전류제어 및 PWM 구동방식을 행하였고, 시각적인 깜박거림 없는 충분한 주파수의 스위칭을 통해 부스트 컨버터를 연속도통모드로 동작시켰다. 본 논문에서 제시한 파워 LED 구동을 위한 디지털 제어시스템은 최근의 에너지 및 환경규제에 적합한 조명관련 응용분야에서 다양하게 적용될 것으로 판단된다.

• Journal of Broadcast Engineering
• /
• v.21 no.5
• /
• pp.760-769
• /
• 2016

This paper proposes a hybrid LED driving circuit and its control method for extension of the color gamut of LED. The proposed hybrid LED driving circuit provides the constant current by switching regulation in the high current and by linear regulation in the low current through LED. Furthermore, the magnitudes of the high current and low current were controlled by CC(Continuous Current) control method and PWM(Pulse Width Modulation) control method, respectively. We experimentally confirmed that the current through RGB LED is linearly controlled to 2% maximum current ratio by varying PWM in the proposed driving circuit and control method. As a result of the measurement of the output light color in CIE1976 chromaticity coordinates, we confirmed that the color, which not be expressed by the existing method, uniformly expressed. We confirmed that the color, which can not be expressed by the existing method, was uniformly output and verified that the color gamut was expanded by the low current controlled by the proposed driving circuit and control method.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.11a
• /
• pp.559-560
• /
• 2009

네트워크를 이용한 LED 조명의 제어는 최근 IP(Internet Protocol)을 이용한 조명 제어와 융합되어 단순한 디밍(Dimming)제어 뿐만 아니라, 미디어 파사드(Media facade), 카이네틱 아트(Kinetic Art)등의 새로운 조명 분야로 범위가 확대 되고 있다. 본 논문에서는 다양화 되는 네트워크 기반의 제어 방식 중 DMX over IP 에 대하여 멀티케스트-다중화 방식(Multicast & Multiplexing)으로 분석 및 시뮬레이션 하였다. 그 결과 1 만개 이상의 채널 수를 가지는 규모가 큰(large volume) 조명 네트워크 시스템의 경우 채널의 개수 증가가 delay-throughput 에 영향이 적음을 알 수 있다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.938-940
• /
• 2012

전세계적으로 친환경, 에너지 절약과 맞물려 LED조명에 대한 관심이 증대되고 있다. 특히 우리나라는 삼면이 바다와 인접해 해안 항만 환경에 대한 관심이 높고, 해안산책로, 공원 등이 늘어나면서 LED 보안등에 대한 수요가 늘고 있는 추세이다. LED보안등의 수요가 늘어나면서 보안등의 주목적인 범죄예방에 대비하면서 에너지를 절감할 수 있는 시스템에 대한 관심이 증대되고 있다. 최근의 조명제어 시스템은 단순히 보행자 유무만을 인식하여 조명의 밝기를 제어하는 시스템이 대다수이며, 비, 바람, 안개, 해무 등의 실시간 변화가 잦은 해안환경에 대한 고려는 부족하다. 따라서, 본 논문에서는 보행자 유무와 비, 안개, 해무 등의 환경적 정보를 융합하여 보안등의 밝기를 통합 제어할 수 있는 스마트 제어 시스템을 설계하고자 한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.5
• /
• pp.1005-1012
• /
• 2016

LED beacons operated on an isolated marine area are mostly employing the solar power supply system, and this system is well known for increasing the cost of management and maintenance. Recently, a number of researches and demonstrations on self-contained LED beacon is actively conducted to solve this issue. In this work, we propose an self-contained LED beacon with Bluetooth Low Energy function for an effective management of LED beacon. Firstly, control program structure is designed by expanding the status protocol of self-contained LED beacon, and then it is implemented into the form which administrator can easily understand. The control system visualizes the status and control data of self-contained LED beacon, and this enables the rapid decision-making of administrator. Also, minimizing electricity consumption of the beacon, it can transfer and update the status or light information of self-contained LED beacons with smart phone.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.1
• /
• pp.28-34
• /
• 2010

The pulse width modulation(PWM) method has been generally used as conventional method controlling luminance of LED(light emitting diode). PWM method as analog method with a relation that duty ratio of LED be proportional to luminance has weak point that it is not compatible with digital method of communication etc. In this paper, a experiment is conducted which the luminance of RGB LED be controlled by digital method. For this, the LED digital control system is developed which consist of LED driving circuits and digital logic circuits. By controlling the number of pluses on RGB LED versus digital input, various lighting colors is implemented and digital codes are optimized in order that measured x, y chromaticity coordinates of lighting colors are comprised in the CIE chromaticity coordinates area of targeted lighting colors. The result of this study can be utilized usefully in research on implementing full color by using remote control of LED lamp with digital communication.